No products in the basket.
Teltonika RMS
Showing 1–15 of 22 results
- 4G Routers, Teltonika, Teltonika 4G Routers
Teltonika RUT200 4G LTE Industrial Cellular Router
The Teltonika RUT200 (RUT200013000) is a compact 4G LTE Cat 4 industrial cellular router with a single Mini SIM, 802.11b/g/n Wi-Fi, and two 10/100 Mbps Ethernet ports in a 125 g aluminium housing. It runs RutOS on a Mediatek 580 MHz processor with a full VPN stack, industrial protocol support, digital I/O, and Teltonika RMS compatibility, operating from -40 to +75 °C.
Key Features:
• 4G LTE Cat 4 – 150 Mbps down / 50 Mbps up; automatic fallback to 3G and 2G
• Single Mini SIM (2FF) with auto APN, band lock, and operator block/allow list
• Wi-Fi 4 (802.11b/g/n) – access point and station modes, up to 50 simultaneous clients
• 1 x WAN + 1 x LAN (10/100 Mbps); WAN port configurable as second LAN via RutOS
• 1 x digital input and 1 x digital output on 4-pin power connector
• Passive PoE input via LAN1 – Mode B, 9-30 V DC (not compatible with 802.3af/at/bt)
• VPN: OpenVPN, IPsec, WireGuard, ZeroTier, GRE, L2TP, DMVPN, SSTP, Tinc
• Modbus TCP, OPC UA, DNP3, MQTT broker/publisher, Azure IoT Hub, AWS IoT Core
• Teltonika RMS compatible – remote management, FOTA, alerts, and VPN tunnels
• CE, UKCA, E-mark certified; IP30; 83 x 25 x 74 mm; 125 gSKU: TELTONIKA-RUT200-N - Teltonika, Teltonika 4G Routers
Teltonika RUT901 Industrial 4G LTE Dual SIM Router
The Teltonika RUT901 (RUT901000600) is a compact industrial 4G LTE Cat 4 dual SIM router with four Ethernet ports and RutOS. Successor to the RUT950 and RUT951, it adds dual SIM failover and a full industrial protocol stack in an aluminium DIN-rail enclosure.
Key Features:
• Dual SIM (2x Mini SIM 2FF) with automatic failover – weak signal, data limit, roaming, network denied
• 4G LTE Cat 4 – 150 Mbps download / 50 Mbps upload
• 4x Ethernet (1x WAN, 3x LAN), 10/100 Mbps with auto MDI/MDIX
• Wi-Fi 4 (802.11b/g/n, 2.4 GHz) – up to 100 simultaneous clients, 2x RP-SMA
• 1x Digital Input, 1x Digital Output on 4-pin power connector
• Passive PoE input on LAN1 (Mode B, 9-30 V DC) – not IEEE 802.3af/at compatible
• VPN: OpenVPN, IPsec, WireGuard, ZeroTier, GRE, PPTP, L2TP, Stunnel, DMVPN, SSTP, Tinc
• Modbus TCP, DNP3, MQTT, Data to Server industrial protocol support
• Teltonika RMS remote management and FOTA firmware update
• Operating temperature -40 to +75 °C, IP30, DIN rail or wall mount (kit sold separately)SKU: TELTONIKA-RUT901-N - 4G CCTV, 4G Routers, Teltonika, Teltonika 4G Routers
Teltonika RUT906 4G LTE Industrial Router
The Teltonika RUT906 (RUT906000200) is a 4G LTE Cat 4 industrial router with RS232, RS485, GNSS, and dual SIM. RS232 and RS485 connect legacy serial equipment directly, with GPS, Modbus RTU, BACnet, DNP3, and DLMS all built in.
Key Features:
• Dual SIM (2x Mini SIM 2FF) with auto-failover – weak signal, data limit, roaming, network denied
• 4G LTE Cat 4 – 150 Mbps download / 50 Mbps upload
• RS232 (DB9, RTS/CTS flow control, 300-115200 baud) and RS485 (full and half-duplex, 300-230400 baud)
• GNSS – GPS with NMEA 0183, NTRIP, geofencing, and AVL server support
• 4x Ethernet (1x WAN, 3x LAN), 10/100 Mbps with auto MDI/MDIX
• Wi-Fi 4 (802.11b/g/n, 2.4 GHz) – up to 100 simultaneous clients, 2x RP-SMA
• Analog input (0-24 V / 4-20 mA), isolated digital input, dry contact input, relay output, open collector outputs
• Modbus RTU/TCP, BACnet (RS485/TCP), DNP3, OPC UA, DLMS/COSEM, MQTT industrial protocols
• VPN: OpenVPN, IPsec, WireGuard, ZeroTier, DMVPN, SSTP, L2TP, Stunnel, Tinc, GRE, PPTP
• Operating temperature -40 to +75 °C, IP30, aluminium housing, DIN rail or wall mount (kit sold separately)SKU: TELTONIKA-RUT906-N - 4G CCTV, 4G Routers, Teltonika, Teltonika 4G Routers
Teltonika RUT956 4G LTE Industrial Router
The Teltonika RUT956 is a rugged industrial 4G LTE router with dual-SIM failover, GPS/GNSS, RS232 and RS485 serial ports, digital I/O, WiFi, and advanced RutOS security. Ideal for CCTV, SCADA/telemetry, EV chargers, kiosks, solar sites, and remote monitoring. Securely deploy with multi-network IoT SIMs, RMS remote management, and external antenna options.
Key Features
- Industrial 4G LTE CAT4 router with dual-SIM failover
- RS232 + RS485 for SCADA, PLC and telemetry integration
- GPS/GNSS for tracking and location-aware deployments
- 2.4GHz WiFi hotspot or client mode
- 1× WAN + 3× LAN with VLAN support
- Digital I/O for sensors, relays and remote control
- Powered by RutOS with VPN, firewall, Modbus and MQTT
- RMS compatible for secure remote management and VPN Hub
- External LTE, WiFi and GNSS antennas included
- Ideal for CCTV, EV chargers, solar sites, kiosks and industrial monitoring
TELTONIKA RMS | IoT SIM‘s | Datasheet
SKU: TELTONIKA-RUT956-N - 4G Routers, Teltonika, Teltonika 4G Routers
Teltonika RUT281 Global 4G Router
The Teltonika RUT281 is the smallest industrial LTE Cat 4 router in the Teltonika range, built for reliable global 4G connectivity in space-constrained fixed installations. A Telit modem covering 18 LTE bands delivers single-SKU worldwide deployment, with eSIM support for remote SIM provisioning without an on-site visit.
Key Features:
• Global 4G LTE Cat 4 via Telit modem – 150 Mbps down / 50 Mbps up
• 18 LTE bands: B1, B2, B3, B4, B5, B7, B8, B9, B12, B13, B14, B18, B19, B20, B25, B26, B28
• 3G UMTS (7 bands) and 2G GSM (4 bands) fallback for full global coverage
• 1 x Physical Mini SIM (2FF) + eSIM with up to 7 downloadable profiles
• 2 x 10/100 Mbps Ethernet (1 WAN + 1 LAN) with passive PoE on LAN port
• 802.11b/g/n Wi-Fi – Access Point and Station modes, up to 50 clients
• 1 x Digital Input, 1 x Digital Output on 4-pin industrial power connector
• 9-30 VDC input, less than 4W consumption – DIN rail and wall mountable
• Operating temperature -40 to +65 degrees C, IP30 aluminium housing, 83 x 25 x 74 mm
• RutOS with Modbus TCP, OPC UA, DNP3, DLMS/COSEM, full VPN suite and Teltonika RMS supportSKU: TELTONIKA-RUT281-N - 4G Routers, Teltonika, Teltonika 4G Routers
Teltonika RUT981 Global 4G Router
The Teltonika RUT981 is a global 4G Cat 4 industrial router with dual SIM, eSIM, and four Ethernet ports, built for deployments that need worldwide LTE connectivity from a single hardware SKU. Powered by a Telit modem covering 18 LTE bands, it covers Europe, the Americas, Asia-Pacific, and the Middle East with one order code.
Key Features:
• Global 4G LTE Cat 4 via Telit modem – 150 Mbps down / 50 Mbps up
• 18 LTE bands: B1, B2, B3, B4, B5, B7, B8, B9, B12, B13, B14, B18, B19, B20, B25, B26, B28
• Dual physical SIM (Mini SIM 2FF) plus eSIM with Bootstrap provisioning
• WAN failover and load balancing across SIM 1, SIM 2, and eSIM
• 802.11b/g/n Wi-Fi 4 (2.4 GHz), 2×2 MIMO, up to 100 simultaneous clients
• 4x RJ45 (1x WAN, 3x LAN), 10/100 Mbps
• Passive PoE input (9-30 VDC, Mode B) via LAN1 port
• Digital input and digital output on industrial 4-pin power connector
• DIN rail, wall, and flat surface mounting (kit required)
• RutOS with VPN suite, MQTT, Modbus, and Teltonika RMS support
• -40 to +65 degrees C operating range, IP30, aluminium enclosureSKU: TELTONIKA-RUT981-N - 4G Routers, Teltonika, Teltonika 4G Routers
Teltonika RUT986 Global 4G Router
The Teltonika RUT986 is a global 4G LTE Cat 4 industrial router with RS232, RS485, GNSS, comprehensive I/O, and Micro SD storage, built for SCADA, energy, utilities, and industrial IoT deployments requiring serial connectivity alongside cellular. Powered by a Telit modem covering 18 LTE bands worldwide, it replaces regional hardware variants with a single globally-certified unit.
Key Features:
• Global 4G LTE Cat 4 via Telit modem – 150 Mbps down / 50 Mbps up, 3G/2G fallback
• 18 LTE bands: B1, B2, B3, B4, B5, B7, B8, B9, B12, B13, B14, B18, B19, B20, B25, B26, B28
• Dual physical SIM (Mini SIM 2FF) plus eSIM with Bootstrap provisioning (up to 7 eSIM profiles)
• RS232 (DB9) and RS485 full/half duplex serial ports, 300-115200 baud
• GNSS receiver: GPS, GLONASS, BeiDou, Galileo, QZSS – geofencing, NMEA, NTRIP client
• 4 digital/analog inputs and 3 outputs including SPST relay (40V, 4A) and analog 4-20 mA input
• 1x USB-A port, Micro SD slot (up to 2 TB) for local data logging
• Industrial protocols: Modbus, DNP3, OPC UA, BACnet, DLMS/COSEM
• 4x RJ45 (1x WAN, 3x LAN), 10/100 Mbps, passive PoE input via LAN1
• RutOS with VPN suite (OpenVPN, WireGuard, IPsec), VRF, RMS remote management
• -40 to +65 degrees C, IP30, aluminium enclosure, 110 x 50 x 100 mm, 294 gSKU: TELTONIKA-RUT986-N - 4G Routers, Edge Computing, Teltonika, Teltonika 4G Routers
Teltonika RUTC42 Dual Modem 4G Edge Router
4G Routers, Edge Computing, Teltonika, Teltonika 4G RoutersTeltonika RUTC42 Dual Modem 4G Edge Router
The Teltonika RUTC42 is a dual modem 4G LTE Cat 4 edge router built for industrial deployments where connectivity failure is not an option. Two independent LTE Cat 4 modules deliver true hardware-level redundancy with simultaneous failover and load balancing, backed by Docker container support, RutOS, and full Teltonika RMS integration for remote management at scale.
Key Features:
• Dual 4G LTE Cat 4 modems – 150 Mbps down / 50 Mbps up per modem
• Independent SIM failover per modem with automatic switching between physical SIM and eSIM
• 2x eSIM (consumer type, up to 7 profiles each) + 2x Nano SIM physical slots
• Dual-band Wi-Fi 6 (802.11ax) – 2.4 GHz and 5 GHz with MU-MIMO
• Dual-core ARM Cortex-A53 1.3 GHz CPU, 1 GB RAM, 8 GB flash
• Docker container support for local application hosting
• 5x Gigabit Ethernet ports with passive PoE input on LAN1
• 9-50 VDC wide-range power input, DIN rail mountable
• RutOS with VPN, Modbus, MQTT, and industrial protocol support
• Teltonika RMS remote management compatible – 2-year manufacturer warrantySKU: TELONIKA-RUTC42-N - Teltonika, Teltonika IoT Gateways
Teltonika TRB236 Industrial LTE 450 IoT Gateway
The Teltonika TRB236 is an industrial LTE 450 IoT gateway that delivers Cat 1 or Cat 4 connectivity over the 450 MHz band, giving utility and infrastructure operators reliable cellular coverage in hard-to-reach locations. It connects legacy field equipment to IP networks via RS232, RS485, Ethernet, and configurable I/O, with dual SIM and eSIM support for continuous connection continuity.
TRB236 Key Features:
• LTE 450 MHz connectivity – LTE Band 31 (452.5-457.5 MHz), Band 72 (451-456 MHz), and Band 87 (410-415 MHz)
• Choice of LTE Cat 1 or LTE Cat 4 modem variant to match network requirements
• Standard LTE fallback: FDD Bands 1, 3, 7, 8, 20, 28 and TDD Bands 38, 40
• 3G WCDMA fallback on Bands 1, 8
• RS232 and RS485 serial interfaces for legacy equipment integration
• Configurable digital inputs and outputs via 16-pin industrial terminal block
• Dual Nano SIM + eSIM with automatic failover
• 9-57 VDC wide-range power input
• -40 to +40°C operating temperature
• RutOS with Modbus, MQTT, VPN, and full RMS remote management supportTRB236 Flyer (pdf)
SKU: Teltonika TRB236 - Teltonika, Teltonika 4G Routers, Teltonika Accessories, Teltonika RMS
Teltonika RMS
Teltonika RMS Credits
A Block of 12 credits will provide RMS for one device for 12 months.
1 RMS License to license 1 x Teltonika router for 1 month.
Each RMS license provides you with access to the system for one month per device. This package provides 12 licenses to assign to your devices; enough for one year of licensing for a single device. However you can choose to allocate the licenses however you please, such as 2 x routers for 6 months each. Once purchased you receive an electronic invite from us to assign the licenses.
MIMIMUM ORDER IS 12 CREDITS
You can now order as many credits as you require and will receive a single RMS code for that amount of credits.
SKU: TELTONIKA-RMS-1M-CREDIT-N - Teltonika, Teltonika Accessories, Teltonika RMS
Teltonika RMS Management Package – 3 Years
The Teltonika RMS 3-year management package is made to connect one router to RMS for 3 years. Instead of using 36 separate credits you can buy the 3-year management package to put on a router. This is cheaper and easier to manage.
NOTE: The credits in this package are pooled, meaning they can not be used on multiple devices. This pack lets one router use RMS for 3 years, but can not let 3 routers use RMS for 1 year.
SKU: TELTONIKA-RMS-3Y-N - Teltonika, Teltonika Accessories, Teltonika RMS
Teltonika RMS Management Package – 5 Years
The Teltonika RMS 5-year management package is made to connect one router to RMS for 5 years. Instead of using 60 separate credits you can buy the 5-year management package to put on a router. This is cheaper and easier to manage.
NOTE: The credits in this package are pooled, meaning they can not be used on multiple devices. This pack lets one router use RMS for 5 years, but can not let 5 routers use RMS for 1 year.
SKU: TELTONIKA-RMS-5Y-N - Teltonika, Teltonika Accessories, Teltonika RMS
Teltonika RMS Management Package – 10 Years
The Teltonika RMS 10-year management package is made to connect one router to RMS for 10 years. Instead of using 120 separate credits you can buy the 10-year management package to put on a router. This is cheaper and easier to manage.
NOTE: The credits in this package are pooled, meaning they can not be used on multiple devices. This pack lets one router use RMS for 10 years, but can not let 10 routers use RMS for 1 year.
SKU: TELTONIKA-RMS-10Y-N - Teltonika, Teltonika Accessories, Teltonika RMS
Teltonika RMS Management Data 150GB
The 150GB package provides 150GB of data for RMS Connect and RMS VPN for one device, valid for a 10 year period.
NOTE: The data in this pack is only valid for one device and can not be transferred to other devices.
SKU: TELTONIKA-RMS-150GB DATA-N - Network Switches, Networking, POE Switches, Teltonika Switches
Teltonika SWM282 PoE+ Managed Switch (24 x POE+ Ports)
Network Switches, Networking, POE Switches, Teltonika SwitchesTeltonika SWM282 PoE+ Managed Switch (24 x POE+ Ports)
The Teltonika SWM282 is a high-capacity, cloud-enabled managed switch with 24 PoE+ Gigabit Ethernet ports and 4 SFP uplinks. With a total PoE power budget of 300 W, advanced L2+ and L3 features, and full industrial protocol support, it’s the perfect choice for enterprise, CCTV, and industrial networks that need scalable power and performance.
- 24 Gigabit ports with 4 SFP uplinks for high-performance networking
- 24 PoE+ ports delivering up to 30 W per port, 300 W total power budget
- Advanced L2+ and L3 features including VLAN, QoS, and static/dynamic routing
- Industrial protocol support (Profinet, EtherNet/IP, MRP, SNMP)
- RMS cloud management for remote monitoring, updates, and configuration
SKU: TELTONIKA-SWM282-N
