No products in the basket.
DIN rail router
Showing 1–15 of 38 results
- In-Hand Networks, InHand 4G Routers
InHand IR302 Compact Industrial 4G Router
The InHand IR302 (IR302-FQ58-WLAN-S-N) is a compact industrial 4G router for IoT and machine-to-machine sites that need a small, rugged, cloud-managed connection. This is the IR302-FQ58-WLAN-S: LTE Cat 4 for UK, European and APAC networks, with 2.4 GHz Wi-Fi, dual SIM and an RS232/RS485 serial port in a full-metal fanless case.
Key Features:
– Compact industrial 4G LTE Cat 4, up to 150 Mbps down / 50 Mbps up, with 3G and 2G fallback
– Europe/APAC bands (FQ58): 4G FDD B1/B3/B5/B8, TDD B38/B40/B41; 3G B1/B5/B8; 2G B3/B8
– Dual SIM redundancy with ICCID binding and signal-threshold (RSRP) switching
– 2.4 GHz Wi-Fi (802.11 b/g/n), AP, STA or AP+STA, up to 32 clients
– 2 x 10/100 Ethernet: one WAN/LAN switchable, one LAN
– RS232/RS485 serial with DTU (TCP/UDP/MQTT) and Modbus RTU to TCP bridging
– Full VPN suite: IPsec, OpenVPN, WireGuard, ZeroTier, GRE, L2TP, PPTP
– InHand Device Manager and InConnect cloud management
– Wide voltage 9 to 36 V DC, reverse-polarity and surge protection, under 10 W peak
– Full metal, fanless, IP30, DIN rail or wall mount, -40 to +75 degrees C extended
– CE and UKCA certifiedSKU: IR302-FQ58-WLAN-S-N - Milesight, Milesight 4G Routers
Milesight UR32S Lite Series 4G Router with WiFi, 2 x Ethernet (UR32S-L0GEU)
Milesight, Milesight 4G RoutersMilesight UR32S Lite Series 4G Router with WiFi, 2 x Ethernet (UR32S-L0GEU)
The Milesight UR32S-L0GEU is a compact Lite Series industrial 4G LTE Cat 4 router with 2.4 GHz Wi-Fi, two Ethernet ports and automatic failover between a wired WAN and the cellular network. Wi-Fi is the reason to choose it over the UR32L, and it works in both AP and client mode, which lets an engineer bind the router to the M-Sight Pro app from a phone or bring the site online over an existing wireless network.
Key Features:
4G LTE Cat 4 with 3G and 2G fallback, 150 Mbps down / 50 Mbps up
2.4 GHz 802.11b/g/n Wi-Fi, AP mode or client mode
Automatic failover and failback between Ethernet WAN and cellular
1 x Mini SIM (2FF) slot, 1.8 V / 3 V
2 x RJ45 10/100 Mbps Ethernet, 1 x WAN + 1 x LAN or 2 x LAN, 1.5 kV isolation
1 x SMA cellular antenna connector and 1 x RP-SMA Wi-Fi antenna connector
VPN: IPsec, OpenVPN, GRE, L2TP, PPTP and DMVPN
MilesightVPN and M-Sight Pro app support for remote camera and NVR access
Remote management through the Milesight Development Platform and DeviceHub
ARM Cortex-A7 528 MHz, 128 MB DDR3 RAM, 128 MB flash, hardware watchdog
9 to 48 V DC, typical 1.8 W, surge and reverse polarity protection
-40 to +70 degrees C, IP30 metal housing, DIN rail, wall or desktop mountSKU: MILESIGHT-UR32S-L0GEU-N - 4G Routers With POE PSE, Milesight, Milesight 4G Routers
Milesight UR32S Lite Series 4G Router with WiFi, 2 x Ethernet and POE Out (UR32S-L0GEU-P)
4G Routers With POE PSE, Milesight, Milesight 4G RoutersMilesight UR32S Lite Series 4G Router with WiFi, 2 x Ethernet and POE Out (UR32S-L0GEU-P)
The Milesight UR32S-L0GEU-P is a compact Lite Series industrial 4G LTE Cat 4 router with 802.3af/at PoE PSE output on both LAN ports, 2.4 GHz Wi-Fi and automatic failover between a wired WAN and cellular. It powers an IP camera, access point or door reader directly from the router, which removes the injector from the enclosure and leaves one device to install, power and maintain at a remote site.
Key Features:
802.3af/at PoE PSE on both LAN ports, 30 W per port and 60 W total
Ships with the 48 V UK mains PSU that the PoE ports require, no extra supply to buy
4G LTE Cat 4 with 3G and 2G fallback, 150 Mbps down / 50 Mbps up
2.4 GHz 802.11b/g/n Wi-Fi, AP mode or client mode
Automatic failover and failback between Ethernet WAN and cellular
1 x Mini SIM (2FF) slot, 1.8 V / 3 V
2 x RJ45 10/100 Mbps Ethernet, 1.5 kV isolation
1 x SMA cellular antenna connector and 1 x RP-SMA Wi-Fi antenna connector
VPN: IPsec, OpenVPN, GRE, L2TP, PPTP and DMVPN
MilesightVPN and M-Sight Pro app support for remote camera and NVR access
Remote management through the Milesight Development Platform and DeviceHub
-40 to +70 degrees C, IP30 metal housing, DIN rail, wall or desktop mountSKU: MILESIGHT-UR32S-L0GEU-P - 4G Routers With POE PSE, Robustel
Robustel R2120 POE 4G Router, Ethernet and Wifi 5
The Robustel R2120 is an industrial dual-SIM 4G router with four PoE-PSE Ethernet ports. It powers and connects remote IP cameras, sensors and access controls from a single unit, with RCMS cloud management built in.
Key Features:
– Four PoE-PSE ports (802.3af/at), up to 30 W per port
– Dual Mini SIM (2FF) 4G LTE with automatic failover once configured
– 5 x Gigabit Ethernet: 1 x WAN + 4 x LAN, or 5 x LAN
– Dual-band Wi-Fi, 802.11ac 2×2 MIMO, access point or client mode
– RS-485 serial with Modbus RTU to TCP gateway
– 2 x digital input and 2 x digital output, opto-isolated
– RobustOS with C/C++ SDK and full VPN suite
– IPsec, OpenVPN, WireGuard and GRE VPN
– RCMS cloud management with remote PoE device reboot
– Aluminium housing, -20 to +70 degrees C, DIN rail, wall or desktop mountSKU: ROBUSTEL-R2120-4G-POE-ROUTER-A015000004-N - CAT6 4G Router, Teltonika, Teltonika 4G Routers
Teltonika RUT261 Compact CAT6 LTE 4G Router with WiFi and Ethernet
CAT6 4G Router, Teltonika, Teltonika 4G RoutersTeltonika RUT261 Compact CAT6 LTE 4G Router with WiFi and Ethernet
The Teltonika RUT261 is a compact 4G LTE Cat 6 industrial router for space-constrained and embedded installations. Carrier aggregation lifts it to 300 Mbps download, so it holds the small RUT200 footprint while adding real Cat 6 speed.
Key features:
– 4G LTE Cat 6 with carrier aggregation, 300 Mbps down and 50 Mbps up
– Single Mini SIM (2FF) with external front-panel holder
– Wi-Fi 4 (802.11b/g/n) access point and station, WPA3, up to 50 clients
– 2 x Fast Ethernet ports, 1 WAN and 1 LAN, WAN reconfigurable as LAN
– 1 x digital input and 1 x digital output on the 4-pin power connector
– Passive PoE input on LAN1, 9 to 30 V DC, Mode B
– Full RutOS: OpenVPN, WireGuard, IPsec, Modbus TCP, DNP3, OPC UA, MQTT
– Teltonika RMS remote management and monitoring
– 9 to 30 V DC input, reverse polarity and surge protection, -40 to 75 degrees C
– Aluminium housing, 83 x 25 x 74 mm, IP30, DIN rail mountable
– RUT261AADAA0 is the part code for the RUT261 with UK PSUSKU: TELTONIKA-RUT261-N - 5G Routers, Edge Computing, Teltonika, Teltonika 5G Routers
Teltonika RUTC54 Global 5G Edge Router
The Teltonika RUTC54 is a global 5G edge router for centrally managed industrial and distributed networks. It runs Docker on the device, pairs dual SIM with integrated eSIM for carrier failover, and delivers Wi-Fi 6 alongside global 5G on a Telit modem.
Key features:
Global 5G Sub-6 GHz on a Telit modem, up to 3.4 Gbps down (4×4 MIMO) and 900 Mbps up (2×2 MIMO)
4G LTE Cat 19 fallback, up to 1.6 Gbps down and 211 Mbps up
Docker container support for edge applications on the router itself
Dual-band Wi-Fi 6 (802.11ax), up to 2402 Mbps on 5 GHz, MU-MIMO, up to 512 clients
Dual SIM plus integrated eSIM with configurable auto-failover
5 x Gigabit Ethernet, 1 x WAN (configurable as LAN) and 4 x LAN
Dual-core Arm Cortex-A53 at 1.3 GHz, 1 GB DDR4 RAM, 8 GB eMMC flash
GNSS positioning: GPS, GLONASS, BeiDou, Galileo and QZSS, with geofencing
RutOS with full VPN suite, RMS remote management and TPM 2.0
Anodised aluminium build, DIN rail or wall mount, -40 to 75 degrees CSKU: TELTONIKA-RUTC54-N - Ethernet Routers
Teltonika RUTX10 Professional Ethernet Router (4 x GB Ethernet), WiFi and Bluetooth
The Teltonika RUTX10 is a non-cellular industrial router with Gigabit Ethernet, dual-band Wi-Fi 5 and built-in Bluetooth LE. It gathers Bluetooth sensor data and routes it over a wired or Wi-Fi connection, so it suits sites that already have fixed backhaul and need a BLE hub rather than a modem.
Key Features:
– Bluetooth Low Energy with a dedicated RP-SMA antenna connector
– 4 x Gigabit Ethernet ports, 1 x WAN (configurable as LAN) and 3 x LAN
– Dual-band Wi-Fi 5 (802.11ac Wave-2) with MU-MIMO, up to 867 Mbps
– No cellular modem and no SIM slot, wired or Wi-Fi backhaul only
– Quad-core ARM Cortex A7 CPU, 256 MB RAM, 256 MB flash
– RutOS with OpenVPN, IPsec, DMVPN and firewall
– USB 2.0 for storage, USB-to-serial and external devices
– 1 x digital input and 1 x digital output for monitoring and control
– 9 to 50 V DC power, passive PoE over the LAN port
– DIN rail mountable, -40 to +75 degrees C, IP30
– Teltonika RMS remote management compatible
– 2-year manufacturer warranty
– RUTX10000300 / Standard package with UK PSUSKU: TELTONIKA-RUTX10-N - Teltonika, Teltonika 4G Routers, Teltonika eSIM Routers
Teltonika RUT286 Global LTE Cat 4 Router
The Teltonika RUT286 (RUT286AAAAA0) is an industrial global LTE Cat 4 router with integrated eSIM, dual Mini SIM slots, RS232 and RS485 serial interfaces, and support for 4G bands across Europe, the Americas, Asia-Pacific, and Africa. Powered by a Telit modem and running RutOS, it combines Modbus TCP/RTU, DNP3, DLMS/COSEM, OPC UA, and BACnet with flexible 9-57 V DC or PoE power input in a compact anodised aluminium enclosure.
Key Features:
• Global LTE Cat 4 via Telit modem – 150 Mbps down / 50 Mbps up, with 3G/2G fallback
• Integrated eSIM (consumer type, up to 7 profiles) plus 2 x Mini SIM (2FF) slots
• RS232 and RS485 on a single 6-pin terminal block with Modbus RTU/TCP, DNP3, DLMS, OPC UA, BACnet
• 9-57 V DC industrial power input plus active 802.3af PoE and passive PoE (16-57 V DC) on LAN port
• 802.11b/g/n Wi-Fi with Access Point and Station modes, up to 50 simultaneous clients
• 1 x WAN + 1 x LAN, 10/100 Mbps Ethernet (WAN configurable as LAN)
• Micro SD slot supporting up to 2 TB (FAT32, NTFS, ext2/3/4)
• Full RutOS VPN suite: OpenVPN, IPsec, WireGuard, ZeroTier, GRE, DMVPN, L2TP, Stunnel, SSTP, Tinc
• Teltonika RMS remote management and FOTA support
• Operating temperature -40 to +65 °C, IP30, anodised aluminium housing, 132 gSKU: TELTONIKA-RUT286AAAAA0-N - IoT 4G Gateway, Milesight, Milesight 4G Routers
Milesight UR41 4G Cat 4 Mini Industrial Router with GPS
IoT 4G Gateway, Milesight, Milesight 4G RoutersMilesight UR41 4G Cat 4 Mini Industrial Router with GPS
The Milesight UR41 (UR41-L08EU) is a compact 4G LTE Cat 4 industrial router built for embedded IoT deployments where space, power budget, and serial device connectivity all matter. At 70 x 55 x 22 mm and 103 g, it combines RS232/RS485, digital I/O, GPS/GNSS, and a hardware watchdog in a metal IP30 enclosure rated to -40 to +60 °C.
Key Features:
• 4G LTE Cat 4 – up to 150 Mbps down / 50 Mbps up, with 3G/2G fallback
• GPS/GNSS – GPS, GLONASS, BeiDou, Galileo, QZSS, 2.5 m CEP accuracy
• RS232 or RS485 (software switchable) – Modbus RTU/TCP, transparent serial, DLMS client
• 1 x digital input + 1 x digital output, galvanically isolated, 3.5 mm terminal block
• Dual power input: 5-24 V DC terminal block or 5 V USB Type-C
• Power-saving standby and idle modes – 6.3 mA standby at 12 V
• Hardware watchdog for automatic recovery from cellular or system failures
• VPN support: IPsec, OpenVPN, WireGuard, GRE, L2TP, PPTP, DMVPN, ZeroTier
• Remote management via Milesight Development Platform and MilesightVPN
• Desk, wall, and DIN rail mounting – 70 x 55 x 22 mm, 103 gSKU: MILESIGHT-UR41-L08EU-N - Milesight, Milesight 4G Routers
Milesight UR41L 4G Cat 1 Mini Industrial Router
The Milesight UR41L (UR41L-L0CEU) is a compact 4G LTE Cat 1 industrial router built for cost-sensitive M2M and IoT deployments where low power consumption and serial device connectivity matter more than peak throughput. At 70 x 55 x 22 mm and 103 g, it combines RS232/RS485, galvanically isolated digital I/O, and a hardware watchdog in a metal IP30 enclosure rated to -40 to +60 °C.
Key Features:
• 4G LTE Cat 1 connectivity for low-throughput M2M and IoT applications
• RS232 or RS485 (software switchable) – Modbus RTU/TCP, transparent serial, DLMS client
• 1 x digital input + 1 x digital output, galvanically isolated, 3.5 mm terminal block
• Dual power input: 5-24 V DC terminal block or 5 V USB Type-C
• Ultra-low standby power: 6.3 mA at 12 V – suitable for battery and solar-powered installs
• Hardware watchdog for automatic recovery from cellular or system failures
• VPN support: IPsec, OpenVPN, WireGuard, GRE, L2TP, PPTP, DMVPN, ZeroTier
• Remote management via Milesight DeviceHub and MilesightVPN
• Scheduled wake, SMS wake, and DI wake for power-managed deployments
• Desk, wall, and DIN rail mounting – 70 x 55 x 22 mm, 103 gSKU: MILESIGHT-UR41L-L0CEU - 4G Routers, Milesight, Milesight 4G Routers
Milesight UR32L-L0GEU 4G Router with 2 x Ethernet
The Milesight UR32L (UR32L-L0GEU) is a compact industrial 4G LTE Cat 4 router built for M2M and remote monitoring deployments where reliable cellular WAN and Ethernet connectivity are the only requirements. It carries a full VPN stack including WireGuard and OpenVPN, supports remote fleet management via the Milesight Development Platform, and draws just 1.8 W in normal operation.
Key Features:
• 4G LTE Cat 4 – 150 Mbps down / 50 Mbps up, with 3G/2G fallback
• Single Mini SIM (2FF), 1.8 V / 3 V
• 2x RJ45 10/100 Mbps Ethernet – 1x WAN + 1x LAN, configurable as 2x LAN
• Automatic WAN failover from Ethernet to cellular on link loss
• VPN – OpenVPN, IPsec, WireGuard, ZeroTier, GRE, L2TP (client), PPTP (client), DMVPN (spoke)
• Remote management via DeviceHub and Milesight Development Platform
• SNMP v1/v2c/v3, TR-069, SMS management and on-demand dial-up
• Hardware watchdog with automatic recovery
• Typical 1.8 W power consumption, 9-48 V DC input
• Operating temperature -40 to +70°C, IP30, DIN rail and wall mount, 3-year warrantySKU: MILESIGHT-UR32L-L0GEU-N - 4G CCTV, 4G Routers, 4G Routers With POE PSE, Milesight, Milesight 4G Routers
Milesight UR32L-L0GEU-P 4G Router with PoE
4G CCTV, 4G Routers, 4G Routers With POE PSE, Milesight, Milesight 4G RoutersMilesight UR32L-L0GEU-P 4G Router with PoE
The Milesight UR32L Lite with POE (UR32L-L0GEU-P) is a compact industrial 4G LTE Cat 4 router with 802.3af/at PoE PSE output on both LAN ports, combining cellular WAN and the ability to power IP cameras or other PoE devices directly from a single unit. It carries a full VPN stack, supports remote fleet management via the Milesight Development Platform, and draws 1.8 W in normal operation – rising when PoE devices are connected.
Key Features:
• 4G LTE Cat 4 – 150 Mbps down / 50 Mbps up, with 3G/2G fallback
• Single Mini SIM (2FF), 1.8 V / 3 V
• 2x RJ45 10/100 Mbps Ethernet – 1x WAN + 1x LAN, configurable as 2x LAN
• 802.3af/at PoE PSE on both LAN ports – up to 30 W per port, 60 W total (48 V DC input required)
• Automatic WAN failover from Ethernet to cellular on link loss
• VPN – OpenVPN, IPsec, WireGuard, ZeroTier, GRE, L2TP (client), PPTP (client), DMVPN (spoke)
• Remote management via DeviceHub and Milesight Development Platform
• SNMP v1/v2c/v3, TR-069, SMS management and on-demand dial-up
• Hardware watchdog with automatic recovery
• Operating temperature -40 to +70°C, IP30, DIN rail and wall mount, 3-year warrantySKU: MILESIGHT-UR32L-L0GEU-P - 4G Routers, Milesight, Milesight 4G Routers
Milesight UR32 Pro Series 4G Router with Serial (RS232/RS485), 2 x Ethernet, DIO (UR32-L0GEU-485)
4G Routers, Milesight, Milesight 4G RoutersMilesight UR32 Pro Series 4G Router with Serial (RS232/RS485), 2 x Ethernet, DIO (UR32-L0GEU-485)
The Milesight UR32-L0GEU-485 is the entry point to the UR32 Pro Series: a compact industrial 4G LTE Cat 4 router with dual SIM failover, a software-selectable RS232/RS485 serial port, two Ethernet ports and galvanically isolated digital I/O. It carries no Wi-Fi radio, no GPS and no PoE PSE output, which makes it the right specification for panel-mounted telemetry where the only requirements are cellular backhaul and serial equipment integration.
Key Features:
4G LTE Cat 4 – 150 Mbps down / 50 Mbps up, with 3G and 2G fallback
Dual Mini SIM (2FF), 1.8 V / 3 V, with automatic carrier failover
1 x RS232/RS485 serial port, software selectable in the web UI
Modbus RTU to Modbus TCP gateway, plus transparent TCP, UDP, MQTT and DLMS client modes
2 x RJ45 10/100 Mbps Ethernet, 1 x WAN + 1 x LAN or 2 x LAN, 1.5 kV isolation
1 x digital input and 1 x digital output, galvanic isolation, 3.5 mm terminal block
MicroSD slot for local logging and extended storage
VPN: OpenVPN, IPsec, WireGuard, ZeroTier, GRE, L2TP, PPTP, DMVPN spoke
Python SDK for edge logic on the router itself
Ships with a 12 V UK mains PSU, runs from any 9 to 48 V DC rail, typical 1.9 W
-40 to +70 degrees C, IP30 metal housing, DIN rail or wall mount
3-year manufacturer warrantySKU: MILESIGHT-UR32-L0GEU-485 - 4G Routers, Milesight, Milesight 4G Routers
Milesight UR32 Pro Series 4G Router with Serial (RS232/RS485), WiFi, 2 x Ethernet, DIO (UR32-L0GEU-W-485)
4G Routers, Milesight, Milesight 4G RoutersMilesight UR32 Pro Series 4G Router with Serial (RS232/RS485), WiFi, 2 x Ethernet, DIO (UR32-L0GEU-W-485)
The Milesight UR32-L0GEU-W-485 is a compact industrial 4G LTE Cat 4 router with dual SIM failover, 2.4 GHz Wi-Fi, and RS485 serial connectivity for direct integration with Modbus instruments and industrial equipment. It runs from 9 to 48 V DC, mounts on a DIN rail or wall, and operates from -40 to +70°C.
Key Features:
• 4G LTE Cat 4 – 150 Mbps down / 50 Mbps up, with automatic 3G/2G fallback
• Dual Mini SIM (2FF) with automatic carrier failover
• 2x RJ45 10/100 Mbps Ethernet – 1x WAN + 1x LAN, configurable as 2x LAN
• 802.11b/g/n Wi-Fi 2.4 GHz – AP and client modes, up to 15 simultaneous connections
• RS232/RS485 serial port (software selectable) – Modbus RTU/TCP gateway, transparent TCP, UDP, MQTT, and DLMS modes
• 1x digital input + 1x digital output, galvanic isolation, SMS and MQTT triggers
• MicroSD slot for local data logging and extended storage
• VPN – OpenVPN, IPsec, WireGuard, ZeroTier, GRE, L2TP, PPTP, DMVPN
• Python SDK for custom edge application development
• Operating temperature -40 to +70°C, IP30, DIN rail and wall mountSKU: MILESIGHT-UR32-L0GEU-W-485 - 4G CCTV, 4G Routers With POE PSE, Milesight, Milesight 4G Routers
Milesight UR32 Pro Series 4G Router with POE Out, Serial (RS232/RS485), WiFi, 2 x Ethernet, DIO (UR32-L0GEU-P-W-485)
4G CCTV, 4G Routers With POE PSE, Milesight, Milesight 4G RoutersMilesight UR32 Pro Series 4G Router with POE Out, Serial (RS232/RS485), WiFi, 2 x Ethernet, DIO (UR32-L0GEU-P-W-485)
The Milesight UR32-L0GEU-P-W-485 is a compact industrial 4G LTE Cat 4 router with dual SIM, built-in 802.3af/at PoE PSE output, 2.4 GHz Wi-Fi, and RS485 serial connectivity for industrial equipment integration. It delivers 4G cellular backhaul and can power IP cameras or other PoE devices directly from the same unit, removing the need for a separate injector on remote installations.
Key Features:
• 4G LTE Cat 4 – 150 Mbps down / 50 Mbps up, with 3G/2G fallback
• Dual Mini SIM (2FF) with automatic carrier failover
• 802.3af/at PoE PSE on both LAN ports – up to 30 W per port, 60 W total (48 V DC input required)
• 802.11b/g/n Wi-Fi 2.4 GHz – AP and client modes, up to 15 simultaneous connections
• RS485 serial port with Modbus RTU/TCP gateway and transparent TCP/MQTT modes
• 1x digital input + 1x digital output, galvanic isolation
• MicroSD slot for local data logging and extended storage
• VPN support – OpenVPN, IPsec, WireGuard, ZeroTier, GRE, L2TP, PPTP, DMVPN
• Python SDK for custom application and edge logic development
• Operating temperature -40 to +70°C, DIN rail and wall mount, 9-48 V DC inputSKU: MILESIGHT-UR32-L0GEU-P-W-485-N
