No products in the basket.
The Router Store – The UK’s leading IoT and M2M Connectivity Specialists
The Router Store is a Teltonika Diamond Partner and a leading online store for M2M and IoT Connectivity Solutions – browse our store or call 0300 124 6181 for expert guidance and support.
Shop
Showing 1–15 of 415 results
- Fullband 4G Antennas, Victron Energy Antennas
Combo LTE / GPS Outdoor Antenna For Victron Energy GX LTE 4G Modem
Fullband 4G Antennas, Victron Energy AntennasCombo LTE / GPS Outdoor Antenna For Victron Energy GX LTE 4G Modem
Outdoor combination antenna providing 1 × LTE and 1 × GPS connection for the Victron GX LTE modem and other compatible cellular equipment. Supplied with a stand-off wall bracket, two 3-metre LBC100 cables and SMA male connectors. IP67-rated for exposed outdoor installations.
- 5dBi Peak Gain
- 1 x LTE Antenna
- 1 x GPS Antenna
- 2 x 3m Long Low Loss Cables
- SMA Connectors
- Weatherproof IP67
SKU: FB-COMBO-LGX-3M - 4G Signal Analyser
CSL Signal Analyser 2 – 4G Signal Tester
The CSL Signal Analyser 2 is a handheld cellular signal tester that surveys 2G and 4G networks to find the strongest signal before you install a router, alarm, or IoT device. It works with no SIM, pairs with a companion app over Bluetooth, and exports PDF survey reports on site.
Key features:
- Surveys live signal strength across 2G/GSM and 4G/LTE networks
- No SIM card required
- Single network, multi-network, and live analytic survey modes
- Exports shareable PDF survey reports
- Pairs with a companion app over Bluetooth, with app-based firmware updates
- Connects to an existing aerial via MMCX, with an MMCX to SMA adaptor supplied
- Wide LTE band coverage including B1, B3, B5, B7, B8, B20 and B28
- USB-C rechargeable, 73 g, 150 mm x 74 mm x 18 mm
- App available in 11 languages
- 2 year warranty
SKU: CSL-SIGNAL-ANALYSER-2 - D-Link
DWM-313 Industrial 4G Router from D-Link
D-Link DWM-313 Compact Industrial 4G Router
- 4G LTE speeds of up to 150 Mbps for fast Internet access and data transfer
- Wi-Fi speeds of up to 150 Mbps to connect multiple Wi-Fi devices
- 1 x Micro SD card slot is specifically designed for data log storage
- 1 x Fast Ethernet WAN/LAN port configurable as wired WAN access
- 1 x Fast Ethernet LAN port for reliable wired connectivity
- 2 x SIM slots for cellular WAN failover redundancy
- Durable zinc-plated steel case is corrosion-resistant to ensure device longevity
- -30 to 70°C operating temperature to resist harsh environments
- Wall mounting and DIN-rail allow for optimal device placement
SKU: DWM-313 - Semtech
Semtech / Sierra Wireless 2000522 DC Power and I/O Cable
The Semtech 2000522 is the genuine Sierra Wireless AirLink DC power and I/O cable, terminating a keyed 4-pin Molex connector to bare flying leads. It carries DC power and digital I/O to AirLink GX, ES, LS, RV, MP70 and LX gateways from a hardwired DC supply.
Key features:
– Genuine Semtech (Sierra Wireless) AirLink accessory, part number 2000522
– 4-pin Molex connector to stripped bare-wire ends for terminal, fused-supply or vehicle wiring
– Carries the DC supply and the gateway digital I/O on a single connector
– Fits AirLink ES440, ES450, GX400, GX440, GX450, LS300, RV50, RV50X, RV55, MP70, LX40 and LX60
– 3048 mm (10 ft) of UL2464 20 AWG 4-core cable
– Colour-coded leads: red power, black ground, white and green I/O
– Direct replacement for a lost or damaged original AirLink power cable
– UK stock, next-working-day dispatch if ordered by 3:00 PMSKU: Semtech-2000522-3m-power-cable - Victron Energy Antennas
Sentinel MA252 Adhesive Mount 2in1 GNSS & LTE Antenna
The Taoglas Sentinel MA252 is a compact, IP67-rated combination antenna containing one cellular antenna and one active GNSS antenna.
Two separate 2-metre cables provide independent connections for LTE and GPS/GNSS. The low-profile housing attaches to glass or plastic using automotive-grade 3M adhesive, making it ideal for vehicle tracking, telematics, remote monitoring and other connected transport applications.
Please note: the MA252 has one cellular connection and one GNSS connection. It is not a 2×2 MIMO cellular antenna.
Key features
- 2-in-1 cellular and GNSS antenna
- One LTE, 4G, 3G and 2G antenna element
- One active GPS, GLONASS, Galileo and BeiDou antenna element
- Two separate 2-metre coaxial cables
- SMA male connector on each cable
- Low-loss CFD-200 cellular cable
- RG-174 GNSS cable
- Cellular frequency coverage from 698MHz to 3600MHz
- Active GNSS antenna with integrated LNA and filter
- Adhesive mounting for glass and plastic surfaces
- Automotive-grade 3M foam adhesive
- Low-profile housing measuring only 14mm high
- IP67 weatherproof construction
- Suitable for internal or external vehicle installation
- Operating temperature from -40°C to +85°C
SKU: TAOGLAS-SENTINEL-MA252-MA252ALB001-LTE-GNS-Antenna-BLACK-2M - Antenna Accessories
SMA Female to SMA Male Right Angle 90 Degree Adapter
A compact 90-degree SMA male-to-female adaptor for cellular antennas. It allows an antenna or coaxial cable to connect at a right angle, reducing cable strain and providing easier access in tight installations. Suitable for compatible 4G and 5G routers, modems and cellular equipment. The image shows both connector ends of the same adaptor.
SKU: SMA-M-F-RIGHT-ANGLE-ADAPTER - Teltonika Accessories
Teltonika PR327NP0 DIN RAIL POWER SUPPLY, 120 W, 48 V
PR327NP0
The Teltonika 120W DIN rail power supply provides a reliable 48V DC output for industrial networking, automation and control-panel installations. It accepts a universal 100–240V AC input and delivers up to 2.5A, with screw-terminal connections, short-circuit protection and a wide operating temperature range.
SKU: TELTONIKA-PR327NP0 - 4G Routers, Edge Computing, Teltonika, Teltonika 4G Routers, Teltonika eSIM Routers
Teltonika RUTC16 Global 4G CAT6 Edge Router
4G Routers, Edge Computing, Teltonika, Teltonika 4G Routers, Teltonika eSIM RoutersTeltonika RUTC16 Global 4G CAT6 Edge Router
The Teltonika RUTC16 is a global 4G LTE Cat 6 edge router built for industrial and IoT deployments that need local compute at the network edge. It combines a worldwide Telit Cat 6 modem, dual SIM plus eSIM, Wi-Fi 6 and Docker container support with 1 GB of RAM and 8 GB of eMMC storage in a rugged aluminium enclosure.
Key features:
• Global 4G LTE Cat 6 via Telit modem: 300 Mbps down, 50 Mbps up
• Dual SIM plus consumer eSIM (up to 7 profiles) with configurable auto-failover
• Docker container support for edge applications on RutOS
• Dual-band Wi-Fi 6 (802.11ax) with MU-MIMO, up to 512 clients
• Dual-core 1.3 GHz ARM Cortex-A53 CPU, 1 GB DDR4 RAM, 8 GB eMMC flash
• 5x Gigabit Ethernet (1 WAN configurable as LAN, 4 LAN)
• Built-in GNSS: GPS, GLONASS, BeiDou, Galileo, QZSS
• USB 2.0 host port plus digital input and digital output
• 9-50 V DC input with passive PoE (Mode B), DIN rail mount, -40 to +75 degrees C
• RutOS with OpenVPN, WireGuard, IPsec, Modbus TCP, DNP3, MQTT and RMS supportSKU: TELTONIKA-RUTC16 - In-Hand Networks, InHand 4G Routers
InHand IR302 Compact Industrial 4G Router
The InHand IR302 (IR302-FQ58-WLAN-S-N) is a compact industrial 4G router for IoT and machine-to-machine sites that need a small, rugged, cloud-managed connection. This is the IR302-FQ58-WLAN-S: LTE Cat 4 for UK, European and APAC networks, with 2.4 GHz Wi-Fi, dual SIM and an RS232/RS485 serial port in a full-metal fanless case.
Key Features:
– Compact industrial 4G LTE Cat 4, up to 150 Mbps down / 50 Mbps up, with 3G and 2G fallback
– Europe/APAC bands (FQ58): 4G FDD B1/B3/B5/B8, TDD B38/B40/B41; 3G B1/B5/B8; 2G B3/B8
– Dual SIM redundancy with ICCID binding and signal-threshold (RSRP) switching
– 2.4 GHz Wi-Fi (802.11 b/g/n), AP, STA or AP+STA, up to 32 clients
– 2 x 10/100 Ethernet: one WAN/LAN switchable, one LAN
– RS232/RS485 serial with DTU (TCP/UDP/MQTT) and Modbus RTU to TCP bridging
– Full VPN suite: IPsec, OpenVPN, WireGuard, ZeroTier, GRE, L2TP, PPTP
– InHand Device Manager and InConnect cloud management
– Wide voltage 9 to 36 V DC, reverse-polarity and surge protection, under 10 W peak
– Full metal, fanless, IP30, DIN rail or wall mount, -40 to +75 degrees C extended
– CE and UKCA certifiedSKU: IR302-FQ58-WLAN-S-N - Milesight Accessories
Milesight Active GPS Antenna – RA03
The Milesight RA03 is an external GPS antenna for Milesight industrial cellular routers fitted with GNSS. It moves the receiving element outside the router enclosure so the GNSS receiver gets a clear view of the sky, which is where positioning succeeds or fails.
Key Features:
• Compatible with the Milesight UF31, UR32, UR35, UR41 and UR75
• Connects to the dedicated 50 ohm SMA GNSS port on compatible routers
• Feeds the router’s GPS, GLONASS, BeiDou, Galileo and QZSS reception
• External mounting for a clear sky view away from metal cabinets and vehicle bodywork
• Position data is available over NMEA0183 and PMTK from the router
• Supplied by Milesight as the matched GNSS antenna for its cellular router range
• Optional accessory, ordered separately from the routerSKU: MILESIGHT-ACTIVE-GPS-ANTENNA - Milesight, Milesight 4G Routers
Milesight UR32S Lite Series 4G Router with WiFi, 2 x Ethernet (UR32S-L0GEU)
Milesight, Milesight 4G RoutersMilesight UR32S Lite Series 4G Router with WiFi, 2 x Ethernet (UR32S-L0GEU)
The Milesight UR32S-L0GEU is a compact Lite Series industrial 4G LTE Cat 4 router with 2.4 GHz Wi-Fi, two Ethernet ports and automatic failover between a wired WAN and the cellular network. Wi-Fi is the reason to choose it over the UR32L, and it works in both AP and client mode, which lets an engineer bind the router to the M-Sight Pro app from a phone or bring the site online over an existing wireless network.
Key Features:
4G LTE Cat 4 with 3G and 2G fallback, 150 Mbps down / 50 Mbps up
2.4 GHz 802.11b/g/n Wi-Fi, AP mode or client mode
Automatic failover and failback between Ethernet WAN and cellular
1 x Mini SIM (2FF) slot, 1.8 V / 3 V
2 x RJ45 10/100 Mbps Ethernet, 1 x WAN + 1 x LAN or 2 x LAN, 1.5 kV isolation
1 x SMA cellular antenna connector and 1 x RP-SMA Wi-Fi antenna connector
VPN: IPsec, OpenVPN, GRE, L2TP, PPTP and DMVPN
MilesightVPN and M-Sight Pro app support for remote camera and NVR access
Remote management through the Milesight Development Platform and DeviceHub
ARM Cortex-A7 528 MHz, 128 MB DDR3 RAM, 128 MB flash, hardware watchdog
9 to 48 V DC, typical 1.8 W, surge and reverse polarity protection
-40 to +70 degrees C, IP30 metal housing, DIN rail, wall or desktop mountSKU: MILESIGHT-UR32S-L0GEU-N - 4G Routers With POE PSE, Milesight, Milesight 4G Routers
Milesight UR32S Lite Series 4G Router with WiFi, 2 x Ethernet and POE Out (UR32S-L0GEU-P)
4G Routers With POE PSE, Milesight, Milesight 4G RoutersMilesight UR32S Lite Series 4G Router with WiFi, 2 x Ethernet and POE Out (UR32S-L0GEU-P)
The Milesight UR32S-L0GEU-P is a compact Lite Series industrial 4G LTE Cat 4 router with 802.3af/at PoE PSE output on both LAN ports, 2.4 GHz Wi-Fi and automatic failover between a wired WAN and cellular. It powers an IP camera, access point or door reader directly from the router, which removes the injector from the enclosure and leaves one device to install, power and maintain at a remote site.
Key Features:
802.3af/at PoE PSE on both LAN ports, 30 W per port and 60 W total
Ships with the 48 V UK mains PSU that the PoE ports require, no extra supply to buy
4G LTE Cat 4 with 3G and 2G fallback, 150 Mbps down / 50 Mbps up
2.4 GHz 802.11b/g/n Wi-Fi, AP mode or client mode
Automatic failover and failback between Ethernet WAN and cellular
1 x Mini SIM (2FF) slot, 1.8 V / 3 V
2 x RJ45 10/100 Mbps Ethernet, 1.5 kV isolation
1 x SMA cellular antenna connector and 1 x RP-SMA Wi-Fi antenna connector
VPN: IPsec, OpenVPN, GRE, L2TP, PPTP and DMVPN
MilesightVPN and M-Sight Pro app support for remote camera and NVR access
Remote management through the Milesight Development Platform and DeviceHub
-40 to +70 degrees C, IP30 metal housing, DIN rail, wall or desktop mountSKU: MILESIGHT-UR32S-L0GEU-P - Directional Antennas, QuWireless
QuWireless QuMax AX50M Directional Antenna Enclosure for Teltonika RUTX50
Directional Antennas, QuWirelessQuWireless QuMax AX50M Directional Antenna Enclosure for Teltonika RUTX50
The QuWireless AX50M QuMax (AX50M) is a directional outdoor antenna that houses a Teltonika RUTX50 inside the antenna housing itself. It combines a 4×4 MIMO 5G/LTE panel antenna, a dual-band Wi-Fi antenna and an active GPS antenna in one IP68 enclosure, so the router connects through short internal pigtails instead of long external coax.
Key Features:
• Directional 4×4 MIMO 5G/LTE panel antenna covering 617 MHz to 6.5 GHz
• Peak gain 8 dBi across 1.0 GHz to 3.08 GHz, 6.8 dBi across 3.3 GHz to 5.0 GHz
• Integrated dual-band Wi-Fi antenna and active GPS antenna
• Houses Teltonika RUTX50, RUTM51, RUTM54, RUTM55 or RUTM16 (router sold separately)
• 80 degree horizontal and vertical beamwidth, X-polarisation at plus and minus 45 degrees
• 4 x SMA internal connections on RG316 cable
• VSWR below 2.00 typical, below 3.00 maximum
• IP68 and IP67 certified housing, operating range -40 to +80 degrees C
• Supports LTE band 20, band 28 and band 71 plus 5G NR n77, n78 and n79
• Pole and wall mounting hardware supplied, made in EuropeSKU: QUWIRELESS-AX50M - Robustel, Robustel 4G Antennas, Robustel Accessories
Robustel 1.5m 4G/LTE Cellular Adhesive Antenna (E000330083)
Robustel, Robustel 4G Antennas, Robustel AccessoriesRobustel 1.5m 4G/LTE Cellular Adhesive Antenna (E000330083)
Robustel Low-profile, self adhesive, SMA male antenna covering 824–960 MHz and 1710–2690 MHz cellular bands, with typical gain of 2.9 dBi and a 1.5 m cable. It is suitable for use with Robustel 4G/LTE routers and gateways where an externally mounted adhesive antenna is required for mobile network connectivity.
This antenna is supplied with 1.5m long cable with SMA Male connection.
PN: E000330083
SKU: ROBUSTEL-E000330083-self-adhesive-antenna-4g - 4G Routers With POE PSE, Robustel
Robustel R2120 POE 4G Router, Ethernet and Wifi 5
The Robustel R2120 is an industrial dual-SIM 4G router with four PoE-PSE Ethernet ports. It powers and connects remote IP cameras, sensors and access controls from a single unit, with RCMS cloud management built in.
Key Features:
– Four PoE-PSE ports (802.3af/at), up to 30 W per port
– Dual Mini SIM (2FF) 4G LTE with automatic failover once configured
– 5 x Gigabit Ethernet: 1 x WAN + 4 x LAN, or 5 x LAN
– Dual-band Wi-Fi, 802.11ac 2×2 MIMO, access point or client mode
– RS-485 serial with Modbus RTU to TCP gateway
– 2 x digital input and 2 x digital output, opto-isolated
– RobustOS with C/C++ SDK and full VPN suite
– IPsec, OpenVPN, WireGuard and GRE VPN
– RCMS cloud management with remote PoE device reboot
– Aluminium housing, -20 to +70 degrees C, DIN rail, wall or desktop mountSKU: ROBUSTEL-R2120-4G-POE-ROUTER-A015000004-N
