No products in the basket.
Shop
Showing 16–30 of 385 results
- 5G Routers, Milesight, Milesight 5G Routers, Office 5G Router, Outdoor 5G Router
Milesight UF51-504AE-W4 5G Outdoor CPE with Wi-Fi 6
5G Routers, Milesight, Milesight 5G Routers, Office 5G Router, Outdoor 5G RouterMilesight UF51-504AE-W4 5G Outdoor CPE with Wi-Fi 6
The Milesight UF51-504AE-W4 is a 5G Sub-6 GHz outdoor CPE with Wi-Fi 6, an IP67-rated polycarbonate and cast aluminium enclosure, and built-in GPS, RS485 serial, and galvanically isolated DI/DO. It combines 5G cellular backhaul with dual-band Wi-Fi 6 local connectivity in a single weatherproof outdoor unit, making it the right choice for deployments where both 5G uplink and on-site wireless access are required.
Milesight UF51-504AE-W4 Key Features:
• 5G NR SA/NSA Sub-6 GHz – bands N1/N3/N5/N7/N8/N20/N28/N38/N40/N41/N77/N78
• Downlink up to 4.67 Gbps with 5G dual carrier aggregation (2CC CA)
• Wi-Fi 6 (802.11ax) dual-band – 2.4 GHz (up to 1200 Mbps) and 5 GHz (up to 2400 Mbps), 4 x 4 MIMO
• Quad-core ARM Cortex-A55, 2 GHz / 1 GB LPDDR4x RAM / 1 GB NAND Flash
• 1 x 10/100/1000/2500 Mbps WAN/LAN port + 1 x 10/100/1000 Mbps LAN port
• 802.3at PoE PD on WAN port – single cable power and data
• Built-in GPS/GLONASS/Beidou/Galileo/QZSS with 2 m CEP accuracy
• 1 x RS485 serial port (RS232 hardware optional) with Modbus TCP/RTU support
• 1 x DI + 1 x DO with galvanic isolation
• VPN support: OpenVPN, IPsec, L2TP, PPTP
• Node-RED edge application runtime built in
• IP67 rated – pole, wall, desktop, or bottom screw mounting
• Available without WiFi – see UF51-504AESKU: UF51-504AE-W4 - Milesight, Milesight Accessories
Milesight 48VDC UK Plug Adapter For UR32 POE
Milesight 48V Power Supply for UR32 PoE Routers. UK wall-mount plug, 0.5A, industrial terminal connector, 2kV surge protection.
Required when using the UR32 PoE port to power connected devices.
- Output: 48 VDC, 0.5 A
- Connector: Industrial terminal connector, 5mm pitch
- Cable length: 1.5 m
- Mount type: Wall-mount, UK plug
- Surge protection: 2kV
SKU: Milesight-UR32-48V-PSU-UK - 4G Antennas, 5G Antennas, Panorama 4G Antenna, Panorama Antennas, Vehicle 5G Antennas
Panorama LG-IN2457 5-in-1 MIMO 4G/5G, WiFi and GPS Panel Antenna
4G Antennas, 5G Antennas, Panorama 4G Antenna, Panorama Antennas, Vehicle 5G AntennasPanorama LG-IN2457 5-in-1 MIMO 4G/5G, WiFi and GPS Panel Antenna
The Panorama LG-IN2457 is a 5-in-1 combination antenna supplied as a complete kit with 5-metre cables. It combines 2×2 MIMO 4G/5G LTE, 2×2 MIMO dual-band WiFi, and an active GPS/GNSS receiver in a single low profile dome. As a result, one installation point replaces five separate antennas on a vehicle roof or equipment panel.
Key Features:
• 5-in-1 combination: 2×2 MIMO 4G/5G LTE + 2×2 MIMO dual-band WiFi + active GPS/GNSS
• Cellular: 617-960 MHz and 1710-6000 MHz – all UK and European LTE bands plus sub-6 GHz 5G NR
• WiFi: 2.4 GHz and 4.9-6.0 GHz dual-band
• GPS/GNSS: 1562-1612 MHz – supports GPS, Glonass, Galileo, QZSS and Compass with 26 dB active LNA
• Cellular gain: 5 dBi (617-960 MHz), 9 dBi (1710-3800 MHz), 10 dBi (4900-6000 MHz)
• Complete cable kit: 5x 5-metre RG174 cables – 2x SMA male (cellular), 2x RP-SMA male (WiFi), 1x SMA male (GPS)
• Single hole panel mount – conductive and non-conductive surfaces, no ground plane required
• IP69K waterproof and pressure-wash rated – IK10 vandal resistant
• Halogen-free flame retardant radome and cables – UNECE 118.01 and EN45545-2 compliant
• Operating temperature -40°C to +85°C – available in black (LG-IN2457) or white (LG-IN2457-W)SKU: n/a - 2x2 MiMo 5G Antennas, 4G Antennas, 5G Antennas, Panorama 4G Antenna, Panorama Antennas
Panorama LP-IN2455 2×2 MIMO 4G/5G Low Profile Panel Antenna
2x2 MiMo 5G Antennas, 4G Antennas, 5G Antennas, Panorama 4G Antenna, Panorama AntennasPanorama LP-IN2455 2×2 MIMO 4G/5G Low Profile Panel Antenna
The Panorama LP-IN2455 is a 2×2 MIMO 4G/5G low profile panel antenna, supplied as a complete kit with 5-metre SMA cables for direct connection to a cellular router. It covers 617-960 MHz and 1710-6000 MHz, making it compatible with all UK and European 4G LTE bands plus sub-6 GHz 5G, in a sealed vandal-resistant radome rated IP69K and IK10.
Key Features:
• 2×2 MIMO 4G/5G antenna covering 617-960 MHz and 1710-6000 MHz
• Gain: 5 dBi (617-960 MHz), 9 dBi (1710-3800 MHz), 10 dBi (4900-6000 MHz)
• Complete kit – supplied with 2x 5-metre RG174 SMA male cables
• Panel mount – single hole installation on conductive or non-conductive surfaces
• IP69K waterproof and pressure-wash rated
• IK10 vandal resistant
• Halogen-free flame retardant radome (EN45545-2 compliant)
• Cables compliant with UNECE 118.01 and EN45545-2 flame retardant standards
• Operating temperature -40°C to +85°C
• Available in black (LP-IN2455-B) or white (LP-IN2455-W)SKU: n/a - 5G Antennas, Poynting, Vehicle 5G Antennas
Poynting MIMO-4-19 | 9-in-1 Transportation & Automotive Antenna
5G Antennas, Poynting, Vehicle 5G AntennasPoynting MIMO-4-19 | 9-in-1 Transportation & Automotive Antenna
Poynting MIMO-4-19
9-in-1 Transportation & Automotive Antenna – 617 – 7200 MHz; 4×4 LTE/5G (MIMO), 6dBi; 4×4 Wi-Fi (MIMO), 6.5dBi; GPS/GLONASS, 21dBi
- 9-in-1 High performance multi frequency automotive antenna
- Ultra-wideband coverage from 617 to 6000 MHz for cellular
- 4×4 MIMO LTE/5G, 4×4 MIMO Wi-Fi & GPS/GLONASS
- Robust and weather resistant antenna with an IP69K rating
- Ideal for transportation and marine implementation
- Multi mounting options for ease of installation
SKU: n/a - 4G Antennas, IoT Antennas, QuWireless
QuWireless A240C QuCube for Teltonika RUT2XX
The QuWireless A240C QuCube is an all-in-one outdoor antenna enclosure for the Teltonika RUT200, RUT230, RUT240, RUT241, RUT260, and RUT281. The router mounts inside a compact IP68-sealed housing alongside integrated multi-band 5G/LTE and Wi-Fi 6E omnidirectional antennas, removing external cable runs and delivering a single weatherproof unit for wall or mast installation.
Key Features:
• Integrated multi-band 5G/LTE omni antenna covering 617-960 MHz, 1.7-2.7 GHz, and 3.3-6.0 GHz
• 5G/LTE gain: 2 dBi (617-960 MHz), 3 dBi (1.7-2.7 GHz), 4 dBi (3.3-6.0 GHz)
• Supported 5G NR bands include n77, n78, n79, n28, n1, n3 and many more
• Embedded omnidirectional Wi-Fi 6E antenna covering 2.4 GHz, 5 GHz, and 6 GHz
• VSWR <1.20, max <2.50
• IP68 weatherproof and dustproof rating
• Operating temperature -40 to +80 degrees C
• Compatible with Teltonika RUT200, RUT230, RUT240, RUT241, RUT260, RUT281
• Compact cube form factor – minimal footprint for urban and mobile installations
• Made in EuropeSKU: QuWireless-QuSpot-WI-A240C-N - 4G Antennas, IoT Antennas, QuWireless
QuWireless A240S QuSpot Outdoor Antenna Enclosure for Teltonika RUT241 RUT200 RUT281
4G Antennas, IoT Antennas, QuWirelessQuWireless A240S QuSpot Outdoor Antenna Enclosure for Teltonika RUT241 RUT200 RUT281
The QuWireless A240S QuSpot is an all-in-one outdoor antenna enclosure for the Teltonika RUT200, RUT230, RUT240, RUT241, RUT260, and RUT281. It houses the router inside the sealed unit alongside integrated multi-band LTE and Wi-Fi omnidirectional antennas, eliminating external cable runs and delivering a weather-hardened installation in a single mount.
Key Features:
• Integrated multi-band LTE omni antenna covering 694-960 MHz, 1.7-2.2 GHz, and 2.2-2.7 GHz
• LTE gain: 2 dBi (sub-1 GHz and mid-band), 4 dBi (2.2-2.7 GHz)
• Embedded omnidirectional Wi-Fi antenna (2.4 GHz and 5 GHz)
• Supports LTE bands 1-41 and extended bands including B28, B66, B71
• IP68 weatherproof rating – suitable for permanent outdoor installation
• IK08 impact resistance rating
• Operating temperature -40 to +80 degrees C
• Wall or mast mounting – hardware included
• Compatible with Teltonika RUT200, RUT230, RUT240, RUT241, RUT260, RUT281
• Made in EuropeSKU: QuWireless-QuSpot-WI-A240S-N - 5G Antennas, QuWireless
QuWireless AM30C QuCube Outdoor 5G Antenna Enclosure for Teltonika RUTM30 RUTM20 TRB501
5G Antennas, QuWirelessQuWireless AM30C QuCube Outdoor 5G Antenna Enclosure for Teltonika RUTM30 RUTM20 TRB501
The QuWireless AM30C QuCube is an all-in-one outdoor antenna enclosure for the Teltonika RUTM20, RUTM30, RUTM31, and TRB501. The router mounts inside a compact IP68-sealed housing alongside integrated multi-band 5G/LTE and Wi-Fi 6E omnidirectional antennas, removing external cable runs and delivering a single weatherproof unit for rapid outdoor 5G deployment.
Key Features:
• Integrated multi-band 5G/LTE omni antenna covering 617-960 MHz, 1.7-2.7 GHz, and 3.3-6.0 GHz
• 5G/LTE gain: 2 dBi (617-960 MHz), 3 dBi (1.7-2.7 GHz), 4 dBi (3.3-6.0 GHz)
• Supports 5G NR bands n77, n78, n79, n28, n1, n3, n20 and the full LTE band set
• Embedded omnidirectional Wi-Fi 6E antenna covering 2.4 GHz, 5 GHz, and 6 GHz
• VSWR <1.20, max <2.50
• IP68 weatherproof rating
• Operating temperature -40 to +80 degrees C
• Compatible with Teltonika RUTM20, RUTM30, RUTM31, TRB501
• Compact cube form factor for urban and mobile 5G installations
• Made in EuropeSKU: QuWireless-QuSpot-WI-AM30C-N - QuWireless
QuWireless AX50S QuSpot Outdoor 5G Enclosure for Teltonika RUTX50
The QuWireless AX50S QuSpot is an IP68-rated outdoor enclosure for the Teltonika RUTX50, RUTM51, RUTM54, and RUTM55, with integrated 5G/LTE, dual-band Wi-Fi, and GPS antennas in a single weatherproof unit. It mounts the router directly inside the antenna housing, eliminating coaxial cable runs between modem and antenna and maximising signal performance in permanent outdoor installations.
Key Features:
• Compatible with Teltonika RUTX50, RUTM51, RUTM54, and RUTM55 (router sold separately)
• Integrated 5G/LTE omnidirectional antenna: 617 MHz to 6 GHz, up to 4.5 dBi gain
• 4x SMA internal connections for 4×4 MIMO 5G/LTE
• Integrated dual-band Wi-Fi omni antenna: 2.4 GHz and 5 GHz
• Integrated GPS active antenna
• IP68 and IK08 rated – suitable for permanent outdoor and marine installation
• Passive PoE support for single-cable power and data
• Operating temperature: -40 to +80°C
• Pole and wall mount hardware included
• Made in EuropeSKU: QuWireless-QuSpot-WI-AX50S-N - 4G Routers, Robustel, Robustel 4G Routers
Robustel R1511e
The Robustel R1511e is a compact industrial 4G LTE router with a fully embedded MFF2 eSIM, covering global LTE bands across 4G, 3G, and 2G networks. It connects Ethernet and RS-232 or RS-485 serial equipment over cellular, with automatic failover, built-in Modbus RTU to TCP conversion, and full remote management via the RCMS cloud platform.
Key Features:
• Global 4G LTE Cat 4 via embedded MFF2 eSIM – LTE FDD B1/2/3/4/5/7/8/12/13/18/19/20/25/26/28/66, LTE TDD B38/39/40/41
• GSMA SGP.22 compliant – up to 6 eSIM profiles with remote provisioning and switching
• 2 x 10/100 Mbps Ethernet – configurable as dual LAN or 1x LAN + 1x WAN
• 1 x RS-232 or RS-485 serial port (hardware configured) with built-in Modbus RTU to TCP gateway
• 2.4 GHz Wi-Fi 802.11 b/g/n – AP and client modes
• IPsec, OpenVPN, GRE, and WireGuard VPN tunnels
• RobustVPN provides a fixed IP address on any eSIM profile
• Automatic failover across 4G, Ethernet, and Wi-Fi
• RCMS cloud platform for remote device monitoring and eSIM profile management
• DIN rail, wall, and desktop mounting – operating range -25 to +70°CSKU: n/a - 4G Routers, Teltonika, Teltonika 4G Routers
Teltonika RUT200 4G LTE Industrial Cellular Router
The Teltonika RUT200 (RUT200013000) is a compact 4G LTE Cat 4 industrial cellular router with a single Mini SIM, 802.11b/g/n Wi-Fi, and two 10/100 Mbps Ethernet ports in a 125 g aluminium housing. It runs RutOS on a Mediatek 580 MHz processor with a full VPN stack, industrial protocol support, digital I/O, and Teltonika RMS compatibility, operating from -40 to +75 °C.
Key Features:
• 4G LTE Cat 4 – 150 Mbps down / 50 Mbps up; automatic fallback to 3G and 2G
• Single Mini SIM (2FF) with auto APN, band lock, and operator block/allow list
• Wi-Fi 4 (802.11b/g/n) – access point and station modes, up to 50 simultaneous clients
• 1 x WAN + 1 x LAN (10/100 Mbps); WAN port configurable as second LAN via RutOS
• 1 x digital input and 1 x digital output on 4-pin power connector
• Passive PoE input via LAN1 – Mode B, 9-30 V DC (not compatible with 802.3af/at/bt)
• VPN: OpenVPN, IPsec, WireGuard, ZeroTier, GRE, L2TP, DMVPN, SSTP, Tinc
• Modbus TCP, OPC UA, DNP3, MQTT broker/publisher, Azure IoT Hub, AWS IoT Core
• Teltonika RMS compatible – remote management, FOTA, alerts, and VPN tunnels
• CE, UKCA, E-mark certified; IP30; 83 x 25 x 74 mm; 125 gSKU: TELTONIKA-RUT200-N - Teltonika, Teltonika 4G Routers
Teltonika RUT901 Industrial 4G LTE Dual SIM Router
The Teltonika RUT901 (RUT901000600) is a compact industrial 4G LTE Cat 4 dual SIM router with four Ethernet ports and RutOS. Successor to the RUT950 and RUT951, it adds dual SIM failover and a full industrial protocol stack in an aluminium DIN-rail enclosure.
Key Features:
• Dual SIM (2x Mini SIM 2FF) with automatic failover – weak signal, data limit, roaming, network denied
• 4G LTE Cat 4 – 150 Mbps download / 50 Mbps upload
• 4x Ethernet (1x WAN, 3x LAN), 10/100 Mbps with auto MDI/MDIX
• Wi-Fi 4 (802.11b/g/n, 2.4 GHz) – up to 100 simultaneous clients, 2x RP-SMA
• 1x Digital Input, 1x Digital Output on 4-pin power connector
• Passive PoE input on LAN1 (Mode B, 9-30 V DC) – not IEEE 802.3af/at compatible
• VPN: OpenVPN, IPsec, WireGuard, ZeroTier, GRE, PPTP, L2TP, Stunnel, DMVPN, SSTP, Tinc
• Modbus TCP, DNP3, MQTT, Data to Server industrial protocol support
• Teltonika RMS remote management and FOTA firmware update
• Operating temperature -40 to +75 °C, IP30, DIN rail or wall mount (kit sold separately)SKU: TELTONIKA-RUT901-N - 4G CCTV, 4G Routers, Teltonika, Teltonika 4G Routers
Teltonika RUT906 4G LTE Industrial Router
The Teltonika RUT906 (RUT906000200) is a 4G LTE Cat 4 industrial router with RS232, RS485, GNSS, and dual SIM. RS232 and RS485 connect legacy serial equipment directly, with GPS, Modbus RTU, BACnet, DNP3, and DLMS all built in.
Key Features:
• Dual SIM (2x Mini SIM 2FF) with auto-failover – weak signal, data limit, roaming, network denied
• 4G LTE Cat 4 – 150 Mbps download / 50 Mbps upload
• RS232 (DB9, RTS/CTS flow control, 300-115200 baud) and RS485 (full and half-duplex, 300-230400 baud)
• GNSS – GPS with NMEA 0183, NTRIP, geofencing, and AVL server support
• 4x Ethernet (1x WAN, 3x LAN), 10/100 Mbps with auto MDI/MDIX
• Wi-Fi 4 (802.11b/g/n, 2.4 GHz) – up to 100 simultaneous clients, 2x RP-SMA
• Analog input (0-24 V / 4-20 mA), isolated digital input, dry contact input, relay output, open collector outputs
• Modbus RTU/TCP, BACnet (RS485/TCP), DNP3, OPC UA, DLMS/COSEM, MQTT industrial protocols
• VPN: OpenVPN, IPsec, WireGuard, ZeroTier, DMVPN, SSTP, L2TP, Stunnel, Tinc, GRE, PPTP
• Operating temperature -40 to +75 °C, IP30, aluminium housing, DIN rail or wall mount (kit sold separately)SKU: TELTONIKA-RUT906-N - 4G Routers, Teltonika, Teltonika 4G Routers
Teltonika RUT241 Compact 4G Router
Teltonika RUT241 Compact 4G Router for remote access and monitoring applications that need a single SIM LTE 4G router with Ethernet and WiFi. This compact, industrial 4G router provides an entry level solution and is ideal for use with a Fixed IP SIM to provide convenient 4G Internet.
SKU: TELTONIKA-RUT241-N - 4G CCTV, Teltonika, Teltonika 4G Routers
Teltonika RUT951 Industrial 4G Router
Teltonika RUT951 4G LTE Industrial Router
- This device features dual SIM 4G cellular connectivity combined with Wi-Fi and 4 Ethernet interfaces to meet the needs of the most varied IoT solutions.
- Automatic WAN failover to an available backup connection ensures network continuity and eliminates downtime.
- Powered by RutOS that offers customization options for professional use, automation features, and top-level security for your solution.
- Compatible with the Teltonika Networks Remote Management System (Teltonika RMS) enables secure remote management to save time and expenses.
- Standard Teltonika order code: RUT951030200
CHECK OUT THE NEW RUT901 – CLICK HERE
SKU: TELTONIKA-RUT951-ESIM-N
