No products in the basket.
GNSS router
Showing all 12 results
- IoT 4G Gateway, Milesight, Milesight 4G Routers
Milesight UR41 4G Cat 4 Mini Industrial Router with GPS
IoT 4G Gateway, Milesight, Milesight 4G RoutersMilesight UR41 4G Cat 4 Mini Industrial Router with GPS
The Milesight UR41 (UR41-L08EU) is a compact 4G LTE Cat 4 industrial router built for embedded IoT deployments where space, power budget, and serial device connectivity all matter. At 70 x 55 x 22 mm and 103 g, it combines RS232/RS485, digital I/O, GPS/GNSS, and a hardware watchdog in a metal IP30 enclosure rated to -40 to +60 °C.
Key Features:
• 4G LTE Cat 4 – up to 150 Mbps down / 50 Mbps up, with 3G/2G fallback
• GPS/GNSS – GPS, GLONASS, BeiDou, Galileo, QZSS, 2.5 m CEP accuracy
• RS232 or RS485 (software switchable) – Modbus RTU/TCP, transparent serial, DLMS client
• 1 x digital input + 1 x digital output, galvanically isolated, 3.5 mm terminal block
• Dual power input: 5-24 V DC terminal block or 5 V USB Type-C
• Power-saving standby and idle modes – 6.3 mA standby at 12 V
• Hardware watchdog for automatic recovery from cellular or system failures
• VPN support: IPsec, OpenVPN, WireGuard, GRE, L2TP, PPTP, DMVPN, ZeroTier
• Remote management via Milesight Development Platform and MilesightVPN
• Desk, wall, and DIN rail mounting – 70 x 55 x 22 mm, 103 gSKU: UR41-L08EU - 4G Routers, Teltonika, Teltonika 4G Routers
Teltonika RUT204 CAN BUS LTE Router
The Teltonika RUT204 is a compact 4G LTE Cat 4 router with a native CAN Bus interface, built for vehicle telematics, industrial machine monitoring, and mobile IoT deployments. It combines dual SIM failover, integrated GNSS, RS232 serial, active PoE input, and a wide 9-57 VDC power range in an anodised aluminium enclosure rated to -40 to +75°C.
Key Features:
• 4G LTE Cat 4 – 150 Mbps download / 50 Mbps upload with 3G and 2G fallback
• Native CAN Bus interface via 6-pin terminal block – CAN frame forwarding over IP; CANopen and J1939 client support on firmware roadmap
• Dual internal SIM slots (Mini SIM 2FF, double stacked tray) with automatic failover
• GNSS: GPS, GLONASS, BeiDou, Galileo and QZSS with geofencing and NMEA 0183
• RS232 serial interface (TX/RX) on 6-pin terminal block
• Active PoE input 802.3af Class 0 on LAN port; passive PoE input 16-57 VDC
• Wide-range 9-57 VDC DC power input with reverse polarity and surge protection
• Internal Micro SD slot up to 2 TB for local data logging
• Wi-Fi 4 (802.11b/g/n) – access point and station modes, up to 50 clients
• RutOS with OpenVPN, WireGuard, IPsec, Modbus, MQTT, DNP3 and RMS supportSKU: TELTONIKA-RUT204-N - 5G Routers, Milesight, Milesight 5G Routers
Milesight UR75 Industrial 5G Router with Wi-Fi 6 and GPS
The Milesight UR75-504AE-W2 is an industrial-grade 5G router from the Ultra Series, built for M2M and IoT deployments where high throughput, serial connectivity, and environmental resilience are all required. It pairs a quad-core ARM Cortex-A55 processor with global 5G Sub-6 GHz support, dual SIM failover, Wi-Fi 6, integrated multi-constellation GNSS, and RS232/RS485 serial ports in a compact IP30 metal enclosure rated to -40°C.
UR75-504AE-W2 Key Features:
• 5G Sub-6 GHz NSA/SA with dual carrier aggregation – up to 4.67 Gbps download
• 4G LTE and WCDMA fallback with automatic dual SIM failover
• Dual Mini SIM-2FF slots (1.8V/3V)
• Quad-core ARM Cortex-A55 2 GHz CPU, 1 GB LPDDR4x RAM, 1 GB NAND Flash
• Wi-Fi 6 dual-band: 2.4 GHz 600 Mbps + 5 GHz 1200 Mbps (2×2 MIMO per band)
• 5 x Gigabit Ethernet: 1 x WAN + 4 x LAN
• RS232 + RS485 serial ports with Modbus TCP/RTU gateway support
• GPS/GLONASS/BDS/Galileo/QZSS positioning (2m CEP accuracy)
• 1 x DI + 1 x DO (galvanic isolation) and M.2 NVMe SSD expansion slot
• Node-RED, Milesight DeviceHub remote management, MilesightVPN
• -40°C to +70°C operating range, IP30 metal housing, DIN rail mountable
• 3-year manufacturer warrantyIf you need a 5G Router with POE then please view the Milesight UR75-504AE-P-W2
SKU: UR75-504AE-W2 - 5G Routers, Milesight, Milesight 5G Routers
Milesight UR75 Industrial 5G PoE Router with Wi-Fi 6 and GPS (POE Version UR75-504AE-P-W2)
5G Routers, Milesight, Milesight 5G RoutersMilesight UR75 Industrial 5G PoE Router with Wi-Fi 6 and GPS (POE Version UR75-504AE-P-W2)
The Milesight UR75-504AE-P-W2 is an industrial 5G router from the Ultra Series with 4-port 802.3 af/at PoE PSE, built for deployments where the router must also power IP cameras, wireless access points, or other PoE-compatible devices over the LAN ports. It combines 5G Sub-6 GHz connectivity, quad-core processing, Wi-Fi 6, integrated GPS, and RS232/RS485 serial ports in a compact IP30 metal enclosure rated to -40°C. A 48V DC power adapter is included.
UR75-504AE-P-W2 Key Features:
• 5G Sub-6 GHz NSA/SA with dual carrier aggregation – up to 4.67 Gbps download
• 4G LTE and WCDMA fallback with automatic dual SIM failover
• Dual Mini SIM-2FF slots (1.8V/3V)
• Quad-core ARM Cortex-A55 2 GHz CPU, 1 GB LPDDR4x RAM, 1 GB NAND Flash
• Wi-Fi 6 dual-band: 2.4 GHz 600 Mbps + 5 GHz 1200 Mbps (2×2 MIMO per band)
• 5 x Gigabit Ethernet: 1 x WAN + 4 x LAN with 802.3 af/at PoE PSE (30W per port, 60W total)
• RS232 + RS485 serial ports with Modbus TCP/RTU gateway support
• GPS/GLONASS/BDS/Galileo/QZSS positioning (2m CEP accuracy)
• 1 x DI + 1 x DO (galvanic isolation) and M.2 NVMe SSD expansion slot
• Node-RED, Milesight DeviceHub remote management, MilesightVPN
• -40°C to +70°C operating range, IP30 metal housing, DIN rail mountable
• 48V power adapter included, 3-year manufacturer warrantyIf you do not require POE then please view the Milesight UR75-504AE-W2
SKU: UR75-504AE-P-W2 - 5G Routers, Milesight, Milesight 5G Routers, Office 5G Router, Outdoor 5G Router
Milesight UF51-504AE-W4 5G Outdoor CPE with Wi-Fi 6
5G Routers, Milesight, Milesight 5G Routers, Office 5G Router, Outdoor 5G RouterMilesight UF51-504AE-W4 5G Outdoor CPE with Wi-Fi 6
The Milesight UF51-504AE-W4 is a 5G Sub-6 GHz outdoor CPE with Wi-Fi 6, an IP67-rated polycarbonate and cast aluminium enclosure, and built-in GPS, RS485 serial, and galvanically isolated DI/DO. It combines 5G cellular backhaul with dual-band Wi-Fi 6 local connectivity in a single weatherproof outdoor unit, making it the right choice for deployments where both 5G uplink and on-site wireless access are required.
Milesight UF51-504AE-W4 Key Features:
• 5G NR SA/NSA Sub-6 GHz – bands N1/N3/N5/N7/N8/N20/N28/N38/N40/N41/N77/N78
• Downlink up to 4.67 Gbps with 5G dual carrier aggregation (2CC CA)
• Wi-Fi 6 (802.11ax) dual-band – 2.4 GHz (up to 1200 Mbps) and 5 GHz (up to 2400 Mbps), 4 x 4 MIMO
• Quad-core ARM Cortex-A55, 2 GHz / 1 GB LPDDR4x RAM / 1 GB NAND Flash
• 1 x 10/100/1000/2500 Mbps WAN/LAN port + 1 x 10/100/1000 Mbps LAN port
• 802.3at PoE PD on WAN port – single cable power and data
• Built-in GPS/GLONASS/Beidou/Galileo/QZSS with 2 m CEP accuracy
• 1 x RS485 serial port (RS232 hardware optional) with Modbus TCP/RTU support
• 1 x DI + 1 x DO with galvanic isolation
• VPN support: OpenVPN, IPsec, L2TP, PPTP
• Node-RED edge application runtime built in
• IP67 rated – pole, wall, desktop, or bottom screw mounting
• Available without WiFi – see UF51-504AESKU: UF51-504AE-W4 - 4G CCTV, 4G Routers, Teltonika, Teltonika 4G Routers
Teltonika RUT906 4G LTE Industrial Router
The Teltonika RUT906 (RUT906000200) is a 4G LTE Cat 4 industrial router with RS232, RS485, GNSS, and dual SIM. RS232 and RS485 connect legacy serial equipment directly, with GPS, Modbus RTU, BACnet, DNP3, and DLMS all built in.
Key Features:
• Dual SIM (2x Mini SIM 2FF) with auto-failover – weak signal, data limit, roaming, network denied
• 4G LTE Cat 4 – 150 Mbps download / 50 Mbps upload
• RS232 (DB9, RTS/CTS flow control, 300-115200 baud) and RS485 (full and half-duplex, 300-230400 baud)
• GNSS – GPS with NMEA 0183, NTRIP, geofencing, and AVL server support
• 4x Ethernet (1x WAN, 3x LAN), 10/100 Mbps with auto MDI/MDIX
• Wi-Fi 4 (802.11b/g/n, 2.4 GHz) – up to 100 simultaneous clients, 2x RP-SMA
• Analog input (0-24 V / 4-20 mA), isolated digital input, dry contact input, relay output, open collector outputs
• Modbus RTU/TCP, BACnet (RS485/TCP), DNP3, OPC UA, DLMS/COSEM, MQTT industrial protocols
• VPN: OpenVPN, IPsec, WireGuard, ZeroTier, DMVPN, SSTP, L2TP, Stunnel, Tinc, GRE, PPTP
• Operating temperature -40 to +75 °C, IP30, aluminium housing, DIN rail or wall mount (kit sold separately)SKU: TELTONIKA-RUT906-N - 4G Routers, Teltonika, Teltonika 4G Routers
Teltonika RUT986 Global 4G Router
The Teltonika RUT986 is a global 4G LTE Cat 4 industrial router with RS232, RS485, GNSS, comprehensive I/O, and Micro SD storage, built for SCADA, energy, utilities, and industrial IoT deployments requiring serial connectivity alongside cellular. Powered by a Telit modem covering 18 LTE bands worldwide, it replaces regional hardware variants with a single globally-certified unit.
Key Features:
• Global 4G LTE Cat 4 via Telit modem – 150 Mbps down / 50 Mbps up, 3G/2G fallback
• 18 LTE bands: B1, B2, B3, B4, B5, B7, B8, B9, B12, B13, B14, B18, B19, B20, B25, B26, B28
• Dual physical SIM (Mini SIM 2FF) plus eSIM with Bootstrap provisioning (up to 7 eSIM profiles)
• RS232 (DB9) and RS485 full/half duplex serial ports, 300-115200 baud
• GNSS receiver: GPS, GLONASS, BeiDou, Galileo, QZSS – geofencing, NMEA, NTRIP client
• 4 digital/analog inputs and 3 outputs including SPST relay (40V, 4A) and analog 4-20 mA input
• 1x USB-A port, Micro SD slot (up to 2 TB) for local data logging
• Industrial protocols: Modbus, DNP3, OPC UA, BACnet, DLMS/COSEM
• 4x RJ45 (1x WAN, 3x LAN), 10/100 Mbps, passive PoE input via LAN1
• RutOS with VPN suite (OpenVPN, WireGuard, IPsec), VRF, RMS remote management
• -40 to +65 degrees C, IP30, aluminium enclosure, 110 x 50 x 100 mm, 294 gSKU: TELTONIKA-RUT986-N - 5G Routers, eSIM 5G Routers, Teltonika, Teltonika 5G Routers
Teltonika RUTX50 eSIM 5G Router
The Teltonika RUTX50 (RUTX50320100) is an industrial 5G router with integrated eSIM, dual Mini-SIM slots, and 5G NR Sub-6GHz connectivity delivering up to 3.3 Gbps download. Built for demanding IoT, infrastructure and industrial deployments, it combines a full Gigabit Ethernet switch, dual-band Wi-Fi 5, GNSS, digital I/O, and the complete RutOS feature set in a ruggedised aluminium enclosure.
Key Features:
• 5G NR Sub-6GHz SA/NSA — up to 3.3 Gbps DL / 900 Mbps UL (4×4 MIMO)
• LTE Cat 20 fallback — up to 2.0 Gbps DL / 200 Mbps UL
• Integrated eSIM (eUICC) with up to 7 profiles plus 2 x Mini-SIM slots
• 1 x Gigabit WAN + 4 x Gigabit LAN ports
• Dual-band Wi-Fi 5 (802.11ac Wave 2) — up to 867 Mbps, up to 150 clients
• GNSS: GPS, GLONASS, BeiDou, Galileo, QZSS
• Digital input and digital output on 4-pin industrial power connector
• 9–50 V DC wide-range input, passive PoE via LAN1 (Mode B)
• Full VPN suite: OpenVPN, IPsec, WireGuard, ZeroTier, DMVPN, Tailscale
• RutOS with Modbus TCP, OPC UA, DNP3, DLMS/COSEM, MQTT
• Teltonika RMS compatible — remote management, FOTA, RMS Connect
• Operating temperature: -40 to +75 °C, IP30, DIN rail / wall mount
• UK plug PSU included, CE/UKCA/E-mark certifiedSKU: TELTONIKA-RUTX50-ESIM-N - 5G Routers, Office 5G Router, Office 5G Router, Teltonika, Teltonika 5G Routers
Teltonika RUTC50 5G Industrial Router with Docker and Wi-Fi 6
5G Routers, Office 5G Router, Office 5G Router, Teltonika, Teltonika 5G RoutersTeltonika RUTC50 5G Industrial Router with Docker and Wi-Fi 6
The Teltonika RUTC50 is an industrial 5G router with Docker support, delivering Sub-6 GHz 5G at up to 3.4 Gbps alongside dual-band Wi-Fi 6, five Gigabit Ethernet ports, and built-in GNSS. It runs on a dual-core ARM Cortex-A53 processor under RutOS and supports eSIM plus dual physical SIM with automatic failover, making it the most capable router in the RUTC edge computing series.
Key Features:
• 5G Sub-6 GHz SA/NSA up to 3.4 Gbps download (4×4 MIMO) / 900 Mbps upload
• Backward compatible with 4G LTE Cat 20 and 3G
• Dual Nano SIM with auto-failover + eSIM support (order code dependent)
• Dual-band Wi-Fi 6 (802.11ax) up to 2,402 Mbps on 5 GHz – supports up to 512 clients
• 5x Gigabit Ethernet (1x WAN, 4x LAN)
• Docker container support for edge application deployment
• Built-in GNSS: GPS, GLONASS, BeiDou, Galileo, QZSS
• Digital input and digital output on 4-pin power connector
• DIN rail, wall mount, and flat surface mounting supported
• RutOS with full VPN suite, Modbus TCP, MQTT, OPC UA and Teltonika RMSSKU: TELTONIKA-RUTC50-ESIM-N - 5G Routers, Robustel, Robustel 5G Routers
Robustel R5030 Industrial 5G Router with WiFi6
The Robustel R5030 is a powerful industrial 5G router with dual-band Wi-Fi 6, five Gigabit Ethernet ports, GNSS positioning, and dual-SIM failover. Built for enterprise networks, transport, and IoT, it delivers high-speed 5G connectivity with flexible wired and wireless access in one rugged device.
Key Features
- 5G NR (Release-15/16) with LTE/3G fallback for global connectivity
- Dual-SIM (Mini-SIM 2FF) with automatic failover and Smart Roaming
- Dual-band Wi-Fi 6 (802.11ax, 2×2 MIMO) supporting AP and Client modes
- 5 × Gigabit Ethernet ports (configurable WAN/LAN) with PoE-PD on ETH0
- GNSS interface supporting GPS, Galileo, GLONASS, QZSS, and BDS
- Digital I/O (1 × DI, 1 × DO) for sensors, alarms, and automation
- RobustOS with RCMS cloud management for OTA updates and monitoring
- VPN & security suite: IPsec, OpenVPN, WireGuard, GRE, DMVPN
- Rugged IP30 metal housing with DIN-rail/wall mount, –25…+70 °C operation
SKU: R5030 - 5G Routers, 5G Routers For Vehicles, Teltonika, Teltonika 5G Routers, Transport 5G Router
Teltonika ATRM50 5G Router for Transportation
5G Routers, 5G Routers For Vehicles, Teltonika, Teltonika 5G Routers, Transport 5G RouterTeltonika ATRM50 5G Router for Transportation
The Teltonika ATRM50 is a rugged 5G router designed for high-speed mobile connectivity in transportation, logistics, public transit, emergency services, and industrial fleets. Featuring eSIM support, GNSS, Wi-Fi, serial communication, dual SIM with failover, and a wide operating voltage range, the ATRM50 is your ultimate solution for reliable, high-performance mobile internet on the move.
- 5G NR (NSA/SA) and LTE Cat 20 mobile connectivity
- Dual SIM with auto-failover and eSIM support
- Integrated GNSS (GPS, GLONASS, Galileo, BeiDou)
- Dual-band Wi-Fi 5 (802.11ac) – Access Point & Client
- RS232/RS485 serial ports with MODBUS support
- Digital I/O, CAN support, and USB for extended I/O
- Wide 9–50 VDC power input for vehicle compatibility
- Compact, rugged design for transport environments
- Remote management via Teltonika RMS
- CE, E-mark, UKCA, FCC, PTCRB, and other certifications
SKU: TELTONIKA-ATRM50-N - 4G Routers, CAT6 4G Router, Teltonika, Teltonika 4G Routers
Teltonika RUTX12 Dual LTE Cat 6 Industrial Cellular Router
4G Routers, CAT6 4G Router, Teltonika, Teltonika 4G RoutersTeltonika RUTX12 Dual LTE Cat 6 Industrial Cellular Router
The Teltonika RUTX12 is a powerful dual LTE Cat 6 industrial router designed for mission-critical applications. It offers uninterrupted connectivity with dual LTE modems, providing speeds up to 600 Mbps with load balancing. The robust router features advanced security, remote management, and a durable aluminum housing suitable for harsh environments.Top 6 Key Features:
- Dual LTE Cat 6 Modems for simultaneous high-speed internet up to 600 Mbps
- enables load balancing, hot swap failover or bonded 4G using Bondix service.
- 5 Gigabit Ethernet ports for wired connections up to 1000 Mbps
- Wave-2 802.11ac Dual Band WiFi with speeds up to 867 Mbps
- Advanced security features like VPN, IPsec, PPTP, L2TP, and GNSS tracking
- Remote Management System (RMS) for seamless monitoring and configuration
- Robust aluminium housing with IP30 rating for harsh industrial environments
SKU: TELTONIKA-RUTX12-N - Dual LTE Cat 6 Modems for simultaneous high-speed internet up to 600 Mbps
