WireGuard
Showing all 8 results
- IoT 4G Gateway, Milesight, Milesight 4G Routers
Milesight UR41 4G Cat 4 Mini Industrial Router with GPS
IoT 4G Gateway, Milesight, Milesight 4G RoutersMilesight UR41 4G Cat 4 Mini Industrial Router with GPS
The Milesight UR41 (UR41-L08EU) is a compact 4G LTE Cat 4 industrial router built for embedded IoT deployments where space, power budget, and serial device connectivity all matter. At 70 x 55 x 22 mm and 103 g, it combines RS232/RS485, digital I/O, GPS/GNSS, and a hardware watchdog in a metal IP30 enclosure rated to -40 to +60 °C.
Key Features:
• 4G LTE Cat 4 – up to 150 Mbps down / 50 Mbps up, with 3G/2G fallback
• GPS/GNSS – GPS, GLONASS, BeiDou, Galileo, QZSS, 2.5 m CEP accuracy
• RS232 or RS485 (software switchable) – Modbus RTU/TCP, transparent serial, DLMS client
• 1 x digital input + 1 x digital output, galvanically isolated, 3.5 mm terminal block
• Dual power input: 5-24 V DC terminal block or 5 V USB Type-C
• Power-saving standby and idle modes – 6.3 mA standby at 12 V
• Hardware watchdog for automatic recovery from cellular or system failures
• VPN support: IPsec, OpenVPN, WireGuard, GRE, L2TP, PPTP, DMVPN, ZeroTier
• Remote management via Milesight Development Platform and MilesightVPN
• Desk, wall, and DIN rail mounting – 70 x 55 x 22 mm, 103 gSKU: UR41-L08EU - Milesight, Milesight 4G Routers
Milesight UR41L 4G Cat 1 Mini Industrial Router
The Milesight UR41L (UR41L-L0CEU) is a compact 4G LTE Cat 1 industrial router built for cost-sensitive M2M and IoT deployments where low power consumption and serial device connectivity matter more than peak throughput. At 70 x 55 x 22 mm and 103 g, it combines RS232/RS485, galvanically isolated digital I/O, and a hardware watchdog in a metal IP30 enclosure rated to -40 to +60 °C.
Key Features:
• 4G LTE Cat 1 connectivity for low-throughput M2M and IoT applications
• RS232 or RS485 (software switchable) – Modbus RTU/TCP, transparent serial, DLMS client
• 1 x digital input + 1 x digital output, galvanically isolated, 3.5 mm terminal block
• Dual power input: 5-24 V DC terminal block or 5 V USB Type-C
• Ultra-low standby power: 6.3 mA at 12 V – suitable for battery and solar-powered installs
• Hardware watchdog for automatic recovery from cellular or system failures
• VPN support: IPsec, OpenVPN, WireGuard, GRE, L2TP, PPTP, DMVPN, ZeroTier
• Remote management via Milesight DeviceHub and MilesightVPN
• Scheduled wake, SMS wake, and DI wake for power-managed deployments
• Desk, wall, and DIN rail mounting – 70 x 55 x 22 mm, 103 gSKU: UR41L-L0CEU - 4G Routers, Teltonika, Teltonika 4G Routers, Teltonika eSIM Routers
Teltonika RUT200 Industrial 4G Router with eSIM
4G Routers, Teltonika, Teltonika 4G Routers, Teltonika eSIM RoutersTeltonika RUT200 Industrial 4G Router with eSIM
Teltonika RUT200 (RUT200343000 is the ) is a compact industrial 4G Cat 4 Router with integrated eSIM, supplied with a UK PSU and modem designed for UK and European mobile network connectivity. The built-in eSIM runs alongside a physical Mini SIM (2FF) slot, with configurable switching between them on signal loss, data limit, roaming or network failure – no site visit required to change network.
Key Features:
• 4G LTE Cat 4 – 150 Mbps download / 50 Mbps upload
• Integrated eSIM with up to 7 stored profiles plus 1 x Mini SIM (2FF) physical slot
• Automatic SIM/eSIM failover – triggers on weak signal, data limit, roaming, no network or connection failure
• LTE FDD bands B1, B3, B5, B7, B8, B20, B28 – covers all major UK 4G frequencies
• 802.11b/g/n Wi-Fi access point and station modes, up to 50 simultaneous clients
• 1 x WAN and 1 x LAN, 10/100 Mbps Ethernet (WAN configurable as LAN in RutOS)
• Digital input and digital output on 4-pin industrial power connector
• Passive PoE input on LAN1, 9-30 V DC, Mode B – not compatible with 802.3af/at injectors or switches
• -40 to +75 °C operating temperature, IP30, aluminium enclosure, 125 g
• RutOS with OpenVPN, WireGuard, IPsec, Modbus TCP, MQTT, DNP3 and Teltonika RMSSKU: TELTONIKA-RUT200-ESIM-N - 4G Routers, Teltonika, Teltonika 4G Routers
Teltonika RUT204 CAN BUS LTE Router
The Teltonika RUT204 is a compact 4G LTE Cat 4 router with a native CAN Bus interface, built for vehicle telematics, industrial machine monitoring, and mobile IoT deployments. It combines dual SIM failover, integrated GNSS, RS232 serial, active PoE input, and a wide 9-57 VDC power range in an anodised aluminium enclosure rated to -40 to +75°C.
Key Features:
• 4G LTE Cat 4 – 150 Mbps download / 50 Mbps upload with 3G and 2G fallback
• Native CAN Bus interface via 6-pin terminal block – CAN frame forwarding over IP; CANopen and J1939 client support on firmware roadmap
• Dual internal SIM slots (Mini SIM 2FF, double stacked tray) with automatic failover
• GNSS: GPS, GLONASS, BeiDou, Galileo and QZSS with geofencing and NMEA 0183
• RS232 serial interface (TX/RX) on 6-pin terminal block
• Active PoE input 802.3af Class 0 on LAN port; passive PoE input 16-57 VDC
• Wide-range 9-57 VDC DC power input with reverse polarity and surge protection
• Internal Micro SD slot up to 2 TB for local data logging
• Wi-Fi 4 (802.11b/g/n) – access point and station modes, up to 50 clients
• RutOS with OpenVPN, WireGuard, IPsec, Modbus, MQTT, DNP3 and RMS supportSKU: TELTONIKA-RUT204-N - 4G Routers, Teltonika, Teltonika 4G Routers
Teltonika RUT200 4G LTE Industrial Cellular Router
The Teltonika RUT200 (RUT200013000) is a compact 4G LTE Cat 4 industrial cellular router with a single Mini SIM, 802.11b/g/n Wi-Fi, and two 10/100 Mbps Ethernet ports in a 125 g aluminium housing. It runs RutOS on a Mediatek 580 MHz processor with a full VPN stack, industrial protocol support, digital I/O, and Teltonika RMS compatibility, operating from -40 to +75 °C.
Key Features:
• 4G LTE Cat 4 – 150 Mbps down / 50 Mbps up; automatic fallback to 3G and 2G
• Single Mini SIM (2FF) with auto APN, band lock, and operator block/allow list
• Wi-Fi 4 (802.11b/g/n) – access point and station modes, up to 50 simultaneous clients
• 1 x WAN + 1 x LAN (10/100 Mbps); WAN port configurable as second LAN via RutOS
• 1 x digital input and 1 x digital output on 4-pin power connector
• Passive PoE input via LAN1 – Mode B, 9-30 V DC (not compatible with 802.3af/at/bt)
• VPN: OpenVPN, IPsec, WireGuard, ZeroTier, GRE, L2TP, DMVPN, SSTP, Tinc
• Modbus TCP, OPC UA, DNP3, MQTT broker/publisher, Azure IoT Hub, AWS IoT Core
• Teltonika RMS compatible – remote management, FOTA, alerts, and VPN tunnels
• CE, UKCA, E-mark certified; IP30; 83 x 25 x 74 mm; 125 gSKU: TELTONIKA-RUT200-N - 5G Routers, Teltonika, Teltonika 5G Routers, Teltonika eSIM Routers
Teltonika RUTM30 Compact 5G Router
5G Routers, Teltonika, Teltonika 5G Routers, Teltonika eSIM RoutersTeltonika RUTM30 Compact 5G Router
The Teltonika RUTM30 (RUTM30000200) is a compact 5G Sub-6 GHz industrial router with dual Mini SIM and consumer eSIM support, delivering up to 3.4 Gbps download on 5G and 1.6 Gbps on 4G LTE Cat 19 fallback. Running RutOS on a dual-core MediaTek 880 MHz CPU with 256 MB RAM, it combines a full VPN suite, industrial protocol support, and Teltonika RMS compatibility in a 319 g anodised aluminium enclosure.
Key Features:
• 5G Sub-6 GHz SA/NSA: up to 3.4 Gbps DL (4×4 MIMO) / 550 Mbps UL (2×2 MIMO)
• 4G LTE Cat 19 fallback: up to 1.6 Gbps DL; Cat 18: 200 Mbps UL
• Dual Mini SIM (2FF) plus consumer eSIM with up to 7 profiles
• Auto SIM failover: weak signal, data limit, roaming, no network, connection failure
• Dual-band Wi-Fi 5 (802.11ac Wave 2): up to 867 Mbps, 150 concurrent clients
• 2 x Gigabit Ethernet (1 x WAN, 1 x LAN), 10/100/1000 Mbps
• 2 x configurable digital I/O on 4-pin power connector; open collector output max 30 V / 300 mA
• 9-50 V DC input with passive PoE Mode B (9-50 V); idle power 3.9 W
• Full VPN suite: OpenVPN, IPsec, WireGuard, Tailscale, ZeroTier, DMVPN, GRE, L2TP
• Modbus TCP, OPC UA, DNP3, DLMS/COSEM, MQTT; Azure IoT Hub, AWS IoT Core; TPM 2.0; -40 to +75 °CSKU: TELTONIKA-RUTM30-N - 4G Routers, CAT6 4G Router, Teltonika, Teltonika 4G Routers
Teltonika RUTX12 Dual LTE Cat 6 Industrial Cellular Router
4G Routers, CAT6 4G Router, Teltonika, Teltonika 4G RoutersTeltonika RUTX12 Dual LTE Cat 6 Industrial Cellular Router
The Teltonika RUTX12 is a powerful dual LTE Cat 6 industrial router designed for mission-critical applications. It offers uninterrupted connectivity with dual LTE modems, providing speeds up to 600 Mbps with load balancing. The robust router features advanced security, remote management, and a durable aluminum housing suitable for harsh environments.Top 6 Key Features:
- Dual LTE Cat 6 Modems for simultaneous high-speed internet up to 600 Mbps
- enables load balancing, hot swap failover or bonded 4G using Bondix service.
- 5 Gigabit Ethernet ports for wired connections up to 1000 Mbps
- Wave-2 802.11ac Dual Band WiFi with speeds up to 867 Mbps
- Advanced security features like VPN, IPsec, PPTP, L2TP, and GNSS tracking
- Remote Management System (RMS) for seamless monitoring and configuration
- Robust aluminium housing with IP30 rating for harsh industrial environments
SKU: TELTONIKA-RUTX12-N - Dual LTE Cat 6 Modems for simultaneous high-speed internet up to 600 Mbps