No products in the basket.
rutos
Showing all 15 results
- 4G Routers, Teltonika, Teltonika 4G Routers, Teltonika eSIM Routers
Teltonika RUT200 Industrial 4G Router with eSIM
4G Routers, Teltonika, Teltonika 4G Routers, Teltonika eSIM RoutersTeltonika RUT200 Industrial 4G Router with eSIM
Teltonika RUT200 (RUT200343000 is the ) is a compact industrial 4G Cat 4 Router with integrated eSIM, supplied with a UK PSU and modem designed for UK and European mobile network connectivity. The built-in eSIM runs alongside a physical Mini SIM (2FF) slot, with configurable switching between them on signal loss, data limit, roaming or network failure – no site visit required to change network.
Key Features:
• 4G LTE Cat 4 – 150 Mbps download / 50 Mbps upload
• Integrated eSIM with up to 7 stored profiles plus 1 x Mini SIM (2FF) physical slot
• Automatic SIM/eSIM failover – triggers on weak signal, data limit, roaming, no network or connection failure
• LTE FDD bands B1, B3, B5, B7, B8, B20, B28 – covers all major UK 4G frequencies
• 802.11b/g/n Wi-Fi access point and station modes, up to 50 simultaneous clients
• 1 x WAN and 1 x LAN, 10/100 Mbps Ethernet (WAN configurable as LAN in RutOS)
• Digital input and digital output on 4-pin industrial power connector
• Passive PoE input on LAN1, 9-30 V DC, Mode B – not compatible with 802.3af/at injectors or switches
• -40 to +75 °C operating temperature, IP30, aluminium enclosure, 125 g
• RutOS with OpenVPN, WireGuard, IPsec, Modbus TCP, MQTT, DNP3 and Teltonika RMS
SKU: TELTONIKA-RUT200-ESIM-N - 4G Routers, Teltonika, Teltonika 4G Routers
Teltonika RUT202 Compact Dual SIM 4G LTE Router
The Teltonika RUT202 is a compact dual SIM 4G LTE Cat 4 industrial router built for embedded and space-constrained installations. It carries two internal Mini SIM slots with automatic failover, digital I/O on the power connector, passive PoE input, and the full RutOS software stack in an anodised aluminium enclosure measuring just 83 x 25 x 74 mm.
Key Features:
• 4G LTE Cat 4 – 150 Mbps download / 50 Mbps upload with 3G and 2G fallback
• Dual internal SIM slots (Mini SIM 2FF, double stacked tray) with automatic failover on weak signal, data limit, roaming, no network, or connection failure
• Digital input and digital output on 4-pin power connector – 0-6 V logic low, 8-30 V logic high; open collector output max 30 V / 300 mA
• Passive PoE input via LAN1 spare pairs, 9-30 VDC – Mode B, not compatible with 802.3af/at/bt
• Wi-Fi 4 (802.11b/g/n) – access point and station modes, WPA3-SAE, up to 50 clients
• 9-30 VDC wide-range DC input via 4-pin industrial power connector; reverse polarity and surge protection
• RutOS with OpenVPN, WireGuard, IPsec, Modbus TCP, OPC UA, MQTT, DNP3 and RMS support
• Anodised aluminium housing; IP30; -40 to +75°C operating range
• DIN rail, wall mount and flat surface mounting (kit sold separately)
• Teltonika RMS compatible – zero-touch provisioning and remote managementSKU: TELTONIKA-RUT202-N - 4G Routers, Teltonika, Teltonika 4G Routers
Teltonika RUT204 CAN BUS LTE Router
The Teltonika RUT204 is a compact 4G LTE Cat 4 router with a native CAN Bus interface, built for vehicle telematics, industrial machine monitoring, and mobile IoT deployments. It combines dual SIM failover, integrated GNSS, RS232 serial, active PoE input, and a wide 9-57 VDC power range in an anodised aluminium enclosure rated to -40 to +75°C.
Key Features:
• 4G LTE Cat 4 – 150 Mbps download / 50 Mbps upload with 3G and 2G fallback
• Native CAN Bus interface via 6-pin terminal block – CAN frame forwarding over IP; CANopen and J1939 client support on firmware roadmap
• Dual internal SIM slots (Mini SIM 2FF, double stacked tray) with automatic failover
• GNSS: GPS, GLONASS, BeiDou, Galileo and QZSS with geofencing and NMEA 0183
• RS232 serial interface (TX/RX) on 6-pin terminal block
• Active PoE input 802.3af Class 0 on LAN port; passive PoE input 16-57 VDC
• Wide-range 9-57 VDC DC power input with reverse polarity and surge protection
• Internal Micro SD slot up to 2 TB for local data logging
• Wi-Fi 4 (802.11b/g/n) – access point and station modes, up to 50 clients
• RutOS with OpenVPN, WireGuard, IPsec, Modbus, MQTT, DNP3 and RMS supportSKU: TELTONIKA-RUT204-N - 4G Routers, Teltonika, Teltonika 4G Routers
Teltonika RUT200 4G LTE Industrial Cellular Router
The Teltonika RUT200 (RUT200013000) is a compact 4G LTE Cat 4 industrial cellular router with a single Mini SIM, 802.11b/g/n Wi-Fi, and two 10/100 Mbps Ethernet ports in a 125 g aluminium housing. It runs RutOS on a Mediatek 580 MHz processor with a full VPN stack, industrial protocol support, digital I/O, and Teltonika RMS compatibility, operating from -40 to +75 °C.
Key Features:
• 4G LTE Cat 4 – 150 Mbps down / 50 Mbps up; automatic fallback to 3G and 2G
• Single Mini SIM (2FF) with auto APN, band lock, and operator block/allow list
• Wi-Fi 4 (802.11b/g/n) – access point and station modes, up to 50 simultaneous clients
• 1 x WAN + 1 x LAN (10/100 Mbps); WAN port configurable as second LAN via RutOS
• 1 x digital input and 1 x digital output on 4-pin power connector
• Passive PoE input via LAN1 – Mode B, 9-30 V DC (not compatible with 802.3af/at/bt)
• VPN: OpenVPN, IPsec, WireGuard, ZeroTier, GRE, L2TP, DMVPN, SSTP, Tinc
• Modbus TCP, OPC UA, DNP3, MQTT broker/publisher, Azure IoT Hub, AWS IoT Core
• Teltonika RMS compatible – remote management, FOTA, alerts, and VPN tunnels
• CE, UKCA, E-mark certified; IP30; 83 x 25 x 74 mm; 125 gSKU: TELTONIKA-RUT200-N - Teltonika, Teltonika 4G Routers
Teltonika RUT901 Industrial 4G LTE Dual SIM Router
The Teltonika RUT901 (RUT901000600) is a compact industrial 4G LTE Cat 4 dual SIM router with four Ethernet ports and RutOS. Successor to the RUT950 and RUT951, it adds dual SIM failover and a full industrial protocol stack in an aluminium DIN-rail enclosure.
Key Features:
• Dual SIM (2x Mini SIM 2FF) with automatic failover – weak signal, data limit, roaming, network denied
• 4G LTE Cat 4 – 150 Mbps download / 50 Mbps upload
• 4x Ethernet (1x WAN, 3x LAN), 10/100 Mbps with auto MDI/MDIX
• Wi-Fi 4 (802.11b/g/n, 2.4 GHz) – up to 100 simultaneous clients, 2x RP-SMA
• 1x Digital Input, 1x Digital Output on 4-pin power connector
• Passive PoE input on LAN1 (Mode B, 9-30 V DC) – not IEEE 802.3af/at compatible
• VPN: OpenVPN, IPsec, WireGuard, ZeroTier, GRE, PPTP, L2TP, Stunnel, DMVPN, SSTP, Tinc
• Modbus TCP, DNP3, MQTT, Data to Server industrial protocol support
• Teltonika RMS remote management and FOTA firmware update
• Operating temperature -40 to +75 °C, IP30, DIN rail or wall mount (kit sold separately)SKU: TELTONIKA-RUT901-N - 4G CCTV, 4G Routers, Teltonika, Teltonika 4G Routers
Teltonika RUT906 4G LTE Industrial Router
The Teltonika RUT906 (RUT906000200) is a 4G LTE Cat 4 industrial router with RS232, RS485, GNSS, and dual SIM. RS232 and RS485 connect legacy serial equipment directly, with GPS, Modbus RTU, BACnet, DNP3, and DLMS all built in.
Key Features:
• Dual SIM (2x Mini SIM 2FF) with auto-failover – weak signal, data limit, roaming, network denied
• 4G LTE Cat 4 – 150 Mbps download / 50 Mbps upload
• RS232 (DB9, RTS/CTS flow control, 300-115200 baud) and RS485 (full and half-duplex, 300-230400 baud)
• GNSS – GPS with NMEA 0183, NTRIP, geofencing, and AVL server support
• 4x Ethernet (1x WAN, 3x LAN), 10/100 Mbps with auto MDI/MDIX
• Wi-Fi 4 (802.11b/g/n, 2.4 GHz) – up to 100 simultaneous clients, 2x RP-SMA
• Analog input (0-24 V / 4-20 mA), isolated digital input, dry contact input, relay output, open collector outputs
• Modbus RTU/TCP, BACnet (RS485/TCP), DNP3, OPC UA, DLMS/COSEM, MQTT industrial protocols
• VPN: OpenVPN, IPsec, WireGuard, ZeroTier, DMVPN, SSTP, L2TP, Stunnel, Tinc, GRE, PPTP
• Operating temperature -40 to +75 °C, IP30, aluminium housing, DIN rail or wall mount (kit sold separately)SKU: TELTONIKA-RUT906-N - 4G CCTV, 4G Routers, Teltonika, Teltonika 4G Routers
Teltonika RUT956 4G LTE Industrial Router
The Teltonika RUT956 is a rugged industrial 4G LTE router with dual-SIM failover, GPS/GNSS, RS232 and RS485 serial ports, digital I/O, WiFi, and advanced RutOS security. Ideal for CCTV, SCADA/telemetry, EV chargers, kiosks, solar sites, and remote monitoring. Securely deploy with multi-network IoT SIMs, RMS remote management, and external antenna options.
Key Features
- Industrial 4G LTE CAT4 router with dual-SIM failover
- RS232 + RS485 for SCADA, PLC and telemetry integration
- GPS/GNSS for tracking and location-aware deployments
- 2.4GHz WiFi hotspot or client mode
- 1× WAN + 3× LAN with VLAN support
- Digital I/O for sensors, relays and remote control
- Powered by RutOS with VPN, firewall, Modbus and MQTT
- RMS compatible for secure remote management and VPN Hub
- External LTE, WiFi and GNSS antennas included
- Ideal for CCTV, EV chargers, solar sites, kiosks and industrial monitoring
TELTONIKA RMS | IoT SIM‘s | Datasheet
SKU: TELTONIKA-RUT956-N - 4G Routers, Teltonika, Teltonika 4G Routers
Teltonika RUT281 Global 4G Router
The Teltonika RUT281 is the smallest industrial LTE Cat 4 router in the Teltonika range, built for reliable global 4G connectivity in space-constrained fixed installations. A Telit modem covering 18 LTE bands delivers single-SKU worldwide deployment, with eSIM support for remote SIM provisioning without an on-site visit.
Key Features:
• Global 4G LTE Cat 4 via Telit modem – 150 Mbps down / 50 Mbps up
• 18 LTE bands: B1, B2, B3, B4, B5, B7, B8, B9, B12, B13, B14, B18, B19, B20, B25, B26, B28
• 3G UMTS (7 bands) and 2G GSM (4 bands) fallback for full global coverage
• 1 x Physical Mini SIM (2FF) + eSIM with up to 7 downloadable profiles
• 2 x 10/100 Mbps Ethernet (1 WAN + 1 LAN) with passive PoE on LAN port
• 802.11b/g/n Wi-Fi – Access Point and Station modes, up to 50 clients
• 1 x Digital Input, 1 x Digital Output on 4-pin industrial power connector
• 9-30 VDC input, less than 4W consumption – DIN rail and wall mountable
• Operating temperature -40 to +65 degrees C, IP30 aluminium housing, 83 x 25 x 74 mm
• RutOS with Modbus TCP, OPC UA, DNP3, DLMS/COSEM, full VPN suite and Teltonika RMS supportSKU: TELTONIKA-RUT281-N - 4G Routers, Teltonika, Teltonika 4G Routers
Teltonika RUT981 Global 4G Router
The Teltonika RUT981 is a global 4G Cat 4 industrial router with dual SIM, eSIM, and four Ethernet ports, built for deployments that need worldwide LTE connectivity from a single hardware SKU. Powered by a Telit modem covering 18 LTE bands, it covers Europe, the Americas, Asia-Pacific, and the Middle East with one order code.
Key Features:
• Global 4G LTE Cat 4 via Telit modem – 150 Mbps down / 50 Mbps up
• 18 LTE bands: B1, B2, B3, B4, B5, B7, B8, B9, B12, B13, B14, B18, B19, B20, B25, B26, B28
• Dual physical SIM (Mini SIM 2FF) plus eSIM with Bootstrap provisioning
• WAN failover and load balancing across SIM 1, SIM 2, and eSIM
• 802.11b/g/n Wi-Fi 4 (2.4 GHz), 2×2 MIMO, up to 100 simultaneous clients
• 4x RJ45 (1x WAN, 3x LAN), 10/100 Mbps
• Passive PoE input (9-30 VDC, Mode B) via LAN1 port
• Digital input and digital output on industrial 4-pin power connector
• DIN rail, wall, and flat surface mounting (kit required)
• RutOS with VPN suite, MQTT, Modbus, and Teltonika RMS support
• -40 to +65 degrees C operating range, IP30, aluminium enclosureSKU: TELTONIKA-RUT981-N - 4G Routers, Teltonika, Teltonika 4G Routers
Teltonika RUT986 Global 4G Router
The Teltonika RUT986 is a global 4G LTE Cat 4 industrial router with RS232, RS485, GNSS, comprehensive I/O, and Micro SD storage, built for SCADA, energy, utilities, and industrial IoT deployments requiring serial connectivity alongside cellular. Powered by a Telit modem covering 18 LTE bands worldwide, it replaces regional hardware variants with a single globally-certified unit.
Key Features:
• Global 4G LTE Cat 4 via Telit modem – 150 Mbps down / 50 Mbps up, 3G/2G fallback
• 18 LTE bands: B1, B2, B3, B4, B5, B7, B8, B9, B12, B13, B14, B18, B19, B20, B25, B26, B28
• Dual physical SIM (Mini SIM 2FF) plus eSIM with Bootstrap provisioning (up to 7 eSIM profiles)
• RS232 (DB9) and RS485 full/half duplex serial ports, 300-115200 baud
• GNSS receiver: GPS, GLONASS, BeiDou, Galileo, QZSS – geofencing, NMEA, NTRIP client
• 4 digital/analog inputs and 3 outputs including SPST relay (40V, 4A) and analog 4-20 mA input
• 1x USB-A port, Micro SD slot (up to 2 TB) for local data logging
• Industrial protocols: Modbus, DNP3, OPC UA, BACnet, DLMS/COSEM
• 4x RJ45 (1x WAN, 3x LAN), 10/100 Mbps, passive PoE input via LAN1
• RutOS with VPN suite (OpenVPN, WireGuard, IPsec), VRF, RMS remote management
• -40 to +65 degrees C, IP30, aluminium enclosure, 110 x 50 x 100 mm, 294 gSKU: TELTONIKA-RUT986-N - 4G Routers, Edge Computing, Teltonika, Teltonika 4G Routers
Teltonika RUTC42 Dual Modem 4G Edge Router
4G Routers, Edge Computing, Teltonika, Teltonika 4G RoutersTeltonika RUTC42 Dual Modem 4G Edge Router
The Teltonika RUTC42 is a dual modem 4G LTE Cat 4 edge router built for industrial deployments where connectivity failure is not an option. Two independent LTE Cat 4 modules deliver true hardware-level redundancy with simultaneous failover and load balancing, backed by Docker container support, RutOS, and full Teltonika RMS integration for remote management at scale.
Key Features:
• Dual 4G LTE Cat 4 modems – 150 Mbps down / 50 Mbps up per modem
• Independent SIM failover per modem with automatic switching between physical SIM and eSIM
• 2x eSIM (consumer type, up to 7 profiles each) + 2x Nano SIM physical slots
• Dual-band Wi-Fi 6 (802.11ax) – 2.4 GHz and 5 GHz with MU-MIMO
• Dual-core ARM Cortex-A53 1.3 GHz CPU, 1 GB RAM, 8 GB flash
• Docker container support for local application hosting
• 5x Gigabit Ethernet ports with passive PoE input on LAN1
• 9-50 VDC wide-range power input, DIN rail mountable
• RutOS with VPN, Modbus, MQTT, and industrial protocol support
• Teltonika RMS remote management compatible – 2-year manufacturer warrantySKU: TELONIKA-RUTC42-N - Teltonika, Teltonika IoT Gateways
Teltonika TRB236 Industrial LTE 450 IoT Gateway
The Teltonika TRB236 is an industrial LTE 450 IoT gateway that delivers Cat 1 or Cat 4 connectivity over the 450 MHz band, giving utility and infrastructure operators reliable cellular coverage in hard-to-reach locations. It connects legacy field equipment to IP networks via RS232, RS485, Ethernet, and configurable I/O, with dual SIM and eSIM support for continuous connection continuity.
TRB236 Key Features:
• LTE 450 MHz connectivity – LTE Band 31 (452.5-457.5 MHz), Band 72 (451-456 MHz), and Band 87 (410-415 MHz)
• Choice of LTE Cat 1 or LTE Cat 4 modem variant to match network requirements
• Standard LTE fallback: FDD Bands 1, 3, 7, 8, 20, 28 and TDD Bands 38, 40
• 3G WCDMA fallback on Bands 1, 8
• RS232 and RS485 serial interfaces for legacy equipment integration
• Configurable digital inputs and outputs via 16-pin industrial terminal block
• Dual Nano SIM + eSIM with automatic failover
• 9-57 VDC wide-range power input
• -40 to +40°C operating temperature
• RutOS with Modbus, MQTT, VPN, and full RMS remote management supportTRB236 Flyer (pdf)
SKU: Teltonika TRB236 - 4G Routers, Edge Computing, Teltonika, Teltonika 4G Routers
Teltonika RUTC41 LTE 4G Edge Router
RUTC41
The Teltonika RUTC41 is a powerful industrial 4G Cat 4 edge router with Wi-Fi 6, dual-core 1.3 GHz CPU, 1 GB RAM, Docker support, and a full suite of RutOS security and VPN features. Designed for modern edge deployments needing local processing and secure connectivity, the RUTC41 delivers exceptional performance in a compact aluminium housing.
Key Features:
- 4G LTE Cat 4 mobile connectivity
- Dual-core 1.3 GHz CPU + 1 GB RAM
- Dual-band Wi-Fi 6 (2.4 GHz & 5 GHz)
- Docker container support
- Dual SIM + eSIM
- 5x Gigabit Ethernet ports
- Wide 9–30 VDC power input
- Industrial-grade aluminium enclosure
- Rugged –40 to 75°C operating range
- RMS compatible
SKU: TELTONIKA-RUTC41-N - 5G Routers, Teltonika, Teltonika 5G Routers, Teltonika eSIM Routers
Teltonika RUTM30 Compact 5G Router
5G Routers, Teltonika, Teltonika 5G Routers, Teltonika eSIM RoutersTeltonika RUTM30 Compact 5G Router
The Teltonika RUTM30 (RUTM30000200) is a compact 5G Sub-6 GHz industrial router with dual Mini SIM and consumer eSIM support, delivering up to 3.4 Gbps download on 5G and 1.6 Gbps on 4G LTE Cat 19 fallback. Running RutOS on a dual-core MediaTek 880 MHz CPU with 256 MB RAM, it combines a full VPN suite, industrial protocol support, and Teltonika RMS compatibility in a 319 g anodised aluminium enclosure.
Key Features:
• 5G Sub-6 GHz SA/NSA: up to 3.4 Gbps DL (4×4 MIMO) / 550 Mbps UL (2×2 MIMO)
• 4G LTE Cat 19 fallback: up to 1.6 Gbps DL; Cat 18: 200 Mbps UL
• Dual Mini SIM (2FF) plus consumer eSIM with up to 7 profiles
• Auto SIM failover: weak signal, data limit, roaming, no network, connection failure
• Dual-band Wi-Fi 5 (802.11ac Wave 2): up to 867 Mbps, 150 concurrent clients
• 2 x Gigabit Ethernet (1 x WAN, 1 x LAN), 10/100/1000 Mbps
• 2 x configurable digital I/O on 4-pin power connector; open collector output max 30 V / 300 mA
• 9-50 V DC input with passive PoE Mode B (9-50 V); idle power 3.9 W
• Full VPN suite: OpenVPN, IPsec, WireGuard, Tailscale, ZeroTier, DMVPN, GRE, L2TP
• Modbus TCP, OPC UA, DNP3, DLMS/COSEM, MQTT; Azure IoT Hub, AWS IoT Core; TPM 2.0; -40 to +75 °CSKU: TELTONIKA-RUTM30-N - 5G Routers, Office 5G Router, Office 5G Router, Teltonika, Teltonika 5G Routers
Teltonika RUTC50 5G Industrial Router with Docker and Wi-Fi 6
5G Routers, Office 5G Router, Office 5G Router, Teltonika, Teltonika 5G RoutersTeltonika RUTC50 5G Industrial Router with Docker and Wi-Fi 6
The Teltonika RUTC50 is an industrial 5G router with Docker support, delivering Sub-6 GHz 5G at up to 3.4 Gbps alongside dual-band Wi-Fi 6, five Gigabit Ethernet ports, and built-in GNSS. It runs on a dual-core ARM Cortex-A53 processor under RutOS and supports eSIM plus dual physical SIM with automatic failover, making it the most capable router in the RUTC edge computing series.
Key Features:
• 5G Sub-6 GHz SA/NSA up to 3.4 Gbps download (4×4 MIMO) / 900 Mbps upload
• Backward compatible with 4G LTE Cat 20 and 3G
• Dual Nano SIM with auto-failover + eSIM support (order code dependent)
• Dual-band Wi-Fi 6 (802.11ax) up to 2,402 Mbps on 5 GHz – supports up to 512 clients
• 5x Gigabit Ethernet (1x WAN, 4x LAN)
• Docker container support for edge application deployment
• Built-in GNSS: GPS, GLONASS, BeiDou, Galileo, QZSS
• Digital input and digital output on 4-pin power connector
• DIN rail, wall mount, and flat surface mounting supported
• RutOS with full VPN suite, Modbus TCP, MQTT, OPC UA and Teltonika RMSSKU: TELTONIKA-RUTC50-ESIM-N
