No products in the basket.
Modbus router
Showing 1–15 of 18 results
- In-Hand Networks, InHand 4G Routers
InHand IR302 Compact Industrial 4G Router
The InHand IR302 (IR302-FQ58-WLAN-S-N) is a compact industrial 4G router for IoT and machine-to-machine sites that need a small, rugged, cloud-managed connection. This is the IR302-FQ58-WLAN-S: LTE Cat 4 for UK, European and APAC networks, with 2.4 GHz Wi-Fi, dual SIM and an RS232/RS485 serial port in a full-metal fanless case.
Key Features:
– Compact industrial 4G LTE Cat 4, up to 150 Mbps down / 50 Mbps up, with 3G and 2G fallback
– Europe/APAC bands (FQ58): 4G FDD B1/B3/B5/B8, TDD B38/B40/B41; 3G B1/B5/B8; 2G B3/B8
– Dual SIM redundancy with ICCID binding and signal-threshold (RSRP) switching
– 2.4 GHz Wi-Fi (802.11 b/g/n), AP, STA or AP+STA, up to 32 clients
– 2 x 10/100 Ethernet: one WAN/LAN switchable, one LAN
– RS232/RS485 serial with DTU (TCP/UDP/MQTT) and Modbus RTU to TCP bridging
– Full VPN suite: IPsec, OpenVPN, WireGuard, ZeroTier, GRE, L2TP, PPTP
– InHand Device Manager and InConnect cloud management
– Wide voltage 9 to 36 V DC, reverse-polarity and surge protection, under 10 W peak
– Full metal, fanless, IP30, DIN rail or wall mount, -40 to +75 degrees C extended
– CE and UKCA certifiedSKU: IR302-FQ58-WLAN-S-N - Teltonika, Teltonika 4G Routers, Teltonika eSIM Routers
Teltonika RUT286 Global LTE Cat 4 Router
The Teltonika RUT286 (RUT286AAAAA0) is an industrial global LTE Cat 4 router with integrated eSIM, dual Mini SIM slots, RS232 and RS485 serial interfaces, and support for 4G bands across Europe, the Americas, Asia-Pacific, and Africa. Powered by a Telit modem and running RutOS, it combines Modbus TCP/RTU, DNP3, DLMS/COSEM, OPC UA, and BACnet with flexible 9-57 V DC or PoE power input in a compact anodised aluminium enclosure.
Key Features:
• Global LTE Cat 4 via Telit modem – 150 Mbps down / 50 Mbps up, with 3G/2G fallback
• Integrated eSIM (consumer type, up to 7 profiles) plus 2 x Mini SIM (2FF) slots
• RS232 and RS485 on a single 6-pin terminal block with Modbus RTU/TCP, DNP3, DLMS, OPC UA, BACnet
• 9-57 V DC industrial power input plus active 802.3af PoE and passive PoE (16-57 V DC) on LAN port
• 802.11b/g/n Wi-Fi with Access Point and Station modes, up to 50 simultaneous clients
• 1 x WAN + 1 x LAN, 10/100 Mbps Ethernet (WAN configurable as LAN)
• Micro SD slot supporting up to 2 TB (FAT32, NTFS, ext2/3/4)
• Full RutOS VPN suite: OpenVPN, IPsec, WireGuard, ZeroTier, GRE, DMVPN, L2TP, Stunnel, SSTP, Tinc
• Teltonika RMS remote management and FOTA support
• Operating temperature -40 to +65 °C, IP30, anodised aluminium housing, 132 gSKU: TELTONIKA-RUT286AAAAA0-N - IoT 4G Gateway, Milesight, Milesight 4G Routers
Milesight UR41 4G Cat 4 Mini Industrial Router with GPS
IoT 4G Gateway, Milesight, Milesight 4G RoutersMilesight UR41 4G Cat 4 Mini Industrial Router with GPS
The Milesight UR41 (UR41-L08EU) is a compact 4G LTE Cat 4 industrial router built for embedded IoT deployments where space, power budget, and serial device connectivity all matter. At 70 x 55 x 22 mm and 103 g, it combines RS232/RS485, digital I/O, GPS/GNSS, and a hardware watchdog in a metal IP30 enclosure rated to -40 to +60 °C.
Key Features:
• 4G LTE Cat 4 – up to 150 Mbps down / 50 Mbps up, with 3G/2G fallback
• GPS/GNSS – GPS, GLONASS, BeiDou, Galileo, QZSS, 2.5 m CEP accuracy
• RS232 or RS485 (software switchable) – Modbus RTU/TCP, transparent serial, DLMS client
• 1 x digital input + 1 x digital output, galvanically isolated, 3.5 mm terminal block
• Dual power input: 5-24 V DC terminal block or 5 V USB Type-C
• Power-saving standby and idle modes – 6.3 mA standby at 12 V
• Hardware watchdog for automatic recovery from cellular or system failures
• VPN support: IPsec, OpenVPN, WireGuard, GRE, L2TP, PPTP, DMVPN, ZeroTier
• Remote management via Milesight Development Platform and MilesightVPN
• Desk, wall, and DIN rail mounting – 70 x 55 x 22 mm, 103 gSKU: MILESIGHT-UR41-L08EU-N - Milesight, Milesight 4G Routers
Milesight UR41L 4G Cat 1 Mini Industrial Router
The Milesight UR41L (UR41L-L0CEU) is a compact 4G LTE Cat 1 industrial router built for cost-sensitive M2M and IoT deployments where low power consumption and serial device connectivity matter more than peak throughput. At 70 x 55 x 22 mm and 103 g, it combines RS232/RS485, galvanically isolated digital I/O, and a hardware watchdog in a metal IP30 enclosure rated to -40 to +60 °C.
Key Features:
• 4G LTE Cat 1 connectivity for low-throughput M2M and IoT applications
• RS232 or RS485 (software switchable) – Modbus RTU/TCP, transparent serial, DLMS client
• 1 x digital input + 1 x digital output, galvanically isolated, 3.5 mm terminal block
• Dual power input: 5-24 V DC terminal block or 5 V USB Type-C
• Ultra-low standby power: 6.3 mA at 12 V – suitable for battery and solar-powered installs
• Hardware watchdog for automatic recovery from cellular or system failures
• VPN support: IPsec, OpenVPN, WireGuard, GRE, L2TP, PPTP, DMVPN, ZeroTier
• Remote management via Milesight DeviceHub and MilesightVPN
• Scheduled wake, SMS wake, and DI wake for power-managed deployments
• Desk, wall, and DIN rail mounting – 70 x 55 x 22 mm, 103 gSKU: MILESIGHT-UR41L-L0CEU - 4G Routers, Milesight, Milesight 4G Routers
Milesight UR32 Pro Series 4G Router with Serial (RS232/RS485), 2 x Ethernet, DIO (UR32-L0GEU-485)
4G Routers, Milesight, Milesight 4G RoutersMilesight UR32 Pro Series 4G Router with Serial (RS232/RS485), 2 x Ethernet, DIO (UR32-L0GEU-485)
The Milesight UR32-L0GEU-485 is the entry point to the UR32 Pro Series: a compact industrial 4G LTE Cat 4 router with dual SIM failover, a software-selectable RS232/RS485 serial port, two Ethernet ports and galvanically isolated digital I/O. It carries no Wi-Fi radio, no GPS and no PoE PSE output, which makes it the right specification for panel-mounted telemetry where the only requirements are cellular backhaul and serial equipment integration.
Key Features:
4G LTE Cat 4 – 150 Mbps down / 50 Mbps up, with 3G and 2G fallback
Dual Mini SIM (2FF), 1.8 V / 3 V, with automatic carrier failover
1 x RS232/RS485 serial port, software selectable in the web UI
Modbus RTU to Modbus TCP gateway, plus transparent TCP, UDP, MQTT and DLMS client modes
2 x RJ45 10/100 Mbps Ethernet, 1 x WAN + 1 x LAN or 2 x LAN, 1.5 kV isolation
1 x digital input and 1 x digital output, galvanic isolation, 3.5 mm terminal block
MicroSD slot for local logging and extended storage
VPN: OpenVPN, IPsec, WireGuard, ZeroTier, GRE, L2TP, PPTP, DMVPN spoke
Python SDK for edge logic on the router itself
Ships with a 12 V UK mains PSU, runs from any 9 to 48 V DC rail, typical 1.9 W
-40 to +70 degrees C, IP30 metal housing, DIN rail or wall mount
3-year manufacturer warrantySKU: MILESIGHT-UR32-L0GEU-485 - 4G Routers, Milesight, Milesight 4G Routers
Milesight UR32 Pro Series 4G Router with Serial (RS232/RS485), WiFi, 2 x Ethernet, DIO (UR32-L0GEU-W-485)
4G Routers, Milesight, Milesight 4G RoutersMilesight UR32 Pro Series 4G Router with Serial (RS232/RS485), WiFi, 2 x Ethernet, DIO (UR32-L0GEU-W-485)
The Milesight UR32-L0GEU-W-485 is a compact industrial 4G LTE Cat 4 router with dual SIM failover, 2.4 GHz Wi-Fi, and RS485 serial connectivity for direct integration with Modbus instruments and industrial equipment. It runs from 9 to 48 V DC, mounts on a DIN rail or wall, and operates from -40 to +70°C.
Key Features:
• 4G LTE Cat 4 – 150 Mbps down / 50 Mbps up, with automatic 3G/2G fallback
• Dual Mini SIM (2FF) with automatic carrier failover
• 2x RJ45 10/100 Mbps Ethernet – 1x WAN + 1x LAN, configurable as 2x LAN
• 802.11b/g/n Wi-Fi 2.4 GHz – AP and client modes, up to 15 simultaneous connections
• RS232/RS485 serial port (software selectable) – Modbus RTU/TCP gateway, transparent TCP, UDP, MQTT, and DLMS modes
• 1x digital input + 1x digital output, galvanic isolation, SMS and MQTT triggers
• MicroSD slot for local data logging and extended storage
• VPN – OpenVPN, IPsec, WireGuard, ZeroTier, GRE, L2TP, PPTP, DMVPN
• Python SDK for custom edge application development
• Operating temperature -40 to +70°C, IP30, DIN rail and wall mountSKU: MILESIGHT-UR32-L0GEU-W-485 - 4G CCTV, 4G Routers With POE PSE, Milesight, Milesight 4G Routers
Milesight UR32 Pro Series 4G Router with POE Out, Serial (RS232/RS485), WiFi, 2 x Ethernet, DIO (UR32-L0GEU-P-W-485)
4G CCTV, 4G Routers With POE PSE, Milesight, Milesight 4G RoutersMilesight UR32 Pro Series 4G Router with POE Out, Serial (RS232/RS485), WiFi, 2 x Ethernet, DIO (UR32-L0GEU-P-W-485)
The Milesight UR32-L0GEU-P-W-485 is a compact industrial 4G LTE Cat 4 router with dual SIM, built-in 802.3af/at PoE PSE output, 2.4 GHz Wi-Fi, and RS485 serial connectivity for industrial equipment integration. It delivers 4G cellular backhaul and can power IP cameras or other PoE devices directly from the same unit, removing the need for a separate injector on remote installations.
Key Features:
• 4G LTE Cat 4 – 150 Mbps down / 50 Mbps up, with 3G/2G fallback
• Dual Mini SIM (2FF) with automatic carrier failover
• 802.3af/at PoE PSE on both LAN ports – up to 30 W per port, 60 W total (48 V DC input required)
• 802.11b/g/n Wi-Fi 2.4 GHz – AP and client modes, up to 15 simultaneous connections
• RS485 serial port with Modbus RTU/TCP gateway and transparent TCP/MQTT modes
• 1x digital input + 1x digital output, galvanic isolation
• MicroSD slot for local data logging and extended storage
• VPN support – OpenVPN, IPsec, WireGuard, ZeroTier, GRE, L2TP, PPTP, DMVPN
• Python SDK for custom application and edge logic development
• Operating temperature -40 to +70°C, DIN rail and wall mount, 9-48 V DC inputSKU: MILESIGHT-UR32-L0GEU-P-W-485-N - Milesight, Milesight 4G Routers
Milesight UR35-L0GEU Industrial 4G Router with Serial and I/O
The Milesight UR35 (UR35-L0GEU) is the entry-level UR35 variant: an industrial 4G LTE Cat 4 router with dual SIM failover, RS232 and RS485 serial, and isolated digital I/O. It has no Wi-Fi and no PoE output, which makes it the clean serial and telemetry workhorse of the range in a rugged IP30 metal enclosure for M2M and IoT field sites.
Key Features:
- 4G LTE Cat 4 across EU bands, up to 150 Mbps down and 50 Mbps up, with 3G and 2G fallback
- Dual SIM with automated failover between two carriers, once configured
- 1 x RS232 and 1 x RS485 serial on a 3.5 mm terminal block, 300 to 230400 bps
- 1 isolated digital input and 1 isolated digital output for field signalling
- Five 10/100 Ethernet ports (1 WAN + 4 LAN), 1.5 kV isolation
- NXP ARM Cortex-A7 processor, 128 MB RAM, 128 MB flash, microSD slot
- Modbus RTU to TCP gateway, DLMS/COSEM client, MQTT, SNMP and TR069
- OpenVPN, IPsec, WireGuard, ZeroTier, GRE, L2TP, PPTP and DMVPN
- No Wi-Fi and no PoE on this variant (choose the -W or -P builds for those)
- IP30 metal build, -40 to +70 C, 9 to 48 V DC input
SKU: MILESIGHT-UR35-L0GEU - 4G Routers With POE PSE, Milesight, Milesight 4G Routers
Milesight UR35-L0GEU-P Industrial 4G Router with POE Out
4G Routers With POE PSE, Milesight, Milesight 4G RoutersMilesight UR35-L0GEU-P Industrial 4G Router with POE Out
The Milesight UR35 (UR35-L04EU-P) is an industrial 4G LTE Cat 4 router with dual SIM failover and four 802.3af/at PoE PSE ports. It powers IP cameras, access points, and other PoE devices straight from its LAN ports over a single cable, in a rugged IP30 metal enclosure for M2M and IoT field sites.
Key Features:
– 4G LTE Cat 4 across EU bands, up to 150 Mbps down and 50 Mbps up, with 3G and 2G fallback
– Four 802.3af/at PoE PSE ports on LAN1 to LAN4, 48 V DC input required
– Dual SIM with automated failover between two carriers
– Five 10/100 Ethernet ports (1 WAN + 4 LAN), 1.5 kV isolation
– 1 x RS232 and 1 x RS485 serial on a 3.5 mm terminal block
– 1 isolated digital input and 1 isolated digital output
– NXP ARM Cortex-A7 processor, 128 MB RAM, 128 MB flash, microSD slot
– Modbus RTU to TCP gateway, MQTT, DLMS, SNMP and TR069
– OpenVPN, IPsec, WireGuard, ZeroTier, GRE, L2TP, PPTP and DMVPN
– IP30 metal build, -40 to +70 C, 9 to 48 V DC inputSKU: MILESIGHT-UR35-L0GEU-P - 4G Routers With POE PSE, Milesight, Milesight 4G Routers
Milesight UR35-L0GEU-P-W Industrial 4G Router with Wi-Fi and PoE
4G Routers With POE PSE, Milesight, Milesight 4G RoutersMilesight UR35-L0GEU-P-W Industrial 4G Router with Wi-Fi and PoE
Milesight UR35 Industrial 4G Dual SIM Router with Wi-Fi and PoE (UR35-L0GEU-P-W)
The Milesight UR35-L0GEU-P-W is a rugged industrial 4G LTE Cat 4 router with dual SIM failover, 802.11b/g/n Wi-Fi, and four 802.3af/at PoE output ports for powering connected devices directly from the router. Built on an ARM Cortex-A7 processor with a hardened IP30 metal enclosure, it operates from -40 to +70 °C and supports RS232, RS485, digital I/O, Modbus, DLMS/COSEM, MQTT, and a full VPN suite including WireGuard, OpenVPN, and IPsec.
Key Features:
• 4G LTE Cat 4 with dual Mini SIM (2FF) slots and automatic SIM failover
• 4 x 802.3af/at PoE PSE LAN ports — up to 30 W per port, 60 W total
• 802.11b/g/n Wi-Fi (2.4 GHz) in AP or client mode, up to 15 simultaneous connections
• 5 x Fast Ethernet ports (1 x WAN, 4 x LAN); WAN port configurable as LAN
• RS232 + RS485 serial ports with Modbus RTU/TCP gateway, DLMS/COSEM client
• 1 x digital input and 1 x digital output with galvanic isolation on 3.5 mm terminal block
• VPN support: WireGuard, OpenVPN, IPsec, GRE, L2TP, PPTP, DMVPN, ZeroTier
• Hardware watchdog, VRRP, dual SIM backup, and ping-based failover
• Python SDK embedded for secondary development and custom application logic
• 9-48 V DC input (48 V required for PoE output); -40 to +70 °C operating rangeSKU: MILESIGHT-UR35-L0GEU-P-W-N - Milesight, Milesight 4G Routers
Milesight UR35-L0GEU-W Industrial 4G Router with Wi-Fi
The Milesight UR35 (UR35-L04EU-W) is an industrial 4G LTE Cat 4 router with dual SIM failover and 2.4 GHz Wi-Fi. It combines five Ethernet ports, RS232 and RS485 serial, and isolated digital I/O in a rugged IP30 metal enclosure for M2M and IoT field sites.
Key Features:
– 4G LTE Cat 4 across EU bands, up to 150 Mbps down and 50 Mbps up, with 3G and 2G fallback
– Dual SIM with automated failover between two carriers
– Wi-Fi 802.11 b/g/n at 2.4 GHz, access point or client mode, up to 15 clients
– Five 10/100 Ethernet ports (1 WAN + 4 LAN), 1.5 kV isolation
– 1 x RS232 and 1 x RS485 serial on a 3.5 mm terminal block
– 1 isolated digital input and 1 isolated digital output
– NXP ARM Cortex-A7 processor, 128 MB RAM, 128 MB flash, microSD slot
– Modbus RTU to TCP gateway, MQTT, DLMS, SNMP and TR069
– OpenVPN, IPsec, WireGuard, ZeroTier, GRE, L2TP, PPTP and DMVPN
– IP30 metal build, -40 to +70 C, 9 to 48 V DC inputSKU: MILESIGHT-UR35-L0GEU-W - 5G CCTV, 5G Routers, Milesight, Milesight 5G Routers
Milesight UR75 Industrial 5G Router with Wi-Fi 6 and GPS
5G CCTV, 5G Routers, Milesight, Milesight 5G RoutersMilesight UR75 Industrial 5G Router with Wi-Fi 6 and GPS
The Milesight UR75-504AE-W2 is an industrial-grade 5G router from the Ultra Series, built for M2M and IoT deployments where high throughput, serial connectivity, and environmental resilience are all required. It pairs a quad-core ARM Cortex-A55 processor with global 5G Sub-6 GHz support, dual SIM failover, Wi-Fi 6, integrated multi-constellation GNSS, and RS232/RS485 serial ports in a compact IP30 metal enclosure rated to -40°C.
UR75-504AE-W2 Key Features:
• 5G Sub-6 GHz NSA/SA with dual carrier aggregation – up to 4.67 Gbps download
• 4G LTE and WCDMA fallback with automatic dual SIM failover
• Dual Mini SIM-2FF slots (1.8V/3V)
• Quad-core ARM Cortex-A55 2 GHz CPU, 1 GB LPDDR4x RAM, 1 GB NAND Flash
• Wi-Fi 6 dual-band: 2.4 GHz 600 Mbps + 5 GHz 1200 Mbps (2×2 MIMO per band)
• 5 x Gigabit Ethernet: 1 x WAN + 4 x LAN
• RS232 + RS485 serial ports with Modbus TCP/RTU gateway support
• GPS/GLONASS/BDS/Galileo/QZSS positioning (2m CEP accuracy)
• 1 x DI + 1 x DO (galvanic isolation) and M.2 NVMe SSD expansion slot
• Node-RED, Milesight DeviceHub remote management, MilesightVPN
• -40°C to +70°C operating range, IP30 metal housing, DIN rail mountable
• 3-year manufacturer warrantyIf you need a 5G Router with POE then please view the Milesight UR75-504AE-P-W2
SKU: MILESIGHT-UR75-504AE-W2 - 5G Routers, Milesight, Milesight 5G Routers
Milesight UR75 Industrial 5G PoE Router with Wi-Fi 6 and GPS (POE Version UR75-504AE-P-W2)
5G Routers, Milesight, Milesight 5G RoutersMilesight UR75 Industrial 5G PoE Router with Wi-Fi 6 and GPS (POE Version UR75-504AE-P-W2)
The Milesight UR75-504AE-P-W2 is an industrial 5G router from the Ultra Series with 4-port 802.3 af/at PoE PSE, built for deployments where the router must also power IP cameras, wireless access points, or other PoE-compatible devices over the LAN ports. It combines 5G Sub-6 GHz connectivity, quad-core processing, Wi-Fi 6, integrated GPS, and RS232/RS485 serial ports in a compact IP30 metal enclosure rated to -40°C. A 48V DC power adapter is included.
UR75-504AE-P-W2 Key Features:
• 5G Sub-6 GHz NSA/SA with dual carrier aggregation – up to 4.67 Gbps download
• 4G LTE and WCDMA fallback with automatic dual SIM failover
• Dual Mini SIM-2FF slots (1.8V/3V)
• Quad-core ARM Cortex-A55 2 GHz CPU, 1 GB LPDDR4x RAM, 1 GB NAND Flash
• Wi-Fi 6 dual-band: 2.4 GHz 600 Mbps + 5 GHz 1200 Mbps (2×2 MIMO per band)
• 5 x Gigabit Ethernet: 1 x WAN + 4 x LAN with 802.3 af/at PoE PSE (30W per port, 60W total)
• RS232 + RS485 serial ports with Modbus TCP/RTU gateway support
• GPS/GLONASS/BDS/Galileo/QZSS positioning (2m CEP accuracy)
• 1 x DI + 1 x DO (galvanic isolation) and M.2 NVMe SSD expansion slot
• Node-RED, Milesight DeviceHub remote management, MilesightVPN
• -40°C to +70°C operating range, IP30 metal housing, DIN rail mountable
• 48V power adapter included, 3-year manufacturer warrantyIf you do not require POE then please view the Milesight UR75-504AE-W2
SKU: MILESIGHT-UR75-504AE-P-W2 - 5G Routers, Milesight, Milesight 5G Routers, Office 5G Router, Outdoor 5G Router
Milesight UF51-504AE-W4 5G Outdoor CPE with Wi-Fi 6
5G Routers, Milesight, Milesight 5G Routers, Office 5G Router, Outdoor 5G RouterMilesight UF51-504AE-W4 5G Outdoor CPE with Wi-Fi 6
The Milesight UF51-504AE-W4 is a 5G Sub-6 GHz outdoor CPE with Wi-Fi 6, an IP67-rated polycarbonate and cast aluminium enclosure, and built-in GPS, RS485 serial, and galvanically isolated DI/DO. It combines 5G cellular backhaul with dual-band Wi-Fi 6 local connectivity in a single weatherproof outdoor unit, making it the right choice for deployments where both 5G uplink and on-site wireless access are required.
Milesight UF51-504AE-W4 Key Features:
• 5G NR SA/NSA Sub-6 GHz – bands N1/N3/N5/N7/N8/N20/N28/N38/N40/N41/N77/N78
• Downlink up to 4.67 Gbps with 5G dual carrier aggregation (2CC CA)
• Wi-Fi 6 (802.11ax) dual-band – 2.4 GHz (up to 1200 Mbps) and 5 GHz (up to 2400 Mbps), 4 x 4 MIMO
• Quad-core ARM Cortex-A55, 2 GHz / 1 GB LPDDR4x RAM / 1 GB NAND Flash
• 1 x 10/100/1000/2500 Mbps WAN/LAN port + 1 x 10/100/1000 Mbps LAN port
• 802.3at PoE PD on WAN port – single cable power and data
• Built-in GPS/GLONASS/Beidou/Galileo/QZSS with 2 m CEP accuracy
• 1 x RS485 serial port (RS232 hardware optional) with Modbus TCP/RTU support
• 1 x DI + 1 x DO with galvanic isolation
• VPN support: OpenVPN, IPsec, L2TP, PPTP
• Node-RED edge application runtime built in
• IP67 rated – pole, wall, desktop, or bottom screw mounting
• Available without WiFi – see UF51-504AESKU: MILESIGHT-UF51-504AE-W4 - 4G Routers, Robustel, Robustel 4G Routers
Robustel R1511e
The Robustel R1511e is a compact industrial 4G LTE router with a fully embedded MFF2 eSIM, covering global LTE bands across 4G, 3G, and 2G networks. It connects Ethernet and RS-232 or RS-485 serial equipment over cellular, with automatic failover, built-in Modbus RTU to TCP conversion, and full remote management via the RCMS cloud platform.
Key Features:
• Global 4G LTE Cat 4 via embedded MFF2 eSIM – LTE FDD B1/2/3/4/5/7/8/12/13/18/19/20/25/26/28/66, LTE TDD B38/39/40/41
• GSMA SGP.22 compliant – up to 6 eSIM profiles with remote provisioning and switching
• 2 x 10/100 Mbps Ethernet – configurable as dual LAN or 1x LAN + 1x WAN
• 1 x RS-232 or RS-485 serial port (hardware configured) with built-in Modbus RTU to TCP gateway
• 2.4 GHz Wi-Fi 802.11 b/g/n – AP and client modes
• IPsec, OpenVPN, GRE, and WireGuard VPN tunnels
• RobustVPN provides a fixed IP address on any eSIM profile
• Automatic failover across 4G, Ethernet, and Wi-Fi
• RCMS cloud platform for remote device monitoring and eSIM profile management
• DIN rail, wall, and desktop mounting – operating range -25 to +70°CSKU: n/a
