No products in the basket.
cellular router UK
Showing all 8 results
- Milesight, Milesight 4G Routers
Milesight UR32S Lite Series 4G Router with WiFi, 2 x Ethernet (UR32S-L0GEU)
Milesight, Milesight 4G RoutersMilesight UR32S Lite Series 4G Router with WiFi, 2 x Ethernet (UR32S-L0GEU)
The Milesight UR32S-L0GEU is a compact Lite Series industrial 4G LTE Cat 4 router with 2.4 GHz Wi-Fi, two Ethernet ports and automatic failover between a wired WAN and the cellular network. Wi-Fi is the reason to choose it over the UR32L, and it works in both AP and client mode, which lets an engineer bind the router to the M-Sight Pro app from a phone or bring the site online over an existing wireless network.
Key Features:
4G LTE Cat 4 with 3G and 2G fallback, 150 Mbps down / 50 Mbps up
2.4 GHz 802.11b/g/n Wi-Fi, AP mode or client mode
Automatic failover and failback between Ethernet WAN and cellular
1 x Mini SIM (2FF) slot, 1.8 V / 3 V
2 x RJ45 10/100 Mbps Ethernet, 1 x WAN + 1 x LAN or 2 x LAN, 1.5 kV isolation
1 x SMA cellular antenna connector and 1 x RP-SMA Wi-Fi antenna connector
VPN: IPsec, OpenVPN, GRE, L2TP, PPTP and DMVPN
MilesightVPN and M-Sight Pro app support for remote camera and NVR access
Remote management through the Milesight Development Platform and DeviceHub
ARM Cortex-A7 528 MHz, 128 MB DDR3 RAM, 128 MB flash, hardware watchdog
9 to 48 V DC, typical 1.8 W, surge and reverse polarity protection
-40 to +70 degrees C, IP30 metal housing, DIN rail, wall or desktop mountSKU: MILESIGHT-UR32S-L0GEU-N - 4G Routers With POE PSE, Milesight, Milesight 4G Routers
Milesight UR32S Lite Series 4G Router with WiFi, 2 x Ethernet and POE Out (UR32S-L0GEU-P)
4G Routers With POE PSE, Milesight, Milesight 4G RoutersMilesight UR32S Lite Series 4G Router with WiFi, 2 x Ethernet and POE Out (UR32S-L0GEU-P)
The Milesight UR32S-L0GEU-P is a compact Lite Series industrial 4G LTE Cat 4 router with 802.3af/at PoE PSE output on both LAN ports, 2.4 GHz Wi-Fi and automatic failover between a wired WAN and cellular. It powers an IP camera, access point or door reader directly from the router, which removes the injector from the enclosure and leaves one device to install, power and maintain at a remote site.
Key Features:
802.3af/at PoE PSE on both LAN ports, 30 W per port and 60 W total
Ships with the 48 V UK mains PSU that the PoE ports require, no extra supply to buy
4G LTE Cat 4 with 3G and 2G fallback, 150 Mbps down / 50 Mbps up
2.4 GHz 802.11b/g/n Wi-Fi, AP mode or client mode
Automatic failover and failback between Ethernet WAN and cellular
1 x Mini SIM (2FF) slot, 1.8 V / 3 V
2 x RJ45 10/100 Mbps Ethernet, 1.5 kV isolation
1 x SMA cellular antenna connector and 1 x RP-SMA Wi-Fi antenna connector
VPN: IPsec, OpenVPN, GRE, L2TP, PPTP and DMVPN
MilesightVPN and M-Sight Pro app support for remote camera and NVR access
Remote management through the Milesight Development Platform and DeviceHub
-40 to +70 degrees C, IP30 metal housing, DIN rail, wall or desktop mountSKU: MILESIGHT-UR32S-L0GEU-P - 4G Routers, Milesight, Milesight 4G Routers
Milesight UR32L-L0GEU 4G Router with 2 x Ethernet
The Milesight UR32L (UR32L-L0GEU) is a compact industrial 4G LTE Cat 4 router built for M2M and remote monitoring deployments where reliable cellular WAN and Ethernet connectivity are the only requirements. It carries a full VPN stack including WireGuard and OpenVPN, supports remote fleet management via the Milesight Development Platform, and draws just 1.8 W in normal operation.
Key Features:
• 4G LTE Cat 4 – 150 Mbps down / 50 Mbps up, with 3G/2G fallback
• Single Mini SIM (2FF), 1.8 V / 3 V
• 2x RJ45 10/100 Mbps Ethernet – 1x WAN + 1x LAN, configurable as 2x LAN
• Automatic WAN failover from Ethernet to cellular on link loss
• VPN – OpenVPN, IPsec, WireGuard, ZeroTier, GRE, L2TP (client), PPTP (client), DMVPN (spoke)
• Remote management via DeviceHub and Milesight Development Platform
• SNMP v1/v2c/v3, TR-069, SMS management and on-demand dial-up
• Hardware watchdog with automatic recovery
• Typical 1.8 W power consumption, 9-48 V DC input
• Operating temperature -40 to +70°C, IP30, DIN rail and wall mount, 3-year warrantySKU: MILESIGHT-UR32L-L0GEU-N - 4G CCTV, 4G Routers, 4G Routers With POE PSE, Milesight, Milesight 4G Routers
Milesight UR32L-L0GEU-P 4G Router with PoE
4G CCTV, 4G Routers, 4G Routers With POE PSE, Milesight, Milesight 4G RoutersMilesight UR32L-L0GEU-P 4G Router with PoE
The Milesight UR32L Lite with POE (UR32L-L0GEU-P) is a compact industrial 4G LTE Cat 4 router with 802.3af/at PoE PSE output on both LAN ports, combining cellular WAN and the ability to power IP cameras or other PoE devices directly from a single unit. It carries a full VPN stack, supports remote fleet management via the Milesight Development Platform, and draws 1.8 W in normal operation – rising when PoE devices are connected.
Key Features:
• 4G LTE Cat 4 – 150 Mbps down / 50 Mbps up, with 3G/2G fallback
• Single Mini SIM (2FF), 1.8 V / 3 V
• 2x RJ45 10/100 Mbps Ethernet – 1x WAN + 1x LAN, configurable as 2x LAN
• 802.3af/at PoE PSE on both LAN ports – up to 30 W per port, 60 W total (48 V DC input required)
• Automatic WAN failover from Ethernet to cellular on link loss
• VPN – OpenVPN, IPsec, WireGuard, ZeroTier, GRE, L2TP (client), PPTP (client), DMVPN (spoke)
• Remote management via DeviceHub and Milesight Development Platform
• SNMP v1/v2c/v3, TR-069, SMS management and on-demand dial-up
• Hardware watchdog with automatic recovery
• Operating temperature -40 to +70°C, IP30, DIN rail and wall mount, 3-year warrantySKU: MILESIGHT-UR32L-L0GEU-P - 4G Routers, Milesight, Milesight 4G Routers
Milesight UR32 Pro Series 4G Router with Serial (RS232/RS485), 2 x Ethernet, DIO (UR32-L0GEU-485)
4G Routers, Milesight, Milesight 4G RoutersMilesight UR32 Pro Series 4G Router with Serial (RS232/RS485), 2 x Ethernet, DIO (UR32-L0GEU-485)
The Milesight UR32-L0GEU-485 is the entry point to the UR32 Pro Series: a compact industrial 4G LTE Cat 4 router with dual SIM failover, a software-selectable RS232/RS485 serial port, two Ethernet ports and galvanically isolated digital I/O. It carries no Wi-Fi radio, no GPS and no PoE PSE output, which makes it the right specification for panel-mounted telemetry where the only requirements are cellular backhaul and serial equipment integration.
Key Features:
4G LTE Cat 4 – 150 Mbps down / 50 Mbps up, with 3G and 2G fallback
Dual Mini SIM (2FF), 1.8 V / 3 V, with automatic carrier failover
1 x RS232/RS485 serial port, software selectable in the web UI
Modbus RTU to Modbus TCP gateway, plus transparent TCP, UDP, MQTT and DLMS client modes
2 x RJ45 10/100 Mbps Ethernet, 1 x WAN + 1 x LAN or 2 x LAN, 1.5 kV isolation
1 x digital input and 1 x digital output, galvanic isolation, 3.5 mm terminal block
MicroSD slot for local logging and extended storage
VPN: OpenVPN, IPsec, WireGuard, ZeroTier, GRE, L2TP, PPTP, DMVPN spoke
Python SDK for edge logic on the router itself
Ships with a 12 V UK mains PSU, runs from any 9 to 48 V DC rail, typical 1.9 W
-40 to +70 degrees C, IP30 metal housing, DIN rail or wall mount
3-year manufacturer warrantySKU: MILESIGHT-UR32-L0GEU-485 - 4G Routers, Milesight, Milesight 4G Routers
Milesight UR32 Pro Series 4G Router with Serial (RS232/RS485), WiFi, 2 x Ethernet, DIO (UR32-L0GEU-W-485)
4G Routers, Milesight, Milesight 4G RoutersMilesight UR32 Pro Series 4G Router with Serial (RS232/RS485), WiFi, 2 x Ethernet, DIO (UR32-L0GEU-W-485)
The Milesight UR32-L0GEU-W-485 is a compact industrial 4G LTE Cat 4 router with dual SIM failover, 2.4 GHz Wi-Fi, and RS485 serial connectivity for direct integration with Modbus instruments and industrial equipment. It runs from 9 to 48 V DC, mounts on a DIN rail or wall, and operates from -40 to +70°C.
Key Features:
• 4G LTE Cat 4 – 150 Mbps down / 50 Mbps up, with automatic 3G/2G fallback
• Dual Mini SIM (2FF) with automatic carrier failover
• 2x RJ45 10/100 Mbps Ethernet – 1x WAN + 1x LAN, configurable as 2x LAN
• 802.11b/g/n Wi-Fi 2.4 GHz – AP and client modes, up to 15 simultaneous connections
• RS232/RS485 serial port (software selectable) – Modbus RTU/TCP gateway, transparent TCP, UDP, MQTT, and DLMS modes
• 1x digital input + 1x digital output, galvanic isolation, SMS and MQTT triggers
• MicroSD slot for local data logging and extended storage
• VPN – OpenVPN, IPsec, WireGuard, ZeroTier, GRE, L2TP, PPTP, DMVPN
• Python SDK for custom edge application development
• Operating temperature -40 to +70°C, IP30, DIN rail and wall mountSKU: MILESIGHT-UR32-L0GEU-W-485 - 4G CCTV, 4G Routers With POE PSE, Milesight, Milesight 4G Routers
Milesight UR32 Pro Series 4G Router with POE Out, Serial (RS232/RS485), WiFi, 2 x Ethernet, DIO (UR32-L0GEU-P-W-485)
4G CCTV, 4G Routers With POE PSE, Milesight, Milesight 4G RoutersMilesight UR32 Pro Series 4G Router with POE Out, Serial (RS232/RS485), WiFi, 2 x Ethernet, DIO (UR32-L0GEU-P-W-485)
The Milesight UR32-L0GEU-P-W-485 is a compact industrial 4G LTE Cat 4 router with dual SIM, built-in 802.3af/at PoE PSE output, 2.4 GHz Wi-Fi, and RS485 serial connectivity for industrial equipment integration. It delivers 4G cellular backhaul and can power IP cameras or other PoE devices directly from the same unit, removing the need for a separate injector on remote installations.
Key Features:
• 4G LTE Cat 4 – 150 Mbps down / 50 Mbps up, with 3G/2G fallback
• Dual Mini SIM (2FF) with automatic carrier failover
• 802.3af/at PoE PSE on both LAN ports – up to 30 W per port, 60 W total (48 V DC input required)
• 802.11b/g/n Wi-Fi 2.4 GHz – AP and client modes, up to 15 simultaneous connections
• RS485 serial port with Modbus RTU/TCP gateway and transparent TCP/MQTT modes
• 1x digital input + 1x digital output, galvanic isolation
• MicroSD slot for local data logging and extended storage
• VPN support – OpenVPN, IPsec, WireGuard, ZeroTier, GRE, L2TP, PPTP, DMVPN
• Python SDK for custom application and edge logic development
• Operating temperature -40 to +70°C, DIN rail and wall mount, 9-48 V DC inputSKU: MILESIGHT-UR32-L0GEU-P-W-485-N - Outdoor 5G Router
InHand Networks ODU12 Outdoor 5G FWA Router
The InHand Networks ODU12 is an outdoor 5G FWA router with fully integrated antennas, Wi-Fi 7 and an IP65 enclosure, built for fixed wireless access where indoor coverage is weak. Power and data run over a single PoE cable and the unit is fanless, with no external whips to mount or aim.
EMEA edition expected Q1 2027. Need an outdoor 5G CPE in the UK now? See the Milesight UF51-504AE-W4
Key Features:
– Outdoor 5G FWA router: 5G NR Sub-6, NSA and SA, 3GPP Release 16
– Modem peak 7.01 Gbps down / 2.5 Gbps up, with 4G LTE Cat 19 fallback
– Wi-Fi 7 (802.11be) dual-band BE5000, up to 128 clients
– 8 x 5G, 3 x Wi-Fi and 1 x GPS antennas fully integrated for 360 degree coverage
– Dual 4FF nano-SIM hot backup, plus a reserved eSIM
– 2 x 2.5 GbE RJ45: WAN is PoE-powered, LAN is dual-LAN configurable
– Quad-core Cortex-A55 2.2 GHz, 2 GB DDR4, 32 GB eMMC
– IEEE 802.3at PoE powered (802.3af compatible), under 18 W
– IP65 die-cast aluminium enclosure, fanless, -30 to +70 degrees C operating
– InCloud Manager cloud management with QR-code mobile onboardingSKU: InHand-ODU12
