No products in the basket.
4g router uk
Showing all 11 results
- 4G Routers, Milesight, Milesight 4G Routers
Milesight UR32L-L0GEU 4G Router with 2 x Ethernet
The Milesight UR32L (UR32L-L0GEU) is a compact industrial 4G LTE Cat 4 router built for M2M and remote monitoring deployments where reliable cellular WAN and Ethernet connectivity are the only requirements. It carries a full VPN stack including WireGuard and OpenVPN, supports remote fleet management via the Milesight Development Platform, and draws just 1.8 W in normal operation.
Key Features:
• 4G LTE Cat 4 – 150 Mbps down / 50 Mbps up, with 3G/2G fallback
• Single Mini SIM (2FF), 1.8 V / 3 V
• 2x RJ45 10/100 Mbps Ethernet – 1x WAN + 1x LAN, configurable as 2x LAN
• Automatic WAN failover from Ethernet to cellular on link loss
• VPN – OpenVPN, IPsec, WireGuard, ZeroTier, GRE, L2TP (client), PPTP (client), DMVPN (spoke)
• Remote management via DeviceHub and Milesight Development Platform
• SNMP v1/v2c/v3, TR-069, SMS management and on-demand dial-up
• Hardware watchdog with automatic recovery
• Typical 1.8 W power consumption, 9-48 V DC input
• Operating temperature -40 to +70°C, IP30, DIN rail and wall mount, 3-year warrantySKU: UR32L-L0GEU - 4G Routers, Milesight, Milesight 4G Routers
Milesight UR32 Pro Series 4G Router with Serial (RS232/RS485), WiFi, 2 x Ethernet, DIO (UR32-L0GEU-W-485)
4G Routers, Milesight, Milesight 4G RoutersMilesight UR32 Pro Series 4G Router with Serial (RS232/RS485), WiFi, 2 x Ethernet, DIO (UR32-L0GEU-W-485)
The Milesight UR32-L0GEU-W-485 is a compact industrial 4G LTE Cat 4 router with dual SIM failover, 2.4 GHz Wi-Fi, and RS485 serial connectivity for direct integration with Modbus instruments and industrial equipment. It runs from 9 to 48 V DC, mounts on a DIN rail or wall, and operates from -40 to +70°C.
Key Features:
• 4G LTE Cat 4 – 150 Mbps down / 50 Mbps up, with automatic 3G/2G fallback
• Dual Mini SIM (2FF) with automatic carrier failover
• 2x RJ45 10/100 Mbps Ethernet – 1x WAN + 1x LAN, configurable as 2x LAN
• 802.11b/g/n Wi-Fi 2.4 GHz – AP and client modes, up to 15 simultaneous connections
• RS232/RS485 serial port (software selectable) – Modbus RTU/TCP gateway, transparent TCP, UDP, MQTT, and DLMS modes
• 1x digital input + 1x digital output, galvanic isolation, SMS and MQTT triggers
• MicroSD slot for local data logging and extended storage
• VPN – OpenVPN, IPsec, WireGuard, ZeroTier, GRE, L2TP, PPTP, DMVPN
• Python SDK for custom edge application development
• Operating temperature -40 to +70°C, IP30, DIN rail and wall mountSKU: UR32-L0GEU-W-485 - 4G CCTV, Milesight, Milesight 4G Routers
Milesight UR32 Pro Series 4G Router with POE In/Out, Serial (RS232/RS485), WiFi, 2 x Ethernet, DIO (UR32-L0GEU-P-W-485)
4G CCTV, Milesight, Milesight 4G RoutersMilesight UR32 Pro Series 4G Router with POE In/Out, Serial (RS232/RS485), WiFi, 2 x Ethernet, DIO (UR32-L0GEU-P-W-485)
The Milesight UR32-L0GEU-P-W-485 is a compact industrial 4G LTE Cat 4 router with dual SIM, built-in 802.3af/at PoE PSE output, 2.4 GHz Wi-Fi, and RS485 serial connectivity for industrial equipment integration. It delivers 4G cellular backhaul and can power IP cameras or other PoE devices directly from the same unit, removing the need for a separate injector on remote installations.
Key Features:
• 4G LTE Cat 4 – 150 Mbps down / 50 Mbps up, with 3G/2G fallback
• Dual Mini SIM (2FF) with automatic carrier failover
• 802.3af/at PoE PSE on both LAN ports – up to 30 W per port, 60 W total (48 V DC input required)
• 802.11b/g/n Wi-Fi 2.4 GHz – AP and client modes, up to 15 simultaneous connections
• RS485 serial port with Modbus RTU/TCP gateway and transparent TCP/MQTT modes
• 1x digital input + 1x digital output, galvanic isolation
• MicroSD slot for local data logging and extended storage
• VPN support – OpenVPN, IPsec, WireGuard, ZeroTier, GRE, L2TP, PPTP, DMVPN
• Python SDK for custom application and edge logic development
• Operating temperature -40 to +70°C, DIN rail and wall mount, 9-48 V DC inputSKU: UR32-L0GEU-P-W-485 - 4G Routers, Teltonika, Teltonika 4G Routers, Teltonika eSIM Routers
Teltonika RUT200 Industrial 4G Router with eSIM
4G Routers, Teltonika, Teltonika 4G Routers, Teltonika eSIM RoutersTeltonika RUT200 Industrial 4G Router with eSIM
Teltonika RUT200 (RUT200343000 is the ) is a compact industrial 4G Cat 4 Router with integrated eSIM, supplied with a UK PSU and modem designed for UK and European mobile network connectivity. The built-in eSIM runs alongside a physical Mini SIM (2FF) slot, with configurable switching between them on signal loss, data limit, roaming or network failure – no site visit required to change network.
Key Features:
• 4G LTE Cat 4 – 150 Mbps download / 50 Mbps upload
• Integrated eSIM with up to 7 stored profiles plus 1 x Mini SIM (2FF) physical slot
• Automatic SIM/eSIM failover – triggers on weak signal, data limit, roaming, no network or connection failure
• LTE FDD bands B1, B3, B5, B7, B8, B20, B28 – covers all major UK 4G frequencies
• 802.11b/g/n Wi-Fi access point and station modes, up to 50 simultaneous clients
• 1 x WAN and 1 x LAN, 10/100 Mbps Ethernet (WAN configurable as LAN in RutOS)
• Digital input and digital output on 4-pin industrial power connector
• Passive PoE input on LAN1, 9-30 V DC, Mode B – not compatible with 802.3af/at injectors or switches
• -40 to +75 °C operating temperature, IP30, aluminium enclosure, 125 g
• RutOS with OpenVPN, WireGuard, IPsec, Modbus TCP, MQTT, DNP3 and Teltonika RMS
SKU: TELTONIKA-RUT200-ESIM-N - 4G Routers, Teltonika, Teltonika 4G Routers
Teltonika RUT202 Compact Dual SIM 4G LTE Router
The Teltonika RUT202 is a compact dual SIM 4G LTE Cat 4 industrial router built for embedded and space-constrained installations. It carries two internal Mini SIM slots with automatic failover, digital I/O on the power connector, passive PoE input, and the full RutOS software stack in an anodised aluminium enclosure measuring just 83 x 25 x 74 mm.
Key Features:
• 4G LTE Cat 4 – 150 Mbps download / 50 Mbps upload with 3G and 2G fallback
• Dual internal SIM slots (Mini SIM 2FF, double stacked tray) with automatic failover on weak signal, data limit, roaming, no network, or connection failure
• Digital input and digital output on 4-pin power connector – 0-6 V logic low, 8-30 V logic high; open collector output max 30 V / 300 mA
• Passive PoE input via LAN1 spare pairs, 9-30 VDC – Mode B, not compatible with 802.3af/at/bt
• Wi-Fi 4 (802.11b/g/n) – access point and station modes, WPA3-SAE, up to 50 clients
• 9-30 VDC wide-range DC input via 4-pin industrial power connector; reverse polarity and surge protection
• RutOS with OpenVPN, WireGuard, IPsec, Modbus TCP, OPC UA, MQTT, DNP3 and RMS support
• Anodised aluminium housing; IP30; -40 to +75°C operating range
• DIN rail, wall mount and flat surface mounting (kit sold separately)
• Teltonika RMS compatible – zero-touch provisioning and remote managementSKU: TELTONIKA-RUT202-N - 4G Routers, Teltonika, Teltonika 4G Routers
Teltonika RUT204 CAN BUS LTE Router
The Teltonika RUT204 is a compact 4G LTE Cat 4 router with a native CAN Bus interface, built for vehicle telematics, industrial machine monitoring, and mobile IoT deployments. It combines dual SIM failover, integrated GNSS, RS232 serial, active PoE input, and a wide 9-57 VDC power range in an anodised aluminium enclosure rated to -40 to +75°C.
Key Features:
• 4G LTE Cat 4 – 150 Mbps download / 50 Mbps upload with 3G and 2G fallback
• Native CAN Bus interface via 6-pin terminal block – CAN frame forwarding over IP; CANopen and J1939 client support on firmware roadmap
• Dual internal SIM slots (Mini SIM 2FF, double stacked tray) with automatic failover
• GNSS: GPS, GLONASS, BeiDou, Galileo and QZSS with geofencing and NMEA 0183
• RS232 serial interface (TX/RX) on 6-pin terminal block
• Active PoE input 802.3af Class 0 on LAN port; passive PoE input 16-57 VDC
• Wide-range 9-57 VDC DC power input with reverse polarity and surge protection
• Internal Micro SD slot up to 2 TB for local data logging
• Wi-Fi 4 (802.11b/g/n) – access point and station modes, up to 50 clients
• RutOS with OpenVPN, WireGuard, IPsec, Modbus, MQTT, DNP3 and RMS supportSKU: TELTONIKA-RUT204-N - 4G Routers, Teltonika, Teltonika 4G Routers
Teltonika RUT200 4G LTE Industrial Cellular Router
The Teltonika RUT200 (RUT200013000) is a compact 4G LTE Cat 4 industrial cellular router with a single Mini SIM, 802.11b/g/n Wi-Fi, and two 10/100 Mbps Ethernet ports in a 125 g aluminium housing. It runs RutOS on a Mediatek 580 MHz processor with a full VPN stack, industrial protocol support, digital I/O, and Teltonika RMS compatibility, operating from -40 to +75 °C.
Key Features:
• 4G LTE Cat 4 – 150 Mbps down / 50 Mbps up; automatic fallback to 3G and 2G
• Single Mini SIM (2FF) with auto APN, band lock, and operator block/allow list
• Wi-Fi 4 (802.11b/g/n) – access point and station modes, up to 50 simultaneous clients
• 1 x WAN + 1 x LAN (10/100 Mbps); WAN port configurable as second LAN via RutOS
• 1 x digital input and 1 x digital output on 4-pin power connector
• Passive PoE input via LAN1 – Mode B, 9-30 V DC (not compatible with 802.3af/at/bt)
• VPN: OpenVPN, IPsec, WireGuard, ZeroTier, GRE, L2TP, DMVPN, SSTP, Tinc
• Modbus TCP, OPC UA, DNP3, MQTT broker/publisher, Azure IoT Hub, AWS IoT Core
• Teltonika RMS compatible – remote management, FOTA, alerts, and VPN tunnels
• CE, UKCA, E-mark certified; IP30; 83 x 25 x 74 mm; 125 gSKU: TELTONIKA-RUT200-N - Teltonika, Teltonika 4G Routers
Teltonika RUT901 Industrial 4G LTE Dual SIM Router
The Teltonika RUT901 (RUT901000600) is a compact industrial 4G LTE Cat 4 dual SIM router with four Ethernet ports and RutOS. Successor to the RUT950 and RUT951, it adds dual SIM failover and a full industrial protocol stack in an aluminium DIN-rail enclosure.
Key Features:
• Dual SIM (2x Mini SIM 2FF) with automatic failover – weak signal, data limit, roaming, network denied
• 4G LTE Cat 4 – 150 Mbps download / 50 Mbps upload
• 4x Ethernet (1x WAN, 3x LAN), 10/100 Mbps with auto MDI/MDIX
• Wi-Fi 4 (802.11b/g/n, 2.4 GHz) – up to 100 simultaneous clients, 2x RP-SMA
• 1x Digital Input, 1x Digital Output on 4-pin power connector
• Passive PoE input on LAN1 (Mode B, 9-30 V DC) – not IEEE 802.3af/at compatible
• VPN: OpenVPN, IPsec, WireGuard, ZeroTier, GRE, PPTP, L2TP, Stunnel, DMVPN, SSTP, Tinc
• Modbus TCP, DNP3, MQTT, Data to Server industrial protocol support
• Teltonika RMS remote management and FOTA firmware update
• Operating temperature -40 to +75 °C, IP30, DIN rail or wall mount (kit sold separately)SKU: TELTONIKA-RUT901-N - 4G CCTV, 4G Routers, Teltonika, Teltonika 4G Routers
Teltonika RUT906 4G LTE Industrial Router
The Teltonika RUT906 (RUT906000200) is a 4G LTE Cat 4 industrial router with RS232, RS485, GNSS, and dual SIM. RS232 and RS485 connect legacy serial equipment directly, with GPS, Modbus RTU, BACnet, DNP3, and DLMS all built in.
Key Features:
• Dual SIM (2x Mini SIM 2FF) with auto-failover – weak signal, data limit, roaming, network denied
• 4G LTE Cat 4 – 150 Mbps download / 50 Mbps upload
• RS232 (DB9, RTS/CTS flow control, 300-115200 baud) and RS485 (full and half-duplex, 300-230400 baud)
• GNSS – GPS with NMEA 0183, NTRIP, geofencing, and AVL server support
• 4x Ethernet (1x WAN, 3x LAN), 10/100 Mbps with auto MDI/MDIX
• Wi-Fi 4 (802.11b/g/n, 2.4 GHz) – up to 100 simultaneous clients, 2x RP-SMA
• Analog input (0-24 V / 4-20 mA), isolated digital input, dry contact input, relay output, open collector outputs
• Modbus RTU/TCP, BACnet (RS485/TCP), DNP3, OPC UA, DLMS/COSEM, MQTT industrial protocols
• VPN: OpenVPN, IPsec, WireGuard, ZeroTier, DMVPN, SSTP, L2TP, Stunnel, Tinc, GRE, PPTP
• Operating temperature -40 to +75 °C, IP30, aluminium housing, DIN rail or wall mount (kit sold separately)SKU: TELTONIKA-RUT906-N - 4G Routers, CAT6 4G Router, Teltonika, Teltonika 4G Routers
Teltonika RUTX12 Dual LTE Cat 6 Industrial Cellular Router
4G Routers, CAT6 4G Router, Teltonika, Teltonika 4G RoutersTeltonika RUTX12 Dual LTE Cat 6 Industrial Cellular Router
The Teltonika RUTX12 is a powerful dual LTE Cat 6 industrial router designed for mission-critical applications. It offers uninterrupted connectivity with dual LTE modems, providing speeds up to 600 Mbps with load balancing. The robust router features advanced security, remote management, and a durable aluminum housing suitable for harsh environments.Top 6 Key Features:
- Dual LTE Cat 6 Modems for simultaneous high-speed internet up to 600 Mbps
- enables load balancing, hot swap failover or bonded 4G using Bondix service.
- 5 Gigabit Ethernet ports for wired connections up to 1000 Mbps
- Wave-2 802.11ac Dual Band WiFi with speeds up to 867 Mbps
- Advanced security features like VPN, IPsec, PPTP, L2TP, and GNSS tracking
- Remote Management System (RMS) for seamless monitoring and configuration
- Robust aluminium housing with IP30 rating for harsh industrial environments
SKU: TELTONIKA-RUTX12-N - Dual LTE Cat 6 Modems for simultaneous high-speed internet up to 600 Mbps
- No Longer Stocked
Teltonika TCR100 4G Router
The Teltonika TCR100 4G Router is a high speed LTE-A 4G router designed to be used in home and small office environments whilst maintaining many of the features of Teltonika IoT routers. High Speed WiFi and 4G LTE connectivity along with ethernet connections give you multiple ways to connect.
No Longer Stocked
SKU: TELTONIKA-TCR100-N
