Rural Broadband solutions sometimes need innovative ideas to ensure a reliable, high speed 4G or 5G Internet service in rural locations for users that need high speed Internet connectivity.
Traditional wired Broadband (ADSL) is usually very slow due to the distance the premises is away from the local exchange so many rural users including homes, businesses and farms have opted for higher speed 4G Internet connections using a 4G router and 4G SIM card. In many cases this solves the initial problem of getting a faster Internet connection, but with standard 4G SIM connections there is usually not the option on cheaper, standard SIM card plans to get remote access to your router. This is due to 4G networks using CGNAT which means that you cant get a dedicated IP address, or use dynamic DNS (DYNDNS) to remotely access your router or use port forwarding.
This remote access over 4G issue can be overcome with the use of a Fixed IP SIM card which is a service that provides your 4G connection with a public, static IP address so you can access your 4G router and use port forwarding to connect to devices on the LAN. However, these types of services incur a higher cost and once you need to use more than 5GB per month of data become alot more expensive than standard, unlimited data SIM cards.
With the roll-out of 5G masts, with a plan to roll our many rural 5G base stations, the option of getting much faster 5G rural broadband is appealing to many rural farms, business and home users, but he cost of accessing these means a higher priced 5G router and perhaps an outdoor 4G or 5G antenna, usually a directional antenna and the cost of 5G Fixed IP SIM cards if you need remote access to your router may prove prohibitive to many rural Internet users.
A solution could be an SD-WAN connection like the SD WAN PRO which can take several 4G or 5G Internet connections and bond them together to create a high speed bonded Internet solution, with low latency and best of all it provides a single, public IPv4 IP address so you can remotely access your LAN and the SD-WAN solution bonds the multiple connections so you can utilise your existing 4G routers, add extra 4G or 5G routers into the mix and get a much faster bonded internet for rural broadband.
There is a cost for the SDWANPRO box and a monthly service charge but it does give businesses the option of having high speed rural broadband and of course you can use standard, unlimited data SIM cards with the SD WAN PRO because you do not need the expensive Fixed IP SIM Cards. This means you can have a high speed rural Internet service with no cap on your monthly data so it might be worthwhile talking to us about how SD WAN PRO can help you achieve your bandwidth goals for your rural home, office or farm.
5G Routers And Antennas
Teltonika RUTX10 Professional Ethernet Router (4 x GB Ethernet), WiFi and Bluetooth
The Teltonika RUTX10 is a non-cellular industrial router with Gigabit Ethernet, dual-band Wi-Fi 5 and built-in Bluetooth LE. It gathers Bluetooth sensor data and routes it over a wired or Wi-Fi connection, so it suits sites that already have fixed backhaul and need a BLE hub rather than a modem.
Key Features:
– Bluetooth Low Energy with a dedicated RP-SMA antenna connector
– 4 x Gigabit Ethernet ports, 1 x WAN (configurable as LAN) and 3 x LAN
– Dual-band Wi-Fi 5 (802.11ac Wave-2) with MU-MIMO, up to 867 Mbps
– No cellular modem and no SIM slot, wired or Wi-Fi backhaul only
– Quad-core ARM Cortex A7 CPU, 256 MB RAM, 256 MB flash
– RutOS with OpenVPN, IPsec, DMVPN and firewall
– USB 2.0 for storage, USB-to-serial and external devices
– 1 x digital input and 1 x digital output for monitoring and control
– 9 to 50 V DC power, passive PoE over the LAN port
– DIN rail mountable, -40 to +75 degrees C, IP30
– Teltonika RMS remote management compatible
– 2-year manufacturer warranty
– RUTX10000300 / Standard package with UK PSU
Teltonika RUT261 Compact CAT6 LTE 4G Router with WiFi and Ethernet
Teltonika RUT261 Compact CAT6 LTE 4G Router with WiFi and Ethernet
The Teltonika RUT261 is a compact 4G LTE Cat 6 industrial router for space-constrained and embedded installations. Carrier aggregation lifts it to 300 Mbps download, so it holds the small RUT200 footprint while adding real Cat 6 speed.
Key features:
– 4G LTE Cat 6 with carrier aggregation, 300 Mbps down and 50 Mbps up
– Single Mini SIM (2FF) with external front-panel holder
– Wi-Fi 4 (802.11b/g/n) access point and station, WPA3, up to 50 clients
– 2 x Fast Ethernet ports, 1 WAN and 1 LAN, WAN reconfigurable as LAN
– 1 x digital input and 1 x digital output on the 4-pin power connector
– Passive PoE input on LAN1, 9 to 30 V DC, Mode B
– Full RutOS: OpenVPN, WireGuard, IPsec, Modbus TCP, DNP3, OPC UA, MQTT
– Teltonika RMS remote management and monitoring
– 9 to 30 V DC input, reverse polarity and surge protection, -40 to 75 degrees C
– Aluminium housing, 83 x 25 x 74 mm, IP30, DIN rail mountable
– RUT261AADAA0 is the part code for the RUT261 with UK PSU
QuWireless QuMax AX50M Directional Antenna Enclosure for Teltonika RUTX50
QuWireless QuMax AX50M Directional Antenna Enclosure for Teltonika RUTX50
The QuWireless AX50M QuMax (AX50M) is a directional outdoor antenna that houses a Teltonika RUTX50 inside the antenna housing itself. It combines a 4×4 MIMO 5G/LTE panel antenna, a dual-band Wi-Fi antenna and an active GPS antenna in one IP68 enclosure, so the router connects through short internal pigtails instead of long external coax.
Key Features:
• Directional 4×4 MIMO 5G/LTE panel antenna covering 617 MHz to 6.5 GHz
• Peak gain 8 dBi across 1.0 GHz to 3.08 GHz, 6.8 dBi across 3.3 GHz to 5.0 GHz
• Integrated dual-band Wi-Fi antenna and active GPS antenna
• Houses Teltonika RUTX50, RUTM51, RUTM54, RUTM55 or RUTM16 (router sold separately)
• 80 degree horizontal and vertical beamwidth, X-polarisation at plus and minus 45 degrees
• 4 x SMA internal connections on RG316 cable
• VSWR below 2.00 typical, below 3.00 maximum
• IP68 and IP67 certified housing, operating range -40 to +80 degrees C
• Supports LTE band 20, band 28 and band 71 plus 5G NR n77, n78 and n79
• Pole and wall mounting hardware supplied, made in Europe
Milesight UR32S Lite Series 4G Router with WiFi, 2 x Ethernet and POE Out (UR32S-L0GEU-P)
Milesight UR32S Lite Series 4G Router with WiFi, 2 x Ethernet and POE Out (UR32S-L0GEU-P)
The Milesight UR32S-L0GEU-P is a compact Lite Series industrial 4G LTE Cat 4 router with 802.3af/at PoE PSE output on both LAN ports, 2.4 GHz Wi-Fi and automatic failover between a wired WAN and cellular. It powers an IP camera, access point or door reader directly from the router, which removes the injector from the enclosure and leaves one device to install, power and maintain at a remote site.
Key Features:
802.3af/at PoE PSE on both LAN ports, 30 W per port and 60 W total
Ships with the 48 V UK mains PSU that the PoE ports require, no extra supply to buy
4G LTE Cat 4 with 3G and 2G fallback, 150 Mbps down / 50 Mbps up
2.4 GHz 802.11b/g/n Wi-Fi, AP mode or client mode
Automatic failover and failback between Ethernet WAN and cellular
1 x Mini SIM (2FF) slot, 1.8 V / 3 V
2 x RJ45 10/100 Mbps Ethernet, 1.5 kV isolation
1 x SMA cellular antenna connector and 1 x RP-SMA Wi-Fi antenna connector
VPN: IPsec, OpenVPN, GRE, L2TP, PPTP and DMVPN
MilesightVPN and M-Sight Pro app support for remote camera and NVR access
Remote management through the Milesight Development Platform and DeviceHub
-40 to +70 degrees C, IP30 metal housing, DIN rail, wall or desktop mount
Milesight UR32S Lite Series 4G Router with WiFi, 2 x Ethernet (UR32S-L0GEU)
Milesight UR32S Lite Series 4G Router with WiFi, 2 x Ethernet (UR32S-L0GEU)
The Milesight UR32S-L0GEU is a compact Lite Series industrial 4G LTE Cat 4 router with 2.4 GHz Wi-Fi, two Ethernet ports and automatic failover between a wired WAN and the cellular network. Wi-Fi is the reason to choose it over the UR32L, and it works in both AP and client mode, which lets an engineer bind the router to the M-Sight Pro app from a phone or bring the site online over an existing wireless network.
Key Features:
4G LTE Cat 4 with 3G and 2G fallback, 150 Mbps down / 50 Mbps up
2.4 GHz 802.11b/g/n Wi-Fi, AP mode or client mode
Automatic failover and failback between Ethernet WAN and cellular
1 x Mini SIM (2FF) slot, 1.8 V / 3 V
2 x RJ45 10/100 Mbps Ethernet, 1 x WAN + 1 x LAN or 2 x LAN, 1.5 kV isolation
1 x SMA cellular antenna connector and 1 x RP-SMA Wi-Fi antenna connector
VPN: IPsec, OpenVPN, GRE, L2TP, PPTP and DMVPN
MilesightVPN and M-Sight Pro app support for remote camera and NVR access
Remote management through the Milesight Development Platform and DeviceHub
ARM Cortex-A7 528 MHz, 128 MB DDR3 RAM, 128 MB flash, hardware watchdog
9 to 48 V DC, typical 1.8 W, surge and reverse polarity protection
-40 to +70 degrees C, IP30 metal housing, DIN rail, wall or desktop mount
Milesight UR32 Pro Series 4G Router with Serial (RS232/RS485), 2 x Ethernet, DIO (UR32-L0GEU-485)
Milesight UR32 Pro Series 4G Router with Serial (RS232/RS485), 2 x Ethernet, DIO (UR32-L0GEU-485)
The Milesight UR32-L0GEU-485 is the entry point to the UR32 Pro Series: a compact industrial 4G LTE Cat 4 router with dual SIM failover, a software-selectable RS232/RS485 serial port, two Ethernet ports and galvanically isolated digital I/O. It carries no Wi-Fi radio, no GPS and no PoE PSE output, which makes it the right specification for panel-mounted telemetry where the only requirements are cellular backhaul and serial equipment integration.
Key Features:
4G LTE Cat 4 – 150 Mbps down / 50 Mbps up, with 3G and 2G fallback
Dual Mini SIM (2FF), 1.8 V / 3 V, with automatic carrier failover
1 x RS232/RS485 serial port, software selectable in the web UI
Modbus RTU to Modbus TCP gateway, plus transparent TCP, UDP, MQTT and DLMS client modes
2 x RJ45 10/100 Mbps Ethernet, 1 x WAN + 1 x LAN or 2 x LAN, 1.5 kV isolation
1 x digital input and 1 x digital output, galvanic isolation, 3.5 mm terminal block
MicroSD slot for local logging and extended storage
VPN: OpenVPN, IPsec, WireGuard, ZeroTier, GRE, L2TP, PPTP, DMVPN spoke
Python SDK for edge logic on the router itself
Ships with a 12 V UK mains PSU, runs from any 9 to 48 V DC rail, typical 1.9 W
-40 to +70 degrees C, IP30 metal housing, DIN rail or wall mount
3-year manufacturer warranty
InHand IR302 Compact Industrial 4G Router
The InHand IR302 (IR302-FQ58-WLAN-S-N) is a compact industrial 4G router for IoT and machine-to-machine sites that need a small, rugged, cloud-managed connection. This is the IR302-FQ58-WLAN-S: LTE Cat 4 for UK, European and APAC networks, with 2.4 GHz Wi-Fi, dual SIM and an RS232/RS485 serial port in a full-metal fanless case.
Key Features:
– Compact industrial 4G LTE Cat 4, up to 150 Mbps down / 50 Mbps up, with 3G and 2G fallback
– Europe/APAC bands (FQ58): 4G FDD B1/B3/B5/B8, TDD B38/B40/B41; 3G B1/B5/B8; 2G B3/B8
– Dual SIM redundancy with ICCID binding and signal-threshold (RSRP) switching
– 2.4 GHz Wi-Fi (802.11 b/g/n), AP, STA or AP+STA, up to 32 clients
– 2 x 10/100 Ethernet: one WAN/LAN switchable, one LAN
– RS232/RS485 serial with DTU (TCP/UDP/MQTT) and Modbus RTU to TCP bridging
– Full VPN suite: IPsec, OpenVPN, WireGuard, ZeroTier, GRE, L2TP, PPTP
– InHand Device Manager and InConnect cloud management
– Wide voltage 9 to 36 V DC, reverse-polarity and surge protection, under 10 W peak
– Full metal, fanless, IP30, DIN rail or wall mount, -40 to +75 degrees C extended
– CE and UKCA certified
InHand Networks ODU12 Outdoor 5G FWA Router
The InHand Networks ODU12 is an outdoor 5G FWA router with fully integrated antennas, Wi-Fi 7 and an IP65 enclosure, built for fixed wireless access where indoor coverage is weak. Power and data run over a single PoE cable and the unit is fanless, with no external whips to mount or aim.
EMEA edition expected Q1 2027. Need an outdoor 5G CPE in the UK now? See the Milesight UF51-504AE-W4
Key Features:
– Outdoor 5G FWA router: 5G NR Sub-6, NSA and SA, 3GPP Release 16
– Modem peak 7.01 Gbps down / 2.5 Gbps up, with 4G LTE Cat 19 fallback
– Wi-Fi 7 (802.11be) dual-band BE5000, up to 128 clients
– 8 x 5G, 3 x Wi-Fi and 1 x GPS antennas fully integrated for 360 degree coverage
– Dual 4FF nano-SIM hot backup, plus a reserved eSIM
– 2 x 2.5 GbE RJ45: WAN is PoE-powered, LAN is dual-LAN configurable
– Quad-core Cortex-A55 2.2 GHz, 2 GB DDR4, 32 GB eMMC
– IEEE 802.3at PoE powered (802.3af compatible), under 18 W
– IP65 die-cast aluminium enclosure, fanless, -30 to +70 degrees C operating
– InCloud Manager cloud management with QR-code mobile onboarding