No products in the basket.
SCADA router
Showing 1–15 of 17 results
- In-Hand Networks, InHand 4G Routers
InHand IR302 Compact Industrial 4G Router
The InHand IR302 (IR302-FQ58-WLAN-S-N) is a compact industrial 4G router for IoT and machine-to-machine sites that need a small, rugged, cloud-managed connection. This is the IR302-FQ58-WLAN-S: LTE Cat 4 for UK, European and APAC networks, with 2.4 GHz Wi-Fi, dual SIM and an RS232/RS485 serial port in a full-metal fanless case.
Key Features:
– Compact industrial 4G LTE Cat 4, up to 150 Mbps down / 50 Mbps up, with 3G and 2G fallback
– Europe/APAC bands (FQ58): 4G FDD B1/B3/B5/B8, TDD B38/B40/B41; 3G B1/B5/B8; 2G B3/B8
– Dual SIM redundancy with ICCID binding and signal-threshold (RSRP) switching
– 2.4 GHz Wi-Fi (802.11 b/g/n), AP, STA or AP+STA, up to 32 clients
– 2 x 10/100 Ethernet: one WAN/LAN switchable, one LAN
– RS232/RS485 serial with DTU (TCP/UDP/MQTT) and Modbus RTU to TCP bridging
– Full VPN suite: IPsec, OpenVPN, WireGuard, ZeroTier, GRE, L2TP, PPTP
– InHand Device Manager and InConnect cloud management
– Wide voltage 9 to 36 V DC, reverse-polarity and surge protection, under 10 W peak
– Full metal, fanless, IP30, DIN rail or wall mount, -40 to +75 degrees C extended
– CE and UKCA certifiedSKU: IR302-FQ58-WLAN-S-N - Teltonika, Teltonika 4G Routers, Teltonika eSIM Routers
Teltonika RUT286 Global LTE Cat 4 Router
The Teltonika RUT286 (RUT286AAAAA0) is an industrial global LTE Cat 4 router with integrated eSIM, dual Mini SIM slots, RS232 and RS485 serial interfaces, and support for 4G bands across Europe, the Americas, Asia-Pacific, and Africa. Powered by a Telit modem and running RutOS, it combines Modbus TCP/RTU, DNP3, DLMS/COSEM, OPC UA, and BACnet with flexible 9-57 V DC or PoE power input in a compact anodised aluminium enclosure.
Key Features:
• Global LTE Cat 4 via Telit modem – 150 Mbps down / 50 Mbps up, with 3G/2G fallback
• Integrated eSIM (consumer type, up to 7 profiles) plus 2 x Mini SIM (2FF) slots
• RS232 and RS485 on a single 6-pin terminal block with Modbus RTU/TCP, DNP3, DLMS, OPC UA, BACnet
• 9-57 V DC industrial power input plus active 802.3af PoE and passive PoE (16-57 V DC) on LAN port
• 802.11b/g/n Wi-Fi with Access Point and Station modes, up to 50 simultaneous clients
• 1 x WAN + 1 x LAN, 10/100 Mbps Ethernet (WAN configurable as LAN)
• Micro SD slot supporting up to 2 TB (FAT32, NTFS, ext2/3/4)
• Full RutOS VPN suite: OpenVPN, IPsec, WireGuard, ZeroTier, GRE, DMVPN, L2TP, Stunnel, SSTP, Tinc
• Teltonika RMS remote management and FOTA support
• Operating temperature -40 to +65 °C, IP30, anodised aluminium housing, 132 gSKU: TELTONIKA-RUT286-N - 4G Routers, Milesight, Milesight 4G Routers
Milesight UR32 Pro Series 4G Router with Serial (RS232/RS485), 2 x Ethernet, DIO (UR32-L0GEU-485)
4G Routers, Milesight, Milesight 4G RoutersMilesight UR32 Pro Series 4G Router with Serial (RS232/RS485), 2 x Ethernet, DIO (UR32-L0GEU-485)
The Milesight UR32-L0GEU-485 is the entry point to the UR32 Pro Series: a compact industrial 4G LTE Cat 4 router with dual SIM failover, a software-selectable RS232/RS485 serial port, two Ethernet ports and galvanically isolated digital I/O. It carries no Wi-Fi radio, no GPS and no PoE PSE output, which makes it the right specification for panel-mounted telemetry where the only requirements are cellular backhaul and serial equipment integration.
Key Features:
4G LTE Cat 4 – 150 Mbps down / 50 Mbps up, with 3G and 2G fallback
Dual Mini SIM (2FF), 1.8 V / 3 V, with automatic carrier failover
1 x RS232/RS485 serial port, software selectable in the web UI
Modbus RTU to Modbus TCP gateway, plus transparent TCP, UDP, MQTT and DLMS client modes
2 x RJ45 10/100 Mbps Ethernet, 1 x WAN + 1 x LAN or 2 x LAN, 1.5 kV isolation
1 x digital input and 1 x digital output, galvanic isolation, 3.5 mm terminal block
MicroSD slot for local logging and extended storage
VPN: OpenVPN, IPsec, WireGuard, ZeroTier, GRE, L2TP, PPTP, DMVPN spoke
Python SDK for edge logic on the router itself
Ships with a 12 V UK mains PSU, runs from any 9 to 48 V DC rail, typical 1.9 W
-40 to +70 degrees C, IP30 metal housing, DIN rail or wall mount
3-year manufacturer warrantySKU: MILESIGHT-UR32-L0GEU-485 - 4G Routers, Milesight, Milesight 4G Routers
Milesight UR32 Pro Series 4G Router with Serial (RS232/RS485), WiFi, 2 x Ethernet, DIO (UR32-L0GEU-W-485)
4G Routers, Milesight, Milesight 4G RoutersMilesight UR32 Pro Series 4G Router with Serial (RS232/RS485), WiFi, 2 x Ethernet, DIO (UR32-L0GEU-W-485)
The Milesight UR32-L0GEU-W-485 is a compact industrial 4G LTE Cat 4 router with dual SIM failover, 2.4 GHz Wi-Fi, and RS485 serial connectivity for direct integration with Modbus instruments and industrial equipment. It runs from 9 to 48 V DC, mounts on a DIN rail or wall, and operates from -40 to +70°C.
Key Features:
• 4G LTE Cat 4 – 150 Mbps down / 50 Mbps up, with automatic 3G/2G fallback
• Dual Mini SIM (2FF) with automatic carrier failover
• 2x RJ45 10/100 Mbps Ethernet – 1x WAN + 1x LAN, configurable as 2x LAN
• 802.11b/g/n Wi-Fi 2.4 GHz – AP and client modes, up to 15 simultaneous connections
• RS232/RS485 serial port (software selectable) – Modbus RTU/TCP gateway, transparent TCP, UDP, MQTT, and DLMS modes
• 1x digital input + 1x digital output, galvanic isolation, SMS and MQTT triggers
• MicroSD slot for local data logging and extended storage
• VPN – OpenVPN, IPsec, WireGuard, ZeroTier, GRE, L2TP, PPTP, DMVPN
• Python SDK for custom edge application development
• Operating temperature -40 to +70°C, IP30, DIN rail and wall mountSKU: MILESIGHT-UR32-L0GEU-W-485 - Milesight, Milesight 4G Routers
Milesight UR35-L0GEU Industrial 4G Router with Serial and I/O
The Milesight UR35 (UR35-L0GEU) is the entry-level UR35 variant: an industrial 4G LTE Cat 4 router with dual SIM failover, RS232 and RS485 serial, and isolated digital I/O. It has no Wi-Fi and no PoE output, which makes it the clean serial and telemetry workhorse of the range in a rugged IP30 metal enclosure for M2M and IoT field sites.
Key Features:
- 4G LTE Cat 4 across EU bands, up to 150 Mbps down and 50 Mbps up, with 3G and 2G fallback
- Dual SIM with automated failover between two carriers, once configured
- 1 x RS232 and 1 x RS485 serial on a 3.5 mm terminal block, 300 to 230400 bps
- 1 isolated digital input and 1 isolated digital output for field signalling
- Five 10/100 Ethernet ports (1 WAN + 4 LAN), 1.5 kV isolation
- NXP ARM Cortex-A7 processor, 128 MB RAM, 128 MB flash, microSD slot
- Modbus RTU to TCP gateway, DLMS/COSEM client, MQTT, SNMP and TR069
- OpenVPN, IPsec, WireGuard, ZeroTier, GRE, L2TP, PPTP and DMVPN
- No Wi-Fi and no PoE on this variant (choose the -W or -P builds for those)
- IP30 metal build, -40 to +70 C, 9 to 48 V DC input
SKU: MILESIGHT-UR35-L0GEU - 4G Routers With POE PSE, Milesight, Milesight 4G Routers
Milesight UR35-L0GEU-P Industrial 4G Router with POE Out
4G Routers With POE PSE, Milesight, Milesight 4G RoutersMilesight UR35-L0GEU-P Industrial 4G Router with POE Out
The Milesight UR35 (UR35-L04EU-P) is an industrial 4G LTE Cat 4 router with dual SIM failover and four 802.3af/at PoE PSE ports. It powers IP cameras, access points, and other PoE devices straight from its LAN ports over a single cable, in a rugged IP30 metal enclosure for M2M and IoT field sites.
Key Features:
– 4G LTE Cat 4 across EU bands, up to 150 Mbps down and 50 Mbps up, with 3G and 2G fallback
– Four 802.3af/at PoE PSE ports on LAN1 to LAN4, 48 V DC input required
– Dual SIM with automated failover between two carriers
– Five 10/100 Ethernet ports (1 WAN + 4 LAN), 1.5 kV isolation
– 1 x RS232 and 1 x RS485 serial on a 3.5 mm terminal block
– 1 isolated digital input and 1 isolated digital output
– NXP ARM Cortex-A7 processor, 128 MB RAM, 128 MB flash, microSD slot
– Modbus RTU to TCP gateway, MQTT, DLMS, SNMP and TR069
– OpenVPN, IPsec, WireGuard, ZeroTier, GRE, L2TP, PPTP and DMVPN
– IP30 metal build, -40 to +70 C, 9 to 48 V DC inputSKU: MILESIGHT-UR35-L0GEU-P - 4G Routers With POE PSE, Milesight, Milesight 4G Routers
Milesight UR35-L0GEU-P-W Industrial 4G Router with Wi-Fi and PoE
4G Routers With POE PSE, Milesight, Milesight 4G RoutersMilesight UR35-L0GEU-P-W Industrial 4G Router with Wi-Fi and PoE
Milesight UR35 Industrial 4G Dual SIM Router with Wi-Fi and PoE (UR35-L0GEU-P-W)
The Milesight UR35-L0GEU-P-W is a rugged industrial 4G LTE Cat 4 router with dual SIM failover, 802.11b/g/n Wi-Fi, and four 802.3af/at PoE output ports for powering connected devices directly from the router. Built on an ARM Cortex-A7 processor with a hardened IP30 metal enclosure, it operates from -40 to +70 °C and supports RS232, RS485, digital I/O, Modbus, DLMS/COSEM, MQTT, and a full VPN suite including WireGuard, OpenVPN, and IPsec.
Key Features:
• 4G LTE Cat 4 with dual Mini SIM (2FF) slots and automatic SIM failover
• 4 x 802.3af/at PoE PSE LAN ports — up to 30 W per port, 60 W total
• 802.11b/g/n Wi-Fi (2.4 GHz) in AP or client mode, up to 15 simultaneous connections
• 5 x Fast Ethernet ports (1 x WAN, 4 x LAN); WAN port configurable as LAN
• RS232 + RS485 serial ports with Modbus RTU/TCP gateway, DLMS/COSEM client
• 1 x digital input and 1 x digital output with galvanic isolation on 3.5 mm terminal block
• VPN support: WireGuard, OpenVPN, IPsec, GRE, L2TP, PPTP, DMVPN, ZeroTier
• Hardware watchdog, VRRP, dual SIM backup, and ping-based failover
• Python SDK embedded for secondary development and custom application logic
• 9-48 V DC input (48 V required for PoE output); -40 to +70 °C operating rangeSKU: MILESIGHT-UR35-L0GEU-P-W-N - Milesight, Milesight 4G Routers
Milesight UR35-L0GEU-W Industrial 4G Router with Wi-Fi
The Milesight UR35 (UR35-L04EU-W) is an industrial 4G LTE Cat 4 router with dual SIM failover and 2.4 GHz Wi-Fi. It combines five Ethernet ports, RS232 and RS485 serial, and isolated digital I/O in a rugged IP30 metal enclosure for M2M and IoT field sites.
Key Features:
– 4G LTE Cat 4 across EU bands, up to 150 Mbps down and 50 Mbps up, with 3G and 2G fallback
– Dual SIM with automated failover between two carriers
– Wi-Fi 802.11 b/g/n at 2.4 GHz, access point or client mode, up to 15 clients
– Five 10/100 Ethernet ports (1 WAN + 4 LAN), 1.5 kV isolation
– 1 x RS232 and 1 x RS485 serial on a 3.5 mm terminal block
– 1 isolated digital input and 1 isolated digital output
– NXP ARM Cortex-A7 processor, 128 MB RAM, 128 MB flash, microSD slot
– Modbus RTU to TCP gateway, MQTT, DLMS, SNMP and TR069
– OpenVPN, IPsec, WireGuard, ZeroTier, GRE, L2TP, PPTP and DMVPN
– IP30 metal build, -40 to +70 C, 9 to 48 V DC inputSKU: MILESIGHT-UR35-L0GEU-W - 5G Routers, Milesight, Milesight 5G Routers
Milesight UR75 Industrial 5G Router with Wi-Fi 6 and GPS
The Milesight UR75-504AE-W2 is an industrial-grade 5G router from the Ultra Series, built for M2M and IoT deployments where high throughput, serial connectivity, and environmental resilience are all required. It pairs a quad-core ARM Cortex-A55 processor with global 5G Sub-6 GHz support, dual SIM failover, Wi-Fi 6, integrated multi-constellation GNSS, and RS232/RS485 serial ports in a compact IP30 metal enclosure rated to -40°C.
UR75-504AE-W2 Key Features:
• 5G Sub-6 GHz NSA/SA with dual carrier aggregation – up to 4.67 Gbps download
• 4G LTE and WCDMA fallback with automatic dual SIM failover
• Dual Mini SIM-2FF slots (1.8V/3V)
• Quad-core ARM Cortex-A55 2 GHz CPU, 1 GB LPDDR4x RAM, 1 GB NAND Flash
• Wi-Fi 6 dual-band: 2.4 GHz 600 Mbps + 5 GHz 1200 Mbps (2×2 MIMO per band)
• 5 x Gigabit Ethernet: 1 x WAN + 4 x LAN
• RS232 + RS485 serial ports with Modbus TCP/RTU gateway support
• GPS/GLONASS/BDS/Galileo/QZSS positioning (2m CEP accuracy)
• 1 x DI + 1 x DO (galvanic isolation) and M.2 NVMe SSD expansion slot
• Node-RED, Milesight DeviceHub remote management, MilesightVPN
• -40°C to +70°C operating range, IP30 metal housing, DIN rail mountable
• 3-year manufacturer warrantyIf you need a 5G Router with POE then please view the Milesight UR75-504AE-P-W2
SKU: MILESIGHT-UR75-504AE-W2 - 5G Routers, Milesight, Milesight 5G Routers
Milesight UR75 Industrial 5G PoE Router with Wi-Fi 6 and GPS (POE Version UR75-504AE-P-W2)
5G Routers, Milesight, Milesight 5G RoutersMilesight UR75 Industrial 5G PoE Router with Wi-Fi 6 and GPS (POE Version UR75-504AE-P-W2)
The Milesight UR75-504AE-P-W2 is an industrial 5G router from the Ultra Series with 4-port 802.3 af/at PoE PSE, built for deployments where the router must also power IP cameras, wireless access points, or other PoE-compatible devices over the LAN ports. It combines 5G Sub-6 GHz connectivity, quad-core processing, Wi-Fi 6, integrated GPS, and RS232/RS485 serial ports in a compact IP30 metal enclosure rated to -40°C. A 48V DC power adapter is included.
UR75-504AE-P-W2 Key Features:
• 5G Sub-6 GHz NSA/SA with dual carrier aggregation – up to 4.67 Gbps download
• 4G LTE and WCDMA fallback with automatic dual SIM failover
• Dual Mini SIM-2FF slots (1.8V/3V)
• Quad-core ARM Cortex-A55 2 GHz CPU, 1 GB LPDDR4x RAM, 1 GB NAND Flash
• Wi-Fi 6 dual-band: 2.4 GHz 600 Mbps + 5 GHz 1200 Mbps (2×2 MIMO per band)
• 5 x Gigabit Ethernet: 1 x WAN + 4 x LAN with 802.3 af/at PoE PSE (30W per port, 60W total)
• RS232 + RS485 serial ports with Modbus TCP/RTU gateway support
• GPS/GLONASS/BDS/Galileo/QZSS positioning (2m CEP accuracy)
• 1 x DI + 1 x DO (galvanic isolation) and M.2 NVMe SSD expansion slot
• Node-RED, Milesight DeviceHub remote management, MilesightVPN
• -40°C to +70°C operating range, IP30 metal housing, DIN rail mountable
• 48V power adapter included, 3-year manufacturer warrantyIf you do not require POE then please view the Milesight UR75-504AE-W2
SKU: MILESIGHT-UR75-504AE-P-W2 - 5G Routers, Milesight, Milesight 5G Routers, Office 5G Router, Outdoor 5G Router
Milesight UF51-504AE-W4 5G Outdoor CPE with Wi-Fi 6
5G Routers, Milesight, Milesight 5G Routers, Office 5G Router, Outdoor 5G RouterMilesight UF51-504AE-W4 5G Outdoor CPE with Wi-Fi 6
The Milesight UF51-504AE-W4 is a 5G Sub-6 GHz outdoor CPE with Wi-Fi 6, an IP67-rated polycarbonate and cast aluminium enclosure, and built-in GPS, RS485 serial, and galvanically isolated DI/DO. It combines 5G cellular backhaul with dual-band Wi-Fi 6 local connectivity in a single weatherproof outdoor unit, making it the right choice for deployments where both 5G uplink and on-site wireless access are required.
Milesight UF51-504AE-W4 Key Features:
• 5G NR SA/NSA Sub-6 GHz – bands N1/N3/N5/N7/N8/N20/N28/N38/N40/N41/N77/N78
• Downlink up to 4.67 Gbps with 5G dual carrier aggregation (2CC CA)
• Wi-Fi 6 (802.11ax) dual-band – 2.4 GHz (up to 1200 Mbps) and 5 GHz (up to 2400 Mbps), 4 x 4 MIMO
• Quad-core ARM Cortex-A55, 2 GHz / 1 GB LPDDR4x RAM / 1 GB NAND Flash
• 1 x 10/100/1000/2500 Mbps WAN/LAN port + 1 x 10/100/1000 Mbps LAN port
• 802.3at PoE PD on WAN port – single cable power and data
• Built-in GPS/GLONASS/Beidou/Galileo/QZSS with 2 m CEP accuracy
• 1 x RS485 serial port (RS232 hardware optional) with Modbus TCP/RTU support
• 1 x DI + 1 x DO with galvanic isolation
• VPN support: OpenVPN, IPsec, L2TP, PPTP
• Node-RED edge application runtime built in
• IP67 rated – pole, wall, desktop, or bottom screw mounting
• Available without WiFi – see UF51-504AESKU: MILESIGHT-UF51-504AE-W4 - Teltonika, Teltonika 4G Routers
Teltonika RUT901 Industrial 4G LTE Dual SIM Router
The Teltonika RUT901 (RUT901000600) is a compact industrial 4G LTE Cat 4 dual SIM router with four Ethernet ports and RutOS. Successor to the RUT950 and RUT951, it adds dual SIM failover and a full industrial protocol stack in an aluminium DIN-rail enclosure.
Key Features:
• Dual SIM (2x Mini SIM 2FF) with automatic failover – weak signal, data limit, roaming, network denied
• 4G LTE Cat 4 – 150 Mbps download / 50 Mbps upload
• 4x Ethernet (1x WAN, 3x LAN), 10/100 Mbps with auto MDI/MDIX
• Wi-Fi 4 (802.11b/g/n, 2.4 GHz) – up to 100 simultaneous clients, 2x RP-SMA
• 1x Digital Input, 1x Digital Output on 4-pin power connector
• Passive PoE input on LAN1 (Mode B, 9-30 V DC) – not IEEE 802.3af/at compatible
• VPN: OpenVPN, IPsec, WireGuard, ZeroTier, GRE, PPTP, L2TP, Stunnel, DMVPN, SSTP, Tinc
• Modbus TCP, DNP3, MQTT, Data to Server industrial protocol support
• Teltonika RMS remote management and FOTA firmware update
• Operating temperature -40 to +75 °C, IP30, DIN rail or wall mount (kit sold separately)SKU: TELTONIKA-RUT901-N - 4G CCTV, 4G Routers, Teltonika, Teltonika 4G Routers
Teltonika RUT906 4G LTE Industrial Router
The Teltonika RUT906 (RUT906000200) is a 4G LTE Cat 4 industrial router with RS232, RS485, GNSS, and dual SIM. RS232 and RS485 connect legacy serial equipment directly, with GPS, Modbus RTU, BACnet, DNP3, and DLMS all built in.
Key Features:
• Dual SIM (2x Mini SIM 2FF) with auto-failover – weak signal, data limit, roaming, network denied
• 4G LTE Cat 4 – 150 Mbps download / 50 Mbps upload
• RS232 (DB9, RTS/CTS flow control, 300-115200 baud) and RS485 (full and half-duplex, 300-230400 baud)
• GNSS – GPS with NMEA 0183, NTRIP, geofencing, and AVL server support
• 4x Ethernet (1x WAN, 3x LAN), 10/100 Mbps with auto MDI/MDIX
• Wi-Fi 4 (802.11b/g/n, 2.4 GHz) – up to 100 simultaneous clients, 2x RP-SMA
• Analog input (0-24 V / 4-20 mA), isolated digital input, dry contact input, relay output, open collector outputs
• Modbus RTU/TCP, BACnet (RS485/TCP), DNP3, OPC UA, DLMS/COSEM, MQTT industrial protocols
• VPN: OpenVPN, IPsec, WireGuard, ZeroTier, DMVPN, SSTP, L2TP, Stunnel, Tinc, GRE, PPTP
• Operating temperature -40 to +75 °C, IP30, aluminium housing, DIN rail or wall mount (kit sold separately)SKU: TELTONIKA-RUT906-N - 4G Routers, Teltonika, Teltonika 4G Routers
Teltonika RUT981 Global 4G Router
The Teltonika RUT981 is a global 4G Cat 4 industrial router with dual SIM, eSIM, and four Ethernet ports, built for deployments that need worldwide LTE connectivity from a single hardware SKU. Powered by a Telit modem covering 18 LTE bands, it covers Europe, the Americas, Asia-Pacific, and the Middle East with one order code.
Key Features:
• Global 4G LTE Cat 4 via Telit modem – 150 Mbps down / 50 Mbps up
• 18 LTE bands: B1, B2, B3, B4, B5, B7, B8, B9, B12, B13, B14, B18, B19, B20, B25, B26, B28
• Dual physical SIM (Mini SIM 2FF) plus eSIM with Bootstrap provisioning
• WAN failover and load balancing across SIM 1, SIM 2, and eSIM
• 802.11b/g/n Wi-Fi 4 (2.4 GHz), 2×2 MIMO, up to 100 simultaneous clients
• 4x RJ45 (1x WAN, 3x LAN), 10/100 Mbps
• Passive PoE input (9-30 VDC, Mode B) via LAN1 port
• Digital input and digital output on industrial 4-pin power connector
• DIN rail, wall, and flat surface mounting (kit required)
• RutOS with VPN suite, MQTT, Modbus, and Teltonika RMS support
• -40 to +65 degrees C operating range, IP30, aluminium enclosureSKU: TELTONIKA-RUT981-N - 4G Routers, Teltonika, Teltonika 4G Routers
Teltonika RUT986 Global 4G Router
The Teltonika RUT986 is a global 4G LTE Cat 4 industrial router with RS232, RS485, GNSS, comprehensive I/O, and Micro SD storage, built for SCADA, energy, utilities, and industrial IoT deployments requiring serial connectivity alongside cellular. Powered by a Telit modem covering 18 LTE bands worldwide, it replaces regional hardware variants with a single globally-certified unit.
Key Features:
• Global 4G LTE Cat 4 via Telit modem – 150 Mbps down / 50 Mbps up, 3G/2G fallback
• 18 LTE bands: B1, B2, B3, B4, B5, B7, B8, B9, B12, B13, B14, B18, B19, B20, B25, B26, B28
• Dual physical SIM (Mini SIM 2FF) plus eSIM with Bootstrap provisioning (up to 7 eSIM profiles)
• RS232 (DB9) and RS485 full/half duplex serial ports, 300-115200 baud
• GNSS receiver: GPS, GLONASS, BeiDou, Galileo, QZSS – geofencing, NMEA, NTRIP client
• 4 digital/analog inputs and 3 outputs including SPST relay (40V, 4A) and analog 4-20 mA input
• 1x USB-A port, Micro SD slot (up to 2 TB) for local data logging
• Industrial protocols: Modbus, DNP3, OPC UA, BACnet, DLMS/COSEM
• 4x RJ45 (1x WAN, 3x LAN), 10/100 Mbps, passive PoE input via LAN1
• RutOS with VPN suite (OpenVPN, WireGuard, IPsec), VRF, RMS remote management
• -40 to +65 degrees C, IP30, aluminium enclosure, 110 x 50 x 100 mm, 294 gSKU: TELTONIKA-RUT986-N
