No products in the basket.
DLMS router
Showing all 9 results
- Teltonika, Teltonika 4G Routers, Teltonika eSIM Routers
Teltonika RUT286 Global LTE Cat 4 Router
The Teltonika RUT286 (RUT286AAAAA0) is an industrial global LTE Cat 4 router with integrated eSIM, dual Mini SIM slots, RS232 and RS485 serial interfaces, and support for 4G bands across Europe, the Americas, Asia-Pacific, and Africa. Powered by a Telit modem and running RutOS, it combines Modbus TCP/RTU, DNP3, DLMS/COSEM, OPC UA, and BACnet with flexible 9-57 V DC or PoE power input in a compact anodised aluminium enclosure.
Key Features:
• Global LTE Cat 4 via Telit modem – 150 Mbps down / 50 Mbps up, with 3G/2G fallback
• Integrated eSIM (consumer type, up to 7 profiles) plus 2 x Mini SIM (2FF) slots
• RS232 and RS485 on a single 6-pin terminal block with Modbus RTU/TCP, DNP3, DLMS, OPC UA, BACnet
• 9-57 V DC industrial power input plus active 802.3af PoE and passive PoE (16-57 V DC) on LAN port
• 802.11b/g/n Wi-Fi with Access Point and Station modes, up to 50 simultaneous clients
• 1 x WAN + 1 x LAN, 10/100 Mbps Ethernet (WAN configurable as LAN)
• Micro SD slot supporting up to 2 TB (FAT32, NTFS, ext2/3/4)
• Full RutOS VPN suite: OpenVPN, IPsec, WireGuard, ZeroTier, GRE, DMVPN, L2TP, Stunnel, SSTP, Tinc
• Teltonika RMS remote management and FOTA support
• Operating temperature -40 to +65 °C, IP30, anodised aluminium housing, 132 gSKU: TELTONIKA-RUT286-N - IoT 4G Gateway, Milesight, Milesight 4G Routers
Milesight UR41 4G Cat 4 Mini Industrial Router with GPS
IoT 4G Gateway, Milesight, Milesight 4G RoutersMilesight UR41 4G Cat 4 Mini Industrial Router with GPS
The Milesight UR41 (UR41-L08EU) is a compact 4G LTE Cat 4 industrial router built for embedded IoT deployments where space, power budget, and serial device connectivity all matter. At 70 x 55 x 22 mm and 103 g, it combines RS232/RS485, digital I/O, GPS/GNSS, and a hardware watchdog in a metal IP30 enclosure rated to -40 to +60 °C.
Key Features:
• 4G LTE Cat 4 – up to 150 Mbps down / 50 Mbps up, with 3G/2G fallback
• GPS/GNSS – GPS, GLONASS, BeiDou, Galileo, QZSS, 2.5 m CEP accuracy
• RS232 or RS485 (software switchable) – Modbus RTU/TCP, transparent serial, DLMS client
• 1 x digital input + 1 x digital output, galvanically isolated, 3.5 mm terminal block
• Dual power input: 5-24 V DC terminal block or 5 V USB Type-C
• Power-saving standby and idle modes – 6.3 mA standby at 12 V
• Hardware watchdog for automatic recovery from cellular or system failures
• VPN support: IPsec, OpenVPN, WireGuard, GRE, L2TP, PPTP, DMVPN, ZeroTier
• Remote management via Milesight Development Platform and MilesightVPN
• Desk, wall, and DIN rail mounting – 70 x 55 x 22 mm, 103 gSKU: MILESIGHT-UR41-L08EU-N - Milesight, Milesight 4G Routers
Milesight UR41L 4G Cat 1 Mini Industrial Router
The Milesight UR41L (UR41L-L0CEU) is a compact 4G LTE Cat 1 industrial router built for cost-sensitive M2M and IoT deployments where low power consumption and serial device connectivity matter more than peak throughput. At 70 x 55 x 22 mm and 103 g, it combines RS232/RS485, galvanically isolated digital I/O, and a hardware watchdog in a metal IP30 enclosure rated to -40 to +60 °C.
Key Features:
• 4G LTE Cat 1 connectivity for low-throughput M2M and IoT applications
• RS232 or RS485 (software switchable) – Modbus RTU/TCP, transparent serial, DLMS client
• 1 x digital input + 1 x digital output, galvanically isolated, 3.5 mm terminal block
• Dual power input: 5-24 V DC terminal block or 5 V USB Type-C
• Ultra-low standby power: 6.3 mA at 12 V – suitable for battery and solar-powered installs
• Hardware watchdog for automatic recovery from cellular or system failures
• VPN support: IPsec, OpenVPN, WireGuard, GRE, L2TP, PPTP, DMVPN, ZeroTier
• Remote management via Milesight DeviceHub and MilesightVPN
• Scheduled wake, SMS wake, and DI wake for power-managed deployments
• Desk, wall, and DIN rail mounting – 70 x 55 x 22 mm, 103 gSKU: MILESIGHT-UR41L-L0CEU - 4G Routers, Milesight, Milesight 4G Routers
Milesight UR32 Pro Series 4G Router with Serial (RS232/RS485), 2 x Ethernet, DIO (UR32-L0GEU-485)
4G Routers, Milesight, Milesight 4G RoutersMilesight UR32 Pro Series 4G Router with Serial (RS232/RS485), 2 x Ethernet, DIO (UR32-L0GEU-485)
The Milesight UR32-L0GEU-485 is the entry point to the UR32 Pro Series: a compact industrial 4G LTE Cat 4 router with dual SIM failover, a software-selectable RS232/RS485 serial port, two Ethernet ports and galvanically isolated digital I/O. It carries no Wi-Fi radio, no GPS and no PoE PSE output, which makes it the right specification for panel-mounted telemetry where the only requirements are cellular backhaul and serial equipment integration.
Key Features:
4G LTE Cat 4 – 150 Mbps down / 50 Mbps up, with 3G and 2G fallback
Dual Mini SIM (2FF), 1.8 V / 3 V, with automatic carrier failover
1 x RS232/RS485 serial port, software selectable in the web UI
Modbus RTU to Modbus TCP gateway, plus transparent TCP, UDP, MQTT and DLMS client modes
2 x RJ45 10/100 Mbps Ethernet, 1 x WAN + 1 x LAN or 2 x LAN, 1.5 kV isolation
1 x digital input and 1 x digital output, galvanic isolation, 3.5 mm terminal block
MicroSD slot for local logging and extended storage
VPN: OpenVPN, IPsec, WireGuard, ZeroTier, GRE, L2TP, PPTP, DMVPN spoke
Python SDK for edge logic on the router itself
Ships with a 12 V UK mains PSU, runs from any 9 to 48 V DC rail, typical 1.9 W
-40 to +70 degrees C, IP30 metal housing, DIN rail or wall mount
3-year manufacturer warrantySKU: MILESIGHT-UR32-L0GEU-485 - Milesight, Milesight 4G Routers
Milesight UR35-L0GEU Industrial 4G Router with Serial and I/O
The Milesight UR35 (UR35-L0GEU) is the entry-level UR35 variant: an industrial 4G LTE Cat 4 router with dual SIM failover, RS232 and RS485 serial, and isolated digital I/O. It has no Wi-Fi and no PoE output, which makes it the clean serial and telemetry workhorse of the range in a rugged IP30 metal enclosure for M2M and IoT field sites.
Key Features:
- 4G LTE Cat 4 across EU bands, up to 150 Mbps down and 50 Mbps up, with 3G and 2G fallback
- Dual SIM with automated failover between two carriers, once configured
- 1 x RS232 and 1 x RS485 serial on a 3.5 mm terminal block, 300 to 230400 bps
- 1 isolated digital input and 1 isolated digital output for field signalling
- Five 10/100 Ethernet ports (1 WAN + 4 LAN), 1.5 kV isolation
- NXP ARM Cortex-A7 processor, 128 MB RAM, 128 MB flash, microSD slot
- Modbus RTU to TCP gateway, DLMS/COSEM client, MQTT, SNMP and TR069
- OpenVPN, IPsec, WireGuard, ZeroTier, GRE, L2TP, PPTP and DMVPN
- No Wi-Fi and no PoE on this variant (choose the -W or -P builds for those)
- IP30 metal build, -40 to +70 C, 9 to 48 V DC input
SKU: MILESIGHT-UR35-L0GEU - 4G Routers With POE PSE, Milesight, Milesight 4G Routers
Milesight UR35-L0GEU-P Industrial 4G Router with POE Out
4G Routers With POE PSE, Milesight, Milesight 4G RoutersMilesight UR35-L0GEU-P Industrial 4G Router with POE Out
The Milesight UR35 (UR35-L04EU-P) is an industrial 4G LTE Cat 4 router with dual SIM failover and four 802.3af/at PoE PSE ports. It powers IP cameras, access points, and other PoE devices straight from its LAN ports over a single cable, in a rugged IP30 metal enclosure for M2M and IoT field sites.
Key Features:
– 4G LTE Cat 4 across EU bands, up to 150 Mbps down and 50 Mbps up, with 3G and 2G fallback
– Four 802.3af/at PoE PSE ports on LAN1 to LAN4, 48 V DC input required
– Dual SIM with automated failover between two carriers
– Five 10/100 Ethernet ports (1 WAN + 4 LAN), 1.5 kV isolation
– 1 x RS232 and 1 x RS485 serial on a 3.5 mm terminal block
– 1 isolated digital input and 1 isolated digital output
– NXP ARM Cortex-A7 processor, 128 MB RAM, 128 MB flash, microSD slot
– Modbus RTU to TCP gateway, MQTT, DLMS, SNMP and TR069
– OpenVPN, IPsec, WireGuard, ZeroTier, GRE, L2TP, PPTP and DMVPN
– IP30 metal build, -40 to +70 C, 9 to 48 V DC inputSKU: MILESIGHT-UR35-L0GEU-P - 4G Routers With POE PSE, Milesight, Milesight 4G Routers
Milesight UR35-L0GEU-P-W Industrial 4G Router with Wi-Fi and PoE
4G Routers With POE PSE, Milesight, Milesight 4G RoutersMilesight UR35-L0GEU-P-W Industrial 4G Router with Wi-Fi and PoE
Milesight UR35 Industrial 4G Dual SIM Router with Wi-Fi and PoE (UR35-L0GEU-P-W)
The Milesight UR35-L0GEU-P-W is a rugged industrial 4G LTE Cat 4 router with dual SIM failover, 802.11b/g/n Wi-Fi, and four 802.3af/at PoE output ports for powering connected devices directly from the router. Built on an ARM Cortex-A7 processor with a hardened IP30 metal enclosure, it operates from -40 to +70 °C and supports RS232, RS485, digital I/O, Modbus, DLMS/COSEM, MQTT, and a full VPN suite including WireGuard, OpenVPN, and IPsec.
Key Features:
• 4G LTE Cat 4 with dual Mini SIM (2FF) slots and automatic SIM failover
• 4 x 802.3af/at PoE PSE LAN ports — up to 30 W per port, 60 W total
• 802.11b/g/n Wi-Fi (2.4 GHz) in AP or client mode, up to 15 simultaneous connections
• 5 x Fast Ethernet ports (1 x WAN, 4 x LAN); WAN port configurable as LAN
• RS232 + RS485 serial ports with Modbus RTU/TCP gateway, DLMS/COSEM client
• 1 x digital input and 1 x digital output with galvanic isolation on 3.5 mm terminal block
• VPN support: WireGuard, OpenVPN, IPsec, GRE, L2TP, PPTP, DMVPN, ZeroTier
• Hardware watchdog, VRRP, dual SIM backup, and ping-based failover
• Python SDK embedded for secondary development and custom application logic
• 9-48 V DC input (48 V required for PoE output); -40 to +70 °C operating rangeSKU: MILESIGHT-UR35-L0GEU-P-W-N - Milesight, Milesight 4G Routers
Milesight UR35-L0GEU-W Industrial 4G Router with Wi-Fi
The Milesight UR35 (UR35-L04EU-W) is an industrial 4G LTE Cat 4 router with dual SIM failover and 2.4 GHz Wi-Fi. It combines five Ethernet ports, RS232 and RS485 serial, and isolated digital I/O in a rugged IP30 metal enclosure for M2M and IoT field sites.
Key Features:
– 4G LTE Cat 4 across EU bands, up to 150 Mbps down and 50 Mbps up, with 3G and 2G fallback
– Dual SIM with automated failover between two carriers
– Wi-Fi 802.11 b/g/n at 2.4 GHz, access point or client mode, up to 15 clients
– Five 10/100 Ethernet ports (1 WAN + 4 LAN), 1.5 kV isolation
– 1 x RS232 and 1 x RS485 serial on a 3.5 mm terminal block
– 1 isolated digital input and 1 isolated digital output
– NXP ARM Cortex-A7 processor, 128 MB RAM, 128 MB flash, microSD slot
– Modbus RTU to TCP gateway, MQTT, DLMS, SNMP and TR069
– OpenVPN, IPsec, WireGuard, ZeroTier, GRE, L2TP, PPTP and DMVPN
– IP30 metal build, -40 to +70 C, 9 to 48 V DC inputSKU: MILESIGHT-UR35-L0GEU-W - 4G CCTV, 4G Routers, Teltonika, Teltonika 4G Routers
Teltonika RUT906 4G LTE Industrial Router
The Teltonika RUT906 (RUT906000200) is a 4G LTE Cat 4 industrial router with RS232, RS485, GNSS, and dual SIM. RS232 and RS485 connect legacy serial equipment directly, with GPS, Modbus RTU, BACnet, DNP3, and DLMS all built in.
Key Features:
• Dual SIM (2x Mini SIM 2FF) with auto-failover – weak signal, data limit, roaming, network denied
• 4G LTE Cat 4 – 150 Mbps download / 50 Mbps upload
• RS232 (DB9, RTS/CTS flow control, 300-115200 baud) and RS485 (full and half-duplex, 300-230400 baud)
• GNSS – GPS with NMEA 0183, NTRIP, geofencing, and AVL server support
• 4x Ethernet (1x WAN, 3x LAN), 10/100 Mbps with auto MDI/MDIX
• Wi-Fi 4 (802.11b/g/n, 2.4 GHz) – up to 100 simultaneous clients, 2x RP-SMA
• Analog input (0-24 V / 4-20 mA), isolated digital input, dry contact input, relay output, open collector outputs
• Modbus RTU/TCP, BACnet (RS485/TCP), DNP3, OPC UA, DLMS/COSEM, MQTT industrial protocols
• VPN: OpenVPN, IPsec, WireGuard, ZeroTier, DMVPN, SSTP, L2TP, Stunnel, Tinc, GRE, PPTP
• Operating temperature -40 to +75 °C, IP30, aluminium housing, DIN rail or wall mount (kit sold separately)SKU: TELTONIKA-RUT906-N
