No products in the basket.
Test
[rev_slider slidertitle=”Home Default” alias=”home-default”]
5G Antennas, QuWireless
QuWireless AM30C QuCube Outdoor 5G Antenna Enclosure for Teltonika RUTM30 RUTM20 TRB501
5G Antennas, QuWireless
QuWireless AM30C QuCube Outdoor 5G Antenna Enclosure for Teltonika RUTM30 RUTM20 TRB501
The QuWireless AM30C QuCube is an all-in-one outdoor antenna enclosure for the Teltonika RUTM20, RUTM30, RUTM31, and TRB501. The router mounts inside a compact IP68-sealed housing alongside integrated multi-band 5G/LTE and Wi-Fi 6E omnidirectional antennas, removing external cable runs and delivering a single weatherproof unit for rapid outdoor 5G deployment.
Key Features:
• Integrated multi-band 5G/LTE omni antenna covering 617-960 MHz, 1.7-2.7 GHz, and 3.3-6.0 GHz
• 5G/LTE gain: 2 dBi (617-960 MHz), 3 dBi (1.7-2.7 GHz), 4 dBi (3.3-6.0 GHz)
• Supports 5G NR bands n77, n78, n79, n28, n1, n3, n20 and the full LTE band set
• Embedded omnidirectional Wi-Fi 6E antenna covering 2.4 GHz, 5 GHz, and 6 GHz
• VSWR <1.20, max <2.50
• IP68 weatherproof rating
• Operating temperature -40 to +80 degrees C
• Compatible with Teltonika RUTM20, RUTM30, RUTM31, TRB501
• Compact cube form factor for urban and mobile 5G installations
• Made in Europe
SKU: QuWireless-QuSpot-WI-AM30C-N
4G Antennas, IoT Antennas, QuWireless
QuWireless A240C QuCube for Teltonika RUT2XX
The QuWireless A240C QuCube is an all-in-one outdoor antenna enclosure for the Teltonika RUT200, RUT230, RUT240, RUT241, RUT260, and RUT281. The router mounts inside a compact IP68-sealed housing alongside integrated multi-band 5G/LTE and Wi-Fi 6E omnidirectional antennas, removing external cable runs and delivering a single weatherproof unit for wall or mast installation.
Key Features:
• Integrated multi-band 5G/LTE omni antenna covering 617-960 MHz, 1.7-2.7 GHz, and 3.3-6.0 GHz
• 5G/LTE gain: 2 dBi (617-960 MHz), 3 dBi (1.7-2.7 GHz), 4 dBi (3.3-6.0 GHz)
• Supported 5G NR bands include n77, n78, n79, n28, n1, n3 and many more
• Embedded omnidirectional Wi-Fi 6E antenna covering 2.4 GHz, 5 GHz, and 6 GHz
• VSWR <1.20, max <2.50
• IP68 weatherproof and dustproof rating
• Operating temperature -40 to +80 degrees C
• Compatible with Teltonika RUT200, RUT230, RUT240, RUT241, RUT260, RUT281
• Compact cube form factor – minimal footprint for urban and mobile installations
• Made in Europe
SKU: QuWireless-QuSpot-WI-A240C-N
4G Antennas, IoT Antennas, QuWireless
QuWireless A240S QuSpot Outdoor Antenna Enclosure for Teltonika RUT241 RUT200 RUT281
4G Antennas, IoT Antennas, QuWireless
QuWireless A240S QuSpot Outdoor Antenna Enclosure for Teltonika RUT241 RUT200 RUT281
The QuWireless A240S QuSpot is an all-in-one outdoor antenna enclosure for the Teltonika RUT200, RUT230, RUT240, RUT241, RUT260, and RUT281. It houses the router inside the sealed unit alongside integrated multi-band LTE and Wi-Fi omnidirectional antennas, eliminating external cable runs and delivering a weather-hardened installation in a single mount.
Key Features:
• Integrated multi-band LTE omni antenna covering 694-960 MHz, 1.7-2.2 GHz, and 2.2-2.7 GHz
• LTE gain: 2 dBi (sub-1 GHz and mid-band), 4 dBi (2.2-2.7 GHz)
• Embedded omnidirectional Wi-Fi antenna (2.4 GHz and 5 GHz)
• Supports LTE bands 1-41 and extended bands including B28, B66, B71
• IP68 weatherproof rating – suitable for permanent outdoor installation
• IK08 impact resistance rating
• Operating temperature -40 to +80 degrees C
• Wall or mast mounting – hardware included
• Compatible with Teltonika RUT200, RUT230, RUT240, RUT241, RUT260, RUT281
• Made in Europe
SKU: QuWireless-QuSpot-WI-A240S-N
QuWireless
QuWireless AX50S QuSpot Outdoor 5G Enclosure for Teltonika RUTX50
The QuWireless AX50S QuSpot is an IP68-rated outdoor enclosure for the Teltonika RUTX50, RUTM51, RUTM54, and RUTM55, with integrated 5G/LTE, dual-band Wi-Fi, and GPS antennas in a single weatherproof unit. It mounts the router directly inside the antenna housing, eliminating coaxial cable runs between modem and antenna and maximising signal performance in permanent outdoor installations.
Key Features:
• Compatible with Teltonika RUTX50, RUTM51, RUTM54, and RUTM55 (router sold separately)
• Integrated 5G/LTE omnidirectional antenna: 617 MHz to 6 GHz, up to 4.5 dBi gain
• 4x SMA internal connections for 4×4 MIMO 5G/LTE
• Integrated dual-band Wi-Fi omni antenna: 2.4 GHz and 5 GHz
• Integrated GPS active antenna
• IP68 and IK08 rated – suitable for permanent outdoor and marine installation
• Passive PoE support for single-cable power and data
• Operating temperature: -40 to +80°C
• Pole and wall mount hardware included
• Made in Europe
SKU: QuWireless-QuSpot-WI-AX50S-N
4G Routers, Teltonika, Teltonika 4G Routers
Teltonika RUT986 Global 4G Router
The Teltonika RUT986 is a global 4G LTE Cat 4 industrial router with RS232, RS485, GNSS, comprehensive I/O, and Micro SD storage, built for SCADA, energy, utilities, and industrial IoT deployments requiring serial connectivity alongside cellular. Powered by a Telit modem covering 18 LTE bands worldwide, it replaces regional hardware variants with a single globally-certified unit.
Key Features:
• Global 4G LTE Cat 4 via Telit modem – 150 Mbps down / 50 Mbps up, 3G/2G fallback
• 18 LTE bands: B1, B2, B3, B4, B5, B7, B8, B9, B12, B13, B14, B18, B19, B20, B25, B26, B28
• Dual physical SIM (Mini SIM 2FF) plus eSIM with Bootstrap provisioning (up to 7 eSIM profiles)
• RS232 (DB9) and RS485 full/half duplex serial ports, 300-115200 baud
• GNSS receiver: GPS, GLONASS, BeiDou, Galileo, QZSS – geofencing, NMEA, NTRIP client
• 4 digital/analog inputs and 3 outputs including SPST relay (40V, 4A) and analog 4-20 mA input
• 1x USB-A port, Micro SD slot (up to 2 TB) for local data logging
• Industrial protocols: Modbus, DNP3, OPC UA, BACnet, DLMS/COSEM
• 4x RJ45 (1x WAN, 3x LAN), 10/100 Mbps, passive PoE input via LAN1
• RutOS with VPN suite (OpenVPN, WireGuard, IPsec), VRF, RMS remote management
• -40 to +65 degrees C, IP30, aluminium enclosure, 110 x 50 x 100 mm, 294 g
SKU: TELTONIKA-RUT986-N
4G Routers, Teltonika, Teltonika 4G Routers
Teltonika RUT981 Global 4G Router
The Teltonika RUT981 is a global 4G Cat 4 industrial router with dual SIM, eSIM, and four Ethernet ports, built for deployments that need worldwide LTE connectivity from a single hardware SKU. Powered by a Telit modem covering 18 LTE bands, it covers Europe, the Americas, Asia-Pacific, and the Middle East with one order code.
Key Features:
• Global 4G LTE Cat 4 via Telit modem – 150 Mbps down / 50 Mbps up
• 18 LTE bands: B1, B2, B3, B4, B5, B7, B8, B9, B12, B13, B14, B18, B19, B20, B25, B26, B28
• Dual physical SIM (Mini SIM 2FF) plus eSIM with Bootstrap provisioning
• WAN failover and load balancing across SIM 1, SIM 2, and eSIM
• 802.11b/g/n Wi-Fi 4 (2.4 GHz), 2×2 MIMO, up to 100 simultaneous clients
• 4x RJ45 (1x WAN, 3x LAN), 10/100 Mbps
• Passive PoE input (9-30 VDC, Mode B) via LAN1 port
• Digital input and digital output on industrial 4-pin power connector
• DIN rail, wall, and flat surface mounting (kit required)
• RutOS with VPN suite, MQTT, Modbus, and Teltonika RMS support
• -40 to +65 degrees C operating range, IP30, aluminium enclosure
SKU: TELTONIKA-RUT981-N
5G Antennas, Poynting, Vehicle 5G Antennas
Poynting MIMO-4-19 | 9-in-1 Transportation & Automotive Antenna
5G Antennas, Poynting, Vehicle 5G Antennas
Poynting MIMO-4-19 | 9-in-1 Transportation & Automotive Antenna
Poynting MIMO-4-19
9-in-1 Transportation & Automotive Antenna – 617 – 7200 MHz; 4×4 LTE/5G (MIMO), 6dBi; 4×4 Wi-Fi (MIMO), 6.5dBi; GPS/GLONASS, 21dBi
9-in-1 High performance multi frequency automotive antenna
Ultra-wideband coverage from 617 to 6000 MHz for cellular
4×4 MIMO LTE/5G, 4×4 MIMO Wi-Fi & GPS/GLONASS
Robust and weather resistant antenna with an IP69K rating
Ideal for transportation and marine implementation
Multi mounting options for ease of installation
SKU: n/a
4G Routers, Robustel, Robustel 4G Routers
Robustel R1511e
The Robustel R1511e is a compact industrial 4G LTE router with a fully embedded MFF2 eSIM, covering global LTE bands across 4G, 3G, and 2G networks. It connects Ethernet and RS-232 or RS-485 serial equipment over cellular, with automatic failover, built-in Modbus RTU to TCP conversion, and full remote management via the RCMS cloud platform.
Key Features:
• Global 4G LTE Cat 4 via embedded MFF2 eSIM – LTE FDD B1/2/3/4/5/7/8/12/13/18/19/20/25/26/28/66, LTE TDD B38/39/40/41
• GSMA SGP.22 compliant – up to 6 eSIM profiles with remote provisioning and switching
• 2 x 10/100 Mbps Ethernet – configurable as dual LAN or 1x LAN + 1x WAN
• 1 x RS-232 or RS-485 serial port (hardware configured) with built-in Modbus RTU to TCP gateway
• 2.4 GHz Wi-Fi 802.11 b/g/n – AP and client modes
• IPsec, OpenVPN, GRE, and WireGuard VPN tunnels
• RobustVPN provides a fixed IP address on any eSIM profile
• Automatic failover across 4G, Ethernet, and Wi-Fi
• RCMS cloud platform for remote device monitoring and eSIM profile management
• DIN rail, wall, and desktop mounting – operating range -25 to +70°C
SKU: n/a
4G Routers, Teltonika, Teltonika 4G Routers
Teltonika RUT281 Global 4G Router
The Teltonika RUT281 is the smallest industrial LTE Cat 4 router in the Teltonika range, built for reliable global 4G connectivity in space-constrained fixed installations. A Telit modem covering 18 LTE bands delivers single-SKU worldwide deployment, with eSIM support for remote SIM provisioning without an on-site visit.
Key Features:
• Global 4G LTE Cat 4 via Telit modem – 150 Mbps down / 50 Mbps up
• 18 LTE bands: B1, B2, B3, B4, B5, B7, B8, B9, B12, B13, B14, B18, B19, B20, B25, B26, B28
• 3G UMTS (7 bands) and 2G GSM (4 bands) fallback for full global coverage
• 1 x Physical Mini SIM (2FF) + eSIM with up to 7 downloadable profiles
• 2 x 10/100 Mbps Ethernet (1 WAN + 1 LAN) with passive PoE on LAN port
• 802.11b/g/n Wi-Fi – Access Point and Station modes, up to 50 clients
• 1 x Digital Input, 1 x Digital Output on 4-pin industrial power connector
• 9-30 VDC input, less than 4W consumption – DIN rail and wall mountable
• Operating temperature -40 to +65 degrees C, IP30 aluminium housing, 83 x 25 x 74 mm
• RutOS with Modbus TCP, OPC UA, DNP3, DLMS/COSEM, full VPN suite and Teltonika RMS support
SKU: TELTONIKA-RUT281-N
4G Antennas, 5G Antennas, Panorama 4G Antenna, Panorama Antennas, Vehicle 5G Antennas
Panorama LG-IN2457 5-in-1 MIMO 4G/5G, WiFi and GPS Panel Antenna
4G Antennas, 5G Antennas, Panorama 4G Antenna, Panorama Antennas, Vehicle 5G Antennas
Panorama LG-IN2457 5-in-1 MIMO 4G/5G, WiFi and GPS Panel Antenna
The Panorama LG-IN2457 is a 5-in-1 combination antenna supplied as a complete kit with 5-metre cables. It combines 2×2 MIMO 4G/5G LTE, 2×2 MIMO dual-band WiFi, and an active GPS/GNSS receiver in a single low profile dome. As a result, one installation point replaces five separate antennas on a vehicle roof or equipment panel.
Key Features:
• 5-in-1 combination: 2×2 MIMO 4G/5G LTE + 2×2 MIMO dual-band WiFi + active GPS/GNSS
• Cellular: 617-960 MHz and 1710-6000 MHz – all UK and European LTE bands plus sub-6 GHz 5G NR
• WiFi: 2.4 GHz and 4.9-6.0 GHz dual-band
• GPS/GNSS: 1562-1612 MHz – supports GPS, Glonass, Galileo, QZSS and Compass with 26 dB active LNA
• Cellular gain: 5 dBi (617-960 MHz), 9 dBi (1710-3800 MHz), 10 dBi (4900-6000 MHz)
• Complete cable kit: 5x 5-metre RG174 cables – 2x SMA male (cellular), 2x RP-SMA male (WiFi), 1x SMA male (GPS)
• Single hole panel mount – conductive and non-conductive surfaces, no ground plane required
• IP69K waterproof and pressure-wash rated – IK10 vandal resistant
• Halogen-free flame retardant radome and cables – UNECE 118.01 and EN45545-2 compliant
• Operating temperature -40°C to +85°C – available in black (LG-IN2457) or white (LG-IN2457-W)
SKU: n/a
We supply a wide range of IoT Devices for BMS, automation, and connectivity projects. From simple solutions to large scale commercial projects, we will support you with free technical support, rapid shipping and effortless solution crafting to bring you real results.
For trade quotes, product advice, or large orders, our team is always available to help you out: