QuWireless AM30C QuCube Outdoor 5G Antenna Enclosure for Teltonika RUTM30 RUTM20 TRB501

QuWireless AM30C QuCube – Outdoor 5G Antenna Enclosure for Teltonika RUTM30 and RUTM Series

The QuWireless AM30C QuCube is a compact, sealed outdoor enclosure that houses the Teltonika RUTM20, RUTM30, RUTM31, or TRB501 alongside integrated 5G/LTE and Wi-Fi 6E omnidirectional antennas. The router connects directly to the internal antenna elements with no external SMA cables and no coax loss. The RUTM30 and TRB501 are native 5G devices, and the AM30C antenna covers the full 5G NR band set including n77 and n78 – the primary mid-band 5G frequencies used by UK operators. The result is a single weatherproof unit delivering genuine outdoor 5G connectivity from one wall or mast-mounted installation.

The 5G/LTE antenna spans 617 MHz to 6.0 GHz with gain up to 4 dBi at the higher frequencies, covering sub-1 GHz bands for rural reach and n77/n78 for urban 5G throughput. The Wi-Fi 6E antenna covers 2.4 GHz, 5 GHz, and 6 GHz. The enclosure is IP68 rated, tested from -40 to +80 degrees C, and manufactured in Europe by QuWireless. The cube form factor minimises the installation footprint for urban poles, vehicle roofs, and transport infrastructure.

Key Features

• All-in-one outdoor enclosure – router, 5G/LTE antenna, and Wi-Fi 6E antenna in a single sealed unit
• 5G/LTE omni antenna: 617-960 MHz, 1.7-2.7 GHz, 3.3-6.0 GHz
• 5G/LTE gain: 2 dBi (617-960 MHz), 3 dBi (1.7-2.7 GHz), 4 dBi (3.3-6.0 GHz)
• Supports 5G NR bands including n77, n78, n79, n28, n1, n3, n20 and more
• Full LTE band coverage from B1 to B106
• Embedded omnidirectional Wi-Fi 6E antenna: 2.4 GHz, 5 GHz, 6 GHz
• VSWR <1.20, max <2.50
• IP68 rated – fully weatherproof for permanent outdoor use
• Operating temperature -40 to +80°C
• Compatible with Teltonika RUTM20, RUTM30, RUTM31, TRB501

Where the AM30C QuCube is Used

Outdoor 5G Connectivity for High-Bandwidth Applications

The RUTM30 delivers 5G Sub-6 GHz throughput and the AM30C antenna covers n77 and n78 – the bands used by EE, Vodafone, and Three for UK 5G mid-band services. Combined in the QuCube enclosure, this gives a single outdoor unit capable of multi-hundred Mbps cellular uplinks for video surveillance, real-time data aggregation, and high-density IoT backhaul. There are no external cable joints to weather, and no separate antenna enclosure to source and install.

Public Transport and Fleet Connectivity

The compact cube form factor and IP68 sealing suit roof or bulkhead mounting on buses, trains, and commercial vehicles. QuWireless specifically positions the QuCube for transport deployments. The RUTM30 inside the AM30C provides passenger and operational 5G connectivity, while the Wi-Fi 6E antenna supports onboard client access. The -40 to +80 degrees C range handles both winter exposure and solar-heated vehicle roof temperatures.

Urban Infrastructure and Smart City Poles

Lamp posts, CCTV poles, and street-level IoT infrastructure benefit from the low-profile cube enclosure. A single unit replaces a router cabinet, external antenna, and weatherproof housing. The 5G antenna covers the full sub-1 GHz through 6 GHz range in one element, and the Wi-Fi 6E element supports local mesh or access point functionality via the RUTM30.

Industrial IoT Gateways and TRB501 Deployments

The TRB501 is a compact 5G IoT gateway with serial and digital I/O interfaces for connecting industrial equipment to cellular networks. Installed inside the AM30C, the TRB501 gains outdoor mounting and a matched 5G antenna without the need for separate weatherproofing. This suits remote substations, pipeline monitoring outstations, and field-deployed sensor nodes where an IP68 enclosure is required but installation space is limited.

Underground and Difficult RF Environments

The omnidirectional antenna covers low-band 5G from 617 MHz – frequencies that provide better propagation through structures and in tunnelled environments than mid-band 5G. For underground transport systems or building-penetration scenarios where a directional antenna is impractical, the AM30C provides coverage from a compact, pole-mounted unit.

Frequently Asked Questions

Which Teltonika devices are compatible with the AM30C QuCube?

The AM30C is compatible with the Teltonika RUTM20, RUTM30, RUTM31, and TRB501. The RUTM30 and TRB501 are 5G-capable devices. The RUTM20 is a 4G LTE router from the Teltonika router range. All four devices mount inside the AM30C enclosure and connect directly to the internal antenna elements.

Does the AM30C deliver genuine 5G performance?

Yes. Unlike QuWireless enclosures designed for the RUT2xx series – which are 4G-only devices – the AM30C is paired with the RUTM30 and TRB501, both of which are native 5G hardware. The antenna covers 5G NR bands n77, n78, and n79 (the primary UK 5G mid-band frequencies) as well as the full sub-1 GHz 5G band set. When installed with the RUTM30, the AM30C delivers an outdoor 5G solution with no external cables or antenna connectors exposed to the elements.

What is the difference between the AM30C and the A240C QuCube?

The antenna spec and enclosure are identical – both use the same QuCube housing with 617 MHz to 6.0 GHz 5G/LTE coverage and Wi-Fi 6E. The difference is the compatible router. The A240C is designed for the Teltonika RUT2xx series (4G LTE routers). The AM30C is designed for the RUTM20, RUTM30, RUTM31, and TRB501 – which includes genuine 5G hardware. If you are deploying a RUTM30 or TRB501, the AM30C is the correct enclosure.

What SIM card does the RUTM30 need in the AM30C?

The RUTM30 takes a Nano SIM. For fixed 5G installations – backhaul, remote monitoring, or CCTV – a fixed IP SIM card gives the router a stable, addressable IP for remote access and VPN connections. For mobile or multi-network deployments, a roaming SIM covering multiple UK operators is more practical. Check that your chosen SIM supports 5G data on n77 or n78 for full RUTM30 performance.

Can the RUTM30 inside the AM30C be managed remotely?

Yes. The RUTM30 supports Teltonika RMS, the cloud-based remote management platform. RMS allows monitoring, configuration, and firmware updates across multiple devices from a single interface without requiring a VPN to each device. See our guide to Teltonika RMS for how it works and what licence options are available.

Is the AM30C suitable for vehicle roof mounting?

Yes. The compact cube form factor and IP68 rating make it suitable for roof mounting on buses, vans, and commercial vehicles. The operating temperature range of -40 to +80 degrees C handles both cold-weather exposure and the elevated temperatures of a sun-exposed vehicle roof. Confirm mounting hardware and bracket options with the datasheet or contact us before ordering for a vehicle application.

Related Products and Further Reading

The AM30C pairs with the Teltonika RUTM30, RUTM20, RUTM31, and TRB501. For the full range of Teltonika 5G routers including the RUTM series, see our Teltonika 5G router range. For fixed 5G deployments requiring a stable IP address, see our fixed IP SIM cards. If your application uses a Teltonika RUT2xx router rather than the RUTM series, the QuWireless A240C QuCube is the equivalent enclosure for that hardware. For remote site management across multiple RUTM30 installations, see our guide to Teltonika RMS.