No products in the basket.
RMS router
Showing all 5 results
- 5G Routers, Edge Computing, Teltonika, Teltonika 5G Routers
Teltonika RUTC54 Global 5G Edge Router
The Teltonika RUTC54 is a global 5G edge router for centrally managed industrial and distributed networks. It runs Docker on the device, pairs dual SIM with integrated eSIM for carrier failover, and delivers Wi-Fi 6 alongside global 5G on a Telit modem.
Key features:
Global 5G Sub-6 GHz on a Telit modem, up to 3.4 Gbps down (4×4 MIMO) and 900 Mbps up (2×2 MIMO)
4G LTE Cat 19 fallback, up to 1.6 Gbps down and 211 Mbps up
Docker container support for edge applications on the router itself
Dual-band Wi-Fi 6 (802.11ax), up to 2402 Mbps on 5 GHz, MU-MIMO, up to 512 clients
Dual SIM plus integrated eSIM with configurable auto-failover
5 x Gigabit Ethernet, 1 x WAN (configurable as LAN) and 4 x LAN
Dual-core Arm Cortex-A53 at 1.3 GHz, 1 GB DDR4 RAM, 8 GB eMMC flash
GNSS positioning: GPS, GLONASS, BeiDou, Galileo and QZSS, with geofencing
RutOS with full VPN suite, RMS remote management and TPM 2.0
Anodised aluminium build, DIN rail or wall mount, -40 to 75 degrees CSKU: TELTONIKA-RUTC54-N - 4G Routers, Teltonika, Teltonika 4G Routers
Teltonika RUT981 Global 4G Router
The Teltonika RUT981 is a global 4G Cat 4 industrial router with dual SIM, eSIM, and four Ethernet ports, built for deployments that need worldwide LTE connectivity from a single hardware SKU. Powered by a Telit modem covering 18 LTE bands, it covers Europe, the Americas, Asia-Pacific, and the Middle East with one order code.
Key Features:
• Global 4G LTE Cat 4 via Telit modem – 150 Mbps down / 50 Mbps up
• 18 LTE bands: B1, B2, B3, B4, B5, B7, B8, B9, B12, B13, B14, B18, B19, B20, B25, B26, B28
• Dual physical SIM (Mini SIM 2FF) plus eSIM with Bootstrap provisioning
• WAN failover and load balancing across SIM 1, SIM 2, and eSIM
• 802.11b/g/n Wi-Fi 4 (2.4 GHz), 2×2 MIMO, up to 100 simultaneous clients
• 4x RJ45 (1x WAN, 3x LAN), 10/100 Mbps
• Passive PoE input (9-30 VDC, Mode B) via LAN1 port
• Digital input and digital output on industrial 4-pin power connector
• DIN rail, wall, and flat surface mounting (kit required)
• RutOS with VPN suite, MQTT, Modbus, and Teltonika RMS support
• -40 to +65 degrees C operating range, IP30, aluminium enclosureSKU: TELTONIKA-RUT981-N - 4G Routers, Teltonika, Teltonika 4G Routers
Teltonika RUT986 Global 4G Router
The Teltonika RUT986 is a global 4G LTE Cat 4 industrial router with RS232, RS485, GNSS, comprehensive I/O, and Micro SD storage, built for SCADA, energy, utilities, and industrial IoT deployments requiring serial connectivity alongside cellular. Powered by a Telit modem covering 18 LTE bands worldwide, it replaces regional hardware variants with a single globally-certified unit.
Key Features:
• Global 4G LTE Cat 4 via Telit modem – 150 Mbps down / 50 Mbps up, 3G/2G fallback
• 18 LTE bands: B1, B2, B3, B4, B5, B7, B8, B9, B12, B13, B14, B18, B19, B20, B25, B26, B28
• Dual physical SIM (Mini SIM 2FF) plus eSIM with Bootstrap provisioning (up to 7 eSIM profiles)
• RS232 (DB9) and RS485 full/half duplex serial ports, 300-115200 baud
• GNSS receiver: GPS, GLONASS, BeiDou, Galileo, QZSS – geofencing, NMEA, NTRIP client
• 4 digital/analog inputs and 3 outputs including SPST relay (40V, 4A) and analog 4-20 mA input
• 1x USB-A port, Micro SD slot (up to 2 TB) for local data logging
• Industrial protocols: Modbus, DNP3, OPC UA, BACnet, DLMS/COSEM
• 4x RJ45 (1x WAN, 3x LAN), 10/100 Mbps, passive PoE input via LAN1
• RutOS with VPN suite (OpenVPN, WireGuard, IPsec), VRF, RMS remote management
• -40 to +65 degrees C, IP30, aluminium enclosure, 110 x 50 x 100 mm, 294 gSKU: TELTONIKA-RUT986-N - 4G Routers, Edge Computing, Teltonika, Teltonika 4G Routers
Teltonika RUTC40 Global Edge 4G Router
The Teltonika RUTC40 is a global 4G Cat 4 edge router built for demanding industrial and IoT deployments. Powered by a Telit modem with worldwide LTE band support, it combines dual-band Wi-Fi 6, a dual-core 1.3 GHz CPU, 1 GB RAM, and Docker container support in a rugged industrial enclosure. Whether you need primary connectivity, WAN failover, or local edge computing, the RUTC40 delivers.
- Global 4G LTE Cat 4 via Telit modem – up to 150 Mbps down / 50 Mbps up
- Dual-band Wi-Fi 6 (802.11ax) with MU-MIMO, up to 512 simultaneous clients
- Dual-core ARM Cortex-A53 1.3 GHz CPU, 1 GB RAM, 8 GB flash
- Docker support – run containerised applications directly on the router
- 5x Gigabit Ethernet ports (1x WAN, 4x LAN)
- Dual Nano SIM + consumer eSIM with automatic failover
- Industrial operating range: -40 to +75 degrees C, DIN rail mountable
- RutOS with full VPN, firewall, Modbus, MQTT and industrial protocol support
- Teltonika RMS compatible for remote monitoring and fleet management
SKU: TELTONIKA-RUTC40-N - 4G Routers, Edge Computing, Teltonika, Teltonika 4G Routers
Teltonika RUTC42 Dual Modem 4G Edge Router
4G Routers, Edge Computing, Teltonika, Teltonika 4G RoutersTeltonika RUTC42 Dual Modem 4G Edge Router
The Teltonika RUTC42 is a dual modem 4G LTE Cat 4 edge router built for industrial deployments where connectivity failure is not an option. Two independent LTE Cat 4 modules deliver true hardware-level redundancy with simultaneous failover and load balancing, backed by Docker container support, RutOS, and full Teltonika RMS integration for remote management at scale.
Key Features:
• Dual 4G LTE Cat 4 modems – 150 Mbps down / 50 Mbps up per modem
• Independent SIM failover per modem with automatic switching between physical SIM and eSIM
• 2x eSIM (consumer type, up to 7 profiles each) + 2x Nano SIM physical slots
• Dual-band Wi-Fi 6 (802.11ax) – 2.4 GHz and 5 GHz with MU-MIMO
• Dual-core ARM Cortex-A53 1.3 GHz CPU, 1 GB RAM, 8 GB flash
• Docker container support for local application hosting
• 5x Gigabit Ethernet ports with passive PoE input on LAN1
• 9-50 VDC wide-range power input, DIN rail mountable
• RutOS with VPN, Modbus, MQTT, and industrial protocol support
• Teltonika RMS remote management compatible – 2-year manufacturer warrantySKU: TELONIKA-RUTC42-N
