No products in the basket.
poe router
Showing all 9 results
- 4G Routers With POE PSE, Milesight, Milesight 4G Routers
Milesight UR32S Lite Series 4G Router with WiFi, 2 x Ethernet and POE Out (UR32S-L0GEU-P)
4G Routers With POE PSE, Milesight, Milesight 4G RoutersMilesight UR32S Lite Series 4G Router with WiFi, 2 x Ethernet and POE Out (UR32S-L0GEU-P)
The Milesight UR32S-L0GEU-P is a compact Lite Series industrial 4G LTE Cat 4 router with 802.3af/at PoE PSE output on both LAN ports, 2.4 GHz Wi-Fi and automatic failover between a wired WAN and cellular. It powers an IP camera, access point or door reader directly from the router, which removes the injector from the enclosure and leaves one device to install, power and maintain at a remote site.
Key Features:
802.3af/at PoE PSE on both LAN ports, 30 W per port and 60 W total
Ships with the 48 V UK mains PSU that the PoE ports require, no extra supply to buy
4G LTE Cat 4 with 3G and 2G fallback, 150 Mbps down / 50 Mbps up
2.4 GHz 802.11b/g/n Wi-Fi, AP mode or client mode
Automatic failover and failback between Ethernet WAN and cellular
1 x Mini SIM (2FF) slot, 1.8 V / 3 V
2 x RJ45 10/100 Mbps Ethernet, 1.5 kV isolation
1 x SMA cellular antenna connector and 1 x RP-SMA Wi-Fi antenna connector
VPN: IPsec, OpenVPN, GRE, L2TP, PPTP and DMVPN
MilesightVPN and M-Sight Pro app support for remote camera and NVR access
Remote management through the Milesight Development Platform and DeviceHub
-40 to +70 degrees C, IP30 metal housing, DIN rail, wall or desktop mountSKU: MILESIGHT-UR32S-L0GEU-P - Teltonika, Teltonika 4G Routers, Teltonika eSIM Routers
Teltonika RUT286 Global LTE Cat 4 Router
The Teltonika RUT286 (RUT286AAAAA0) is an industrial global LTE Cat 4 router with integrated eSIM, dual Mini SIM slots, RS232 and RS485 serial interfaces, and support for 4G bands across Europe, the Americas, Asia-Pacific, and Africa. Powered by a Telit modem and running RutOS, it combines Modbus TCP/RTU, DNP3, DLMS/COSEM, OPC UA, and BACnet with flexible 9-57 V DC or PoE power input in a compact anodised aluminium enclosure.
Key Features:
• Global LTE Cat 4 via Telit modem – 150 Mbps down / 50 Mbps up, with 3G/2G fallback
• Integrated eSIM (consumer type, up to 7 profiles) plus 2 x Mini SIM (2FF) slots
• RS232 and RS485 on a single 6-pin terminal block with Modbus RTU/TCP, DNP3, DLMS, OPC UA, BACnet
• 9-57 V DC industrial power input plus active 802.3af PoE and passive PoE (16-57 V DC) on LAN port
• 802.11b/g/n Wi-Fi with Access Point and Station modes, up to 50 simultaneous clients
• 1 x WAN + 1 x LAN, 10/100 Mbps Ethernet (WAN configurable as LAN)
• Micro SD slot supporting up to 2 TB (FAT32, NTFS, ext2/3/4)
• Full RutOS VPN suite: OpenVPN, IPsec, WireGuard, ZeroTier, GRE, DMVPN, L2TP, Stunnel, SSTP, Tinc
• Teltonika RMS remote management and FOTA support
• Operating temperature -40 to +65 °C, IP30, anodised aluminium housing, 132 gSKU: TELTONIKA-RUT286-N - 4G CCTV, 4G Routers, 4G Routers With POE PSE, Milesight, Milesight 4G Routers
Milesight UR32L-L0GEU-P 4G Router with PoE
4G CCTV, 4G Routers, 4G Routers With POE PSE, Milesight, Milesight 4G RoutersMilesight UR32L-L0GEU-P 4G Router with PoE
The Milesight UR32L Lite with POE (UR32L-L0GEU-P) is a compact industrial 4G LTE Cat 4 router with 802.3af/at PoE PSE output on both LAN ports, combining cellular WAN and the ability to power IP cameras or other PoE devices directly from a single unit. It carries a full VPN stack, supports remote fleet management via the Milesight Development Platform, and draws 1.8 W in normal operation – rising when PoE devices are connected.
Key Features:
• 4G LTE Cat 4 – 150 Mbps down / 50 Mbps up, with 3G/2G fallback
• Single Mini SIM (2FF), 1.8 V / 3 V
• 2x RJ45 10/100 Mbps Ethernet – 1x WAN + 1x LAN, configurable as 2x LAN
• 802.3af/at PoE PSE on both LAN ports – up to 30 W per port, 60 W total (48 V DC input required)
• Automatic WAN failover from Ethernet to cellular on link loss
• VPN – OpenVPN, IPsec, WireGuard, ZeroTier, GRE, L2TP (client), PPTP (client), DMVPN (spoke)
• Remote management via DeviceHub and Milesight Development Platform
• SNMP v1/v2c/v3, TR-069, SMS management and on-demand dial-up
• Hardware watchdog with automatic recovery
• Operating temperature -40 to +70°C, IP30, DIN rail and wall mount, 3-year warrantySKU: MILESIGHT-UR32L-L0GEU-P - 4G CCTV, 4G Routers With POE PSE, Milesight, Milesight 4G Routers
Milesight UR32 Pro Series 4G Router with POE Out, Serial (RS232/RS485), WiFi, 2 x Ethernet, DIO (UR32-L0GEU-P-W-485)
4G CCTV, 4G Routers With POE PSE, Milesight, Milesight 4G RoutersMilesight UR32 Pro Series 4G Router with POE Out, Serial (RS232/RS485), WiFi, 2 x Ethernet, DIO (UR32-L0GEU-P-W-485)
The Milesight UR32-L0GEU-P-W-485 is a compact industrial 4G LTE Cat 4 router with dual SIM, built-in 802.3af/at PoE PSE output, 2.4 GHz Wi-Fi, and RS485 serial connectivity for industrial equipment integration. It delivers 4G cellular backhaul and can power IP cameras or other PoE devices directly from the same unit, removing the need for a separate injector on remote installations.
Key Features:
• 4G LTE Cat 4 – 150 Mbps down / 50 Mbps up, with 3G/2G fallback
• Dual Mini SIM (2FF) with automatic carrier failover
• 802.3af/at PoE PSE on both LAN ports – up to 30 W per port, 60 W total (48 V DC input required)
• 802.11b/g/n Wi-Fi 2.4 GHz – AP and client modes, up to 15 simultaneous connections
• RS485 serial port with Modbus RTU/TCP gateway and transparent TCP/MQTT modes
• 1x digital input + 1x digital output, galvanic isolation
• MicroSD slot for local data logging and extended storage
• VPN support – OpenVPN, IPsec, WireGuard, ZeroTier, GRE, L2TP, PPTP, DMVPN
• Python SDK for custom application and edge logic development
• Operating temperature -40 to +70°C, DIN rail and wall mount, 9-48 V DC inputSKU: MILESIGHT-UR32-L0GEU-P-W-485-N - 4G Routers With POE PSE, Milesight, Milesight 4G Routers
Milesight UR35-L0GEU-P Industrial 4G Router with POE Out
4G Routers With POE PSE, Milesight, Milesight 4G RoutersMilesight UR35-L0GEU-P Industrial 4G Router with POE Out
The Milesight UR35 (UR35-L04EU-P) is an industrial 4G LTE Cat 4 router with dual SIM failover and four 802.3af/at PoE PSE ports. It powers IP cameras, access points, and other PoE devices straight from its LAN ports over a single cable, in a rugged IP30 metal enclosure for M2M and IoT field sites.
Key Features:
– 4G LTE Cat 4 across EU bands, up to 150 Mbps down and 50 Mbps up, with 3G and 2G fallback
– Four 802.3af/at PoE PSE ports on LAN1 to LAN4, 48 V DC input required
– Dual SIM with automated failover between two carriers
– Five 10/100 Ethernet ports (1 WAN + 4 LAN), 1.5 kV isolation
– 1 x RS232 and 1 x RS485 serial on a 3.5 mm terminal block
– 1 isolated digital input and 1 isolated digital output
– NXP ARM Cortex-A7 processor, 128 MB RAM, 128 MB flash, microSD slot
– Modbus RTU to TCP gateway, MQTT, DLMS, SNMP and TR069
– OpenVPN, IPsec, WireGuard, ZeroTier, GRE, L2TP, PPTP and DMVPN
– IP30 metal build, -40 to +70 C, 9 to 48 V DC inputSKU: MILESIGHT-UR35-L0GEU-P - 4G Routers With POE PSE, Milesight, Milesight 4G Routers
Milesight UR35-L0GEU-P-W Industrial 4G Router with Wi-Fi and PoE
4G Routers With POE PSE, Milesight, Milesight 4G RoutersMilesight UR35-L0GEU-P-W Industrial 4G Router with Wi-Fi and PoE
Milesight UR35 Industrial 4G Dual SIM Router with Wi-Fi and PoE (UR35-L0GEU-P-W)
The Milesight UR35-L0GEU-P-W is a rugged industrial 4G LTE Cat 4 router with dual SIM failover, 802.11b/g/n Wi-Fi, and four 802.3af/at PoE output ports for powering connected devices directly from the router. Built on an ARM Cortex-A7 processor with a hardened IP30 metal enclosure, it operates from -40 to +70 °C and supports RS232, RS485, digital I/O, Modbus, DLMS/COSEM, MQTT, and a full VPN suite including WireGuard, OpenVPN, and IPsec.
Key Features:
• 4G LTE Cat 4 with dual Mini SIM (2FF) slots and automatic SIM failover
• 4 x 802.3af/at PoE PSE LAN ports — up to 30 W per port, 60 W total
• 802.11b/g/n Wi-Fi (2.4 GHz) in AP or client mode, up to 15 simultaneous connections
• 5 x Fast Ethernet ports (1 x WAN, 4 x LAN); WAN port configurable as LAN
• RS232 + RS485 serial ports with Modbus RTU/TCP gateway, DLMS/COSEM client
• 1 x digital input and 1 x digital output with galvanic isolation on 3.5 mm terminal block
• VPN support: WireGuard, OpenVPN, IPsec, GRE, L2TP, PPTP, DMVPN, ZeroTier
• Hardware watchdog, VRRP, dual SIM backup, and ping-based failover
• Python SDK embedded for secondary development and custom application logic
• 9-48 V DC input (48 V required for PoE output); -40 to +70 °C operating rangeSKU: MILESIGHT-UR35-L0GEU-P-W-N - 5G Routers, Milesight, Milesight 5G Routers, Office 5G Router, Outdoor 5G Router
Milesight UF51-504AE-W4 5G Outdoor CPE with Wi-Fi 6
5G Routers, Milesight, Milesight 5G Routers, Office 5G Router, Outdoor 5G RouterMilesight UF51-504AE-W4 5G Outdoor CPE with Wi-Fi 6
The Milesight UF51-504AE-W4 is a 5G Sub-6 GHz outdoor CPE with Wi-Fi 6, an IP67-rated polycarbonate and cast aluminium enclosure, and built-in GPS, RS485 serial, and galvanically isolated DI/DO. It combines 5G cellular backhaul with dual-band Wi-Fi 6 local connectivity in a single weatherproof outdoor unit, making it the right choice for deployments where both 5G uplink and on-site wireless access are required.
Milesight UF51-504AE-W4 Key Features:
• 5G NR SA/NSA Sub-6 GHz – bands N1/N3/N5/N7/N8/N20/N28/N38/N40/N41/N77/N78
• Downlink up to 4.67 Gbps with 5G dual carrier aggregation (2CC CA)
• Wi-Fi 6 (802.11ax) dual-band – 2.4 GHz (up to 1200 Mbps) and 5 GHz (up to 2400 Mbps), 4 x 4 MIMO
• Quad-core ARM Cortex-A55, 2 GHz / 1 GB LPDDR4x RAM / 1 GB NAND Flash
• 1 x 10/100/1000/2500 Mbps WAN/LAN port + 1 x 10/100/1000 Mbps LAN port
• 802.3at PoE PD on WAN port – single cable power and data
• Built-in GPS/GLONASS/Beidou/Galileo/QZSS with 2 m CEP accuracy
• 1 x RS485 serial port (RS232 hardware optional) with Modbus TCP/RTU support
• 1 x DI + 1 x DO with galvanic isolation
• VPN support: OpenVPN, IPsec, L2TP, PPTP
• Node-RED edge application runtime built in
• IP67 rated – pole, wall, desktop, or bottom screw mounting
• Available without WiFi – see UF51-504AESKU: MILESIGHT-UF51-504AE-W4 - 4G CCTV, 4G Routers, Teltonika, Teltonika 4G Routers, Teltonika eSIM Routers
Teltonika RUT951 POE+ 4G Router
4G CCTV, 4G Routers, Teltonika, Teltonika 4G Routers, Teltonika eSIM RoutersTeltonika RUT951 POE+ 4G Router
The Teltonika RUT951 PoE+ is an industrial 4G LTE Cat 4 router with a built-in PoE+ switch, offering reliable connectivity for harsh environments. Featuring dual SIM slots, VPN support, and wide-temperature operation (-40°C to +75°C), it’s ideal for surveillance, IoT, and remote monitoring. Includes 3x PoE+ ports (30W each) for powering devices.
Key Features:
- 4G LTE Cat 4 – 150Mbps max download speeds with dual-SIM failover
- Built-in PoE+ Switch – 1x PoE IN + 3x PoE OUT (30W each, 60W total)
- Industrial Durability – Operates in extreme temps (-40°C to +75°C), IP30 metal casing
- Advanced Security – VPN (IPsec/OpenVPN/WireGuard), firewall, remote management (RMS)
- Versatile Connectivity – Dual-band Wi-Fi, RS232 serial, and Gigabit Ethernet ports
- Dual SIM / eSIM – flexible IoT SIM options for maximum resilience.
SKU: TELTONIKA-RUT951-POE+-PSU-N - Accessories
POE Splitter Adapter
Power your router by POE with this POE adapter. Ideal for powering M2M / IOT routers by POE. Gigabit POE takes 48V POE Source and converts it to 12VDC power with 2.5mm connector and Gigabit Ethernet. This is the easy way to connect and power your 4G or 5G router using standard POE. Also ideal for other network devices that need separate power and Gigabit Ethernet connection using POE.
SKU: POE Splitter-N
