No products in the basket.
MQTT
Showing all 6 results
- CAT6 4G Router, Teltonika, Teltonika 4G Routers
Teltonika RUT261 Compact CAT6 LTE 4G Router with WiFi and Ethernet
CAT6 4G Router, Teltonika, Teltonika 4G RoutersTeltonika RUT261 Compact CAT6 LTE 4G Router with WiFi and Ethernet
The Teltonika RUT261 is a compact 4G LTE Cat 6 industrial router for space-constrained and embedded installations. Carrier aggregation lifts it to 300 Mbps download, so it holds the small RUT200 footprint while adding real Cat 6 speed.
Key features:
– 4G LTE Cat 6 with carrier aggregation, 300 Mbps down and 50 Mbps up
– Single Mini SIM (2FF) with external front-panel holder
– Wi-Fi 4 (802.11b/g/n) access point and station, WPA3, up to 50 clients
– 2 x Fast Ethernet ports, 1 WAN and 1 LAN, WAN reconfigurable as LAN
– 1 x digital input and 1 x digital output on the 4-pin power connector
– Passive PoE input on LAN1, 9 to 30 V DC, Mode B
– Full RutOS: OpenVPN, WireGuard, IPsec, Modbus TCP, DNP3, OPC UA, MQTT
– Teltonika RMS remote management and monitoring
– 9 to 30 V DC input, reverse polarity and surge protection, -40 to 75 degrees C
– Aluminium housing, 83 x 25 x 74 mm, IP30, DIN rail mountable
– RUT261AADAA0 is the part code for the RUT261 with UK PSUSKU: TELTONIKA-RUT261AADAA0 - Ethernet Routers
Teltonika RUTX10 Professional Ethernet Router (4 x GB Ethernet), WiFi and Bluetooth
The Teltonika RUTX10 is a non-cellular industrial router with Gigabit Ethernet, dual-band Wi-Fi 5 and built-in Bluetooth LE. It gathers Bluetooth sensor data and routes it over a wired or Wi-Fi connection, so it suits sites that already have fixed backhaul and need a BLE hub rather than a modem.
Key Features:
– Bluetooth Low Energy with a dedicated RP-SMA antenna connector
– 4 x Gigabit Ethernet ports, 1 x WAN (configurable as LAN) and 3 x LAN
– Dual-band Wi-Fi 5 (802.11ac Wave-2) with MU-MIMO, up to 867 Mbps
– No cellular modem and no SIM slot, wired or Wi-Fi backhaul only
– Quad-core ARM Cortex A7 CPU, 256 MB RAM, 256 MB flash
– RutOS with OpenVPN, IPsec, DMVPN and firewall
– USB 2.0 for storage, USB-to-serial and external devices
– 1 x digital input and 1 x digital output for monitoring and control
– 9 to 50 V DC power, passive PoE over the LAN port
– DIN rail mountable, -40 to +75 degrees C, IP30
– Teltonika RMS remote management compatible
– 2-year manufacturer warranty
– RUTX10000300 / Standard package with UK PSUSKU: TELTONIKA-RUTX10-N - 4G Routers, Teltonika, Teltonika 4G Routers, Teltonika eSIM Routers
Teltonika RUT200 Industrial 4G Router with eSIM
4G Routers, Teltonika, Teltonika 4G Routers, Teltonika eSIM RoutersTeltonika RUT200 Industrial 4G Router with eSIM
Teltonika RUT200 (RUT200343000) is a compact industrial 4G Cat 4 Router with integrated eSIM, supplied with a UK PSU and modem designed for UK and European mobile network connectivity. The built-in eSIM runs alongside a physical Mini SIM (2FF) slot, with configurable switching between them on signal loss, data limit, roaming or network failure – no site visit required to change network.
Key Features:
• 4G LTE Cat 4 – 150 Mbps download / 50 Mbps upload
• Integrated eSIM with up to 7 stored profiles plus 1 x Mini SIM (2FF) physical slot
• Automatic SIM/eSIM failover – triggers on weak signal, data limit, roaming, no network or connection failure
• LTE FDD bands B1, B3, B5, B7, B8, B20, B28 – covers all major UK 4G frequencies
• 802.11b/g/n Wi-Fi access point and station modes, up to 50 simultaneous clients
• 1 x WAN and 1 x LAN, 10/100 Mbps Ethernet (WAN configurable as LAN in RutOS)
• Digital input and digital output on 4-pin industrial power connector
• Passive PoE input on LAN1, 9-30 V DC, Mode B – not compatible with 802.3af/at injectors or switches
• -40 to +75 °C operating temperature, IP30, aluminium enclosure, 125 g
• RutOS with OpenVPN, WireGuard, IPsec, Modbus TCP, MQTT, DNP3 and Teltonika RMS
SKU: TELTONIKA-RUT200343000-ESIM-N - 4G Routers, Teltonika, Teltonika 4G Routers
Teltonika RUT202 Compact Dual SIM 4G LTE Router
The Teltonika RUT202 is a compact dual SIM 4G LTE Cat 4 industrial router built for embedded and space-constrained installations. It carries two internal Mini SIM slots with automatic failover, digital I/O on the power connector, passive PoE input, and the full RutOS software stack in an anodised aluminium enclosure measuring just 83 x 25 x 74 mm.
Key Features:
• 4G LTE Cat 4 – 150 Mbps download / 50 Mbps upload with 3G and 2G fallback
• Dual internal SIM slots (Mini SIM 2FF, double stacked tray) with automatic failover on weak signal, data limit, roaming, no network, or connection failure
• Digital input and digital output on 4-pin power connector – 0-6 V logic low, 8-30 V logic high; open collector output max 30 V / 300 mA
• Passive PoE input via LAN1 spare pairs, 9-30 VDC – Mode B, not compatible with 802.3af/at/bt
• Wi-Fi 4 (802.11b/g/n) – access point and station modes, WPA3-SAE, up to 50 clients
• 9-30 VDC wide-range DC input via 4-pin industrial power connector; reverse polarity and surge protection
• RutOS with OpenVPN, WireGuard, IPsec, Modbus TCP, OPC UA, MQTT, DNP3 and RMS support
• Anodised aluminium housing; IP30; -40 to +75°C operating range
• DIN rail, wall mount and flat surface mounting (kit sold separately)
• Teltonika RMS compatible – zero-touch provisioning and remote managementSKU: TELTONIKA-RUT202-N - 4G Routers, Teltonika, Teltonika 4G Routers
Teltonika RUT204 CAN BUS LTE Router
The Teltonika RUT204 is a compact 4G LTE Cat 4 router with a native CAN Bus interface, built for vehicle telematics, industrial machine monitoring, and mobile IoT deployments. It combines dual SIM failover, integrated GNSS, RS232 serial, active PoE input, and a wide 9-57 VDC power range in an anodised aluminium enclosure rated to -40 to +75°C.
Key Features:
• 4G LTE Cat 4 – 150 Mbps download / 50 Mbps upload with 3G and 2G fallback
• Native CAN Bus interface via 6-pin terminal block – CAN frame forwarding over IP; CANopen and J1939 client support on firmware roadmap
• Dual internal SIM slots (Mini SIM 2FF, double stacked tray) with automatic failover
• GNSS: GPS, GLONASS, BeiDou, Galileo and QZSS with geofencing and NMEA 0183
• RS232 serial interface (TX/RX) on 6-pin terminal block
• Active PoE input 802.3af Class 0 on LAN port; passive PoE input 16-57 VDC
• Wide-range 9-57 VDC DC power input with reverse polarity and surge protection
• Internal Micro SD slot up to 2 TB for local data logging
• Wi-Fi 4 (802.11b/g/n) – access point and station modes, up to 50 clients
• RutOS with OpenVPN, WireGuard, IPsec, Modbus, MQTT, DNP3 and RMS supportSKU: TELTONIKA-RUT204-N - 4G Routers, Teltonika, Teltonika 4G Routers
Teltonika RUT200 4G LTE Industrial Cellular Router
The Teltonika RUT200 (RUT200013000) is a compact 4G LTE Cat 4 industrial cellular router with a single Mini SIM, 802.11b/g/n Wi-Fi, and two 10/100 Mbps Ethernet ports in a 125 g aluminium housing. It runs RutOS on a Mediatek 580 MHz processor with a full VPN stack, industrial protocol support, digital I/O, and Teltonika RMS compatibility, operating from -40 to +75 °C.
Key Features:
• 4G LTE Cat 4 – 150 Mbps down / 50 Mbps up; automatic fallback to 3G and 2G
• Single Mini SIM (2FF) with auto APN, band lock, and operator block/allow list
• Wi-Fi 4 (802.11b/g/n) – access point and station modes, up to 50 simultaneous clients
• 1 x WAN + 1 x LAN (10/100 Mbps); WAN port configurable as second LAN via RutOS
• 1 x digital input and 1 x digital output on 4-pin power connector
• Passive PoE input via LAN1 – Mode B, 9-30 V DC (not compatible with 802.3af/at/bt)
• VPN: OpenVPN, IPsec, WireGuard, ZeroTier, GRE, L2TP, DMVPN, SSTP, Tinc
• Modbus TCP, OPC UA, DNP3, MQTT broker/publisher, Azure IoT Hub, AWS IoT Core
• Teltonika RMS compatible – remote management, FOTA, alerts, and VPN tunnels
• CE, UKCA, E-mark certified; IP30; 83 x 25 x 74 mm; 125 gSKU: TELTONIKA-RUT200013000-N
