No products in the basket.
MilesightVPN
Showing all 4 results
- Milesight, Milesight 4G Routers
Milesight UR32S Lite Series 4G Router with WiFi, 2 x Ethernet (UR32S-L0GEU)
Milesight, Milesight 4G RoutersMilesight UR32S Lite Series 4G Router with WiFi, 2 x Ethernet (UR32S-L0GEU)
The Milesight UR32S-L0GEU is a compact Lite Series industrial 4G LTE Cat 4 router with 2.4 GHz Wi-Fi, two Ethernet ports and automatic failover between a wired WAN and the cellular network. Wi-Fi is the reason to choose it over the UR32L, and it works in both AP and client mode, which lets an engineer bind the router to the M-Sight Pro app from a phone or bring the site online over an existing wireless network.
Key Features:
4G LTE Cat 4 with 3G and 2G fallback, 150 Mbps down / 50 Mbps up
2.4 GHz 802.11b/g/n Wi-Fi, AP mode or client mode
Automatic failover and failback between Ethernet WAN and cellular
1 x Mini SIM (2FF) slot, 1.8 V / 3 V
2 x RJ45 10/100 Mbps Ethernet, 1 x WAN + 1 x LAN or 2 x LAN, 1.5 kV isolation
1 x SMA cellular antenna connector and 1 x RP-SMA Wi-Fi antenna connector
VPN: IPsec, OpenVPN, GRE, L2TP, PPTP and DMVPN
MilesightVPN and M-Sight Pro app support for remote camera and NVR access
Remote management through the Milesight Development Platform and DeviceHub
ARM Cortex-A7 528 MHz, 128 MB DDR3 RAM, 128 MB flash, hardware watchdog
9 to 48 V DC, typical 1.8 W, surge and reverse polarity protection
-40 to +70 degrees C, IP30 metal housing, DIN rail, wall or desktop mountSKU: MILESIGHT-UR32S-L0GEU-N - 4G Routers With POE PSE, Milesight, Milesight 4G Routers
Milesight UR32S Lite Series 4G Router with WiFi, 2 x Ethernet and POE Out (UR32S-L0GEU-P)
4G Routers With POE PSE, Milesight, Milesight 4G RoutersMilesight UR32S Lite Series 4G Router with WiFi, 2 x Ethernet and POE Out (UR32S-L0GEU-P)
The Milesight UR32S-L0GEU-P is a compact Lite Series industrial 4G LTE Cat 4 router with 802.3af/at PoE PSE output on both LAN ports, 2.4 GHz Wi-Fi and automatic failover between a wired WAN and cellular. It powers an IP camera, access point or door reader directly from the router, which removes the injector from the enclosure and leaves one device to install, power and maintain at a remote site.
Key Features:
802.3af/at PoE PSE on both LAN ports, 30 W per port and 60 W total
Ships with the 48 V UK mains PSU that the PoE ports require, no extra supply to buy
4G LTE Cat 4 with 3G and 2G fallback, 150 Mbps down / 50 Mbps up
2.4 GHz 802.11b/g/n Wi-Fi, AP mode or client mode
Automatic failover and failback between Ethernet WAN and cellular
1 x Mini SIM (2FF) slot, 1.8 V / 3 V
2 x RJ45 10/100 Mbps Ethernet, 1.5 kV isolation
1 x SMA cellular antenna connector and 1 x RP-SMA Wi-Fi antenna connector
VPN: IPsec, OpenVPN, GRE, L2TP, PPTP and DMVPN
MilesightVPN and M-Sight Pro app support for remote camera and NVR access
Remote management through the Milesight Development Platform and DeviceHub
-40 to +70 degrees C, IP30 metal housing, DIN rail, wall or desktop mountSKU: MILESIGHT-UR32S-L0GEU-P - IoT 4G Gateway, Milesight, Milesight 4G Routers
Milesight UR41 4G Cat 4 Mini Industrial Router with GPS
IoT 4G Gateway, Milesight, Milesight 4G RoutersMilesight UR41 4G Cat 4 Mini Industrial Router with GPS
The Milesight UR41 (UR41-L08EU) is a compact 4G LTE Cat 4 industrial router built for embedded IoT deployments where space, power budget, and serial device connectivity all matter. At 70 x 55 x 22 mm and 103 g, it combines RS232/RS485, digital I/O, GPS/GNSS, and a hardware watchdog in a metal IP30 enclosure rated to -40 to +60 °C.
Key Features:
• 4G LTE Cat 4 – up to 150 Mbps down / 50 Mbps up, with 3G/2G fallback
• GPS/GNSS – GPS, GLONASS, BeiDou, Galileo, QZSS, 2.5 m CEP accuracy
• RS232 or RS485 (software switchable) – Modbus RTU/TCP, transparent serial, DLMS client
• 1 x digital input + 1 x digital output, galvanically isolated, 3.5 mm terminal block
• Dual power input: 5-24 V DC terminal block or 5 V USB Type-C
• Power-saving standby and idle modes – 6.3 mA standby at 12 V
• Hardware watchdog for automatic recovery from cellular or system failures
• VPN support: IPsec, OpenVPN, WireGuard, GRE, L2TP, PPTP, DMVPN, ZeroTier
• Remote management via Milesight Development Platform and MilesightVPN
• Desk, wall, and DIN rail mounting – 70 x 55 x 22 mm, 103 gSKU: MILESIGHT-UR41-L08EU-N - Milesight, Milesight 4G Routers
Milesight UR41L 4G Cat 1 Mini Industrial Router
The Milesight UR41L (UR41L-L0CEU) is a compact 4G LTE Cat 1 industrial router built for cost-sensitive M2M and IoT deployments where low power consumption and serial device connectivity matter more than peak throughput. At 70 x 55 x 22 mm and 103 g, it combines RS232/RS485, galvanically isolated digital I/O, and a hardware watchdog in a metal IP30 enclosure rated to -40 to +60 °C.
Key Features:
• 4G LTE Cat 1 connectivity for low-throughput M2M and IoT applications
• RS232 or RS485 (software switchable) – Modbus RTU/TCP, transparent serial, DLMS client
• 1 x digital input + 1 x digital output, galvanically isolated, 3.5 mm terminal block
• Dual power input: 5-24 V DC terminal block or 5 V USB Type-C
• Ultra-low standby power: 6.3 mA at 12 V – suitable for battery and solar-powered installs
• Hardware watchdog for automatic recovery from cellular or system failures
• VPN support: IPsec, OpenVPN, WireGuard, GRE, L2TP, PPTP, DMVPN, ZeroTier
• Remote management via Milesight DeviceHub and MilesightVPN
• Scheduled wake, SMS wake, and DI wake for power-managed deployments
• Desk, wall, and DIN rail mounting – 70 x 55 x 22 mm, 103 gSKU: MILESIGHT-UR41L-L0CEU
