-
×
-
×
-
×
Subtotal: £764.00
LTE Cat 4 router
Showing all 4 results
- 4G Routers, Teltonika, Teltonika 4G Routers
Teltonika RUT281 Global 4G Router
The Teltonika RUT281 is the smallest industrial LTE Cat 4 router in the Teltonika range, built for reliable global 4G connectivity in space-constrained fixed installations. A Telit modem covering 18 LTE bands delivers single-SKU worldwide deployment, with eSIM support for remote SIM provisioning without an on-site visit.
Key Features:
• Global 4G LTE Cat 4 via Telit modem – 150 Mbps down / 50 Mbps up
• 18 LTE bands: B1, B2, B3, B4, B5, B7, B8, B9, B12, B13, B14, B18, B19, B20, B25, B26, B28
• 3G UMTS (7 bands) and 2G GSM (4 bands) fallback for full global coverage
• 1 x Physical Mini SIM (2FF) + eSIM with up to 7 downloadable profiles
• 2 x 10/100 Mbps Ethernet (1 WAN + 1 LAN) with passive PoE on LAN port
• 802.11b/g/n Wi-Fi – Access Point and Station modes, up to 50 clients
• 1 x Digital Input, 1 x Digital Output on 4-pin industrial power connector
• 9-30 VDC input, less than 4W consumption – DIN rail and wall mountable
• Operating temperature -40 to +65 degrees C, IP30 aluminium housing, 83 x 25 x 74 mm
• RutOS with Modbus TCP, OPC UA, DNP3, DLMS/COSEM, full VPN suite and Teltonika RMS supportSKU: TELTONIKA-RUT281-N - 4G Routers, Teltonika, Teltonika 4G Routers
Teltonika RUT981 Global 4G Router
The Teltonika RUT981 is a global 4G Cat 4 industrial router with dual SIM, eSIM, and four Ethernet ports, built for deployments that need worldwide LTE connectivity from a single hardware SKU. Powered by a Telit modem covering 18 LTE bands, it covers Europe, the Americas, Asia-Pacific, and the Middle East with one order code.
Key Features:
• Global 4G LTE Cat 4 via Telit modem – 150 Mbps down / 50 Mbps up
• 18 LTE bands: B1, B2, B3, B4, B5, B7, B8, B9, B12, B13, B14, B18, B19, B20, B25, B26, B28
• Dual physical SIM (Mini SIM 2FF) plus eSIM with Bootstrap provisioning
• WAN failover and load balancing across SIM 1, SIM 2, and eSIM
• 802.11b/g/n Wi-Fi 4 (2.4 GHz), 2×2 MIMO, up to 100 simultaneous clients
• 4x RJ45 (1x WAN, 3x LAN), 10/100 Mbps
• Passive PoE input (9-30 VDC, Mode B) via LAN1 port
• Digital input and digital output on industrial 4-pin power connector
• DIN rail, wall, and flat surface mounting (kit required)
• RutOS with VPN suite, MQTT, Modbus, and Teltonika RMS support
• -40 to +65 degrees C operating range, IP30, aluminium enclosureSKU: TELTONIKA-RUT981-N - 4G Routers, Teltonika, Teltonika 4G Routers
Teltonika RUT986 Global 4G Router
The Teltonika RUT986 is a global 4G LTE Cat 4 industrial router with RS232, RS485, GNSS, comprehensive I/O, and Micro SD storage, built for SCADA, energy, utilities, and industrial IoT deployments requiring serial connectivity alongside cellular. Powered by a Telit modem covering 18 LTE bands worldwide, it replaces regional hardware variants with a single globally-certified unit.
Key Features:
• Global 4G LTE Cat 4 via Telit modem – 150 Mbps down / 50 Mbps up, 3G/2G fallback
• 18 LTE bands: B1, B2, B3, B4, B5, B7, B8, B9, B12, B13, B14, B18, B19, B20, B25, B26, B28
• Dual physical SIM (Mini SIM 2FF) plus eSIM with Bootstrap provisioning (up to 7 eSIM profiles)
• RS232 (DB9) and RS485 full/half duplex serial ports, 300-115200 baud
• GNSS receiver: GPS, GLONASS, BeiDou, Galileo, QZSS – geofencing, NMEA, NTRIP client
• 4 digital/analog inputs and 3 outputs including SPST relay (40V, 4A) and analog 4-20 mA input
• 1x USB-A port, Micro SD slot (up to 2 TB) for local data logging
• Industrial protocols: Modbus, DNP3, OPC UA, BACnet, DLMS/COSEM
• 4x RJ45 (1x WAN, 3x LAN), 10/100 Mbps, passive PoE input via LAN1
• RutOS with VPN suite (OpenVPN, WireGuard, IPsec), VRF, RMS remote management
• -40 to +65 degrees C, IP30, aluminium enclosure, 110 x 50 x 100 mm, 294 gSKU: TELTONIKA-RUT986-N - 4G Routers, Edge Computing, Teltonika, Teltonika 4G Routers
Teltonika RUTC40 Global Edge 4G Router
The Teltonika RUTC40 is a global 4G Cat 4 edge router built for demanding industrial and IoT deployments. Powered by a Telit modem with worldwide LTE band support, it combines dual-band Wi-Fi 6, a dual-core 1.3 GHz CPU, 1 GB RAM, and Docker container support in a rugged industrial enclosure. Whether you need primary connectivity, WAN failover, or local edge computing, the RUTC40 delivers.
- Global 4G LTE Cat 4 via Telit modem – up to 150 Mbps down / 50 Mbps up
- Dual-band Wi-Fi 6 (802.11ax) with MU-MIMO, up to 512 simultaneous clients
- Dual-core ARM Cortex-A53 1.3 GHz CPU, 1 GB RAM, 8 GB flash
- Docker support – run containerised applications directly on the router
- 5x Gigabit Ethernet ports (1x WAN, 4x LAN)
- Dual Nano SIM + consumer eSIM with automatic failover
- Industrial operating range: -40 to +75 degrees C, DIN rail mountable
- RutOS with full VPN, firewall, Modbus, MQTT and industrial protocol support
- Teltonika RMS compatible for remote monitoring and fleet management
SKU: TELTONIKA-RUTC40-N
