No products in the basket.
Industries
Energy and utilities
Remote monitoring and control for generation, storage and utility sites, usually rural and often with weak signal. We supply industrial 4G and 5G routers, gateways, antennas and SIMs for solar, wind, battery storage, EV charging, water and grid sites.
Energy and utilities applications
Solar farmsInverter, SCADA and CCTV connectivity for ground-mount and rooftop solar sites. Most solar farms…
Wind turbinesTurbine monitoring and remote access links for single turbines and wind farms, usually on…
Battery storage (BESS)Secure links for battery management, grid services and site security at battery energy storage…
EV chargingOCPP back-office and payment connectivity for EV chargers in car parks, on streets and…
Substations and smart gridSecure telemetry and remote access for substations, ring main units and grid equipment. Utilities…
Water and wastewaterTelemetry for pumping stations, reservoirs, flow meters and treatment works, many of them in…
Smart metering and telemetryLow-data links for meters, data loggers and sensors that send small amounts of data.…
Off-grid and generatorsMonitoring for generators, off-grid power systems and Victron installations, where there is no grid…
Products for Energy and utilities
-
Teltonika RUT200 4G LTE Industrial Cellular Router
2 versions availableThe Teltonika RUT200 is an entry-level industrial 4G router: LTE Cat 4, Wi-Fi, two Ethernet ports and a digital input and output in a small aluminium case rated from -40 to 75…
£84.00 ex VAT£100.80 inc VAT Add to basket -
Fullband FB4GMAG7 - High Gain Mag Mount 4G Antenna 7dBi with 5m cable (SMA)
The Fullband FB4GMAG7 is an indoor high-gain magnetic-mount 4G antenna with 7 dBi peak gain, an SMA male connector and 5 m RG174 cable.
£14.00 ex VAT£16.80 inc VAT Add to basket -
FB5GTBAR 4G/5G Adhesive T-BAR Antenna
The Fullband FB5GTBAR is an adhesive 4G/5G T-bar antenna with 4 dBi peak gain, an SMA male connector and 2.5 m LL100 cable.
£9.50 ex VAT£11.40 inc VAT Add to basket -
Teltonika RUT956 Industrial 4G Router with RS232, RS485 and GNSS
3 versions availableThe Teltonika RUT956 is an industrial 4G router for telemetry and control: dual SIM, four Ethernet ports, RS232 and RS485, USB, GNSS positioning and a full set of inputs and outputs, including…
£215.00 ex VAT£258.00 inc VAT Add to basket -
Teltonika RUT951 Industrial 4G Router with eSIM
4 versions availableThe Teltonika RUT951 is an industrial 4G router with 4G LTE Cat 4, two SIM slots plus eSIM, Wi-Fi 4, four Ethernet ports and digital I/O.
£189.00 ex VAT£226.80 inc VAT Add to basket -
Poynting XPOL-2-5G Directional 2x2 MIMO Antenna
The Poynting XPOL-2-5G is a 2x2 MIMO cross-polarised directional 4G/5G antenna with up to 11 dBi peak gain, 2 x SMA male connectors and 2 x 5 m HDF195 cables.
£139.00 ex VAT£166.80 inc VAT Add to basket -
Fullband FB4GMAG3 Mini Mag Mount 4G Antenna 3dBi Peak Gain
The Fullband FB4GMAG3 is a mini magnetic-mount 4G antenna with 2.7 dBi peak gain, an SMA male connector and 2.5 m LL100 cable.
£7.50 ex VAT£9.00 inc VAT Add to basket -
Teltonika TRB140 Industrial Rugged 4G/LTE CAT4 Gateway
The Teltonika TRB140 is an industrial 4G IoT gateway with 4G LTE Cat 4, one gigabit Ethernet port and digital I/O.
£117.50 ex VAT£141.00 inc VAT Add to basket -
Teltonika OTD140 Outdoor 4G Router
The Teltonika OTD140 is an outdoor 4G router with 4G LTE, two SIM slots, two Ethernet ports and PoE output.
£115.00 ex VAT£138.00 inc VAT Add to basket -
Fullband FB4GPUCK-2 4G 2x2 MIMO Screw / Panel Mount Puck Antenna 4dBi Peak Gain 2.5m cable SMA Male
The Fullband FB4GPUCK-2 is a compact 2x2 MIMO 4G puck antenna with 4 dBi peak gain, 2 x SMA male connectors and 2 x 2.5 m LL100 cables.
£19.00 ex VAT£22.80 inc VAT Add to basket -
Teltonika RUTM30 Compact 5G Router
The Teltonika RUTM30 is an industrial 5G router with 5G (up to 3.4Gbps download, 4G fallback), two SIM slots, Wi-Fi 5, two gigabit Ethernet ports and digital I/O.
£355.00 ex VAT£426.00 inc VAT Add to basket -
Fullband FB4GPUCK 4G Screw / Panel Mount Puck Antenna 4dBi Peak Gain 2.5m cable SMA Male
The Fullband FB4GPUCK is a compact 4G puck antenna with 4 dBi peak gain, an SMA male connector and 2.5 m cable.
£13.00 ex VAT£15.60 inc VAT Add to basket
Technologies used: Antennas and signal4G LTE5GIoT and M2MSerial and ModbusSIM, eSIM and IP addressing
Why these sites use cellular connectivity
Energy sites are rarely near a good fixed line, and many need two separate connections: one for the operator's monitoring and control, and one for CCTV and security. Industrial cellular routers handle both, with VPNs to keep control traffic private and remote management so a fault does not mean a long drive.
Applications we help with
- Solar farms: Inverter, SCADA and CCTV connectivity for ground-mount and rooftop solar sites.
- Battery storage (BESS): Secure links for battery management, grid services and site security at battery energy storage (BESS) sites.
- EV charging: OCPP back-office and payment connectivity for EV chargers in car parks, on streets and at workplaces.
- Wind turbines: Turbine monitoring and remote access links for single turbines and wind farms, usually on exposed, remote sites far from any fixed line.
- Water and wastewater: Telemetry for pumping stations, reservoirs, flow meters and treatment works, many of them in remote places with weak signal.
- Substations and smart grid: Secure telemetry and remote access for substations, ring main units and grid equipment.
- Smart metering and telemetry: Low-data links for meters, data loggers and sensors that send small amounts of data.
- Off-grid and generators: Monitoring for generators, off-grid power systems and Victron installations, where there is no grid and usually no broadband either.
From Teltonika
Teltonika publishes case studies showing its routers in real projects. See: intelligent solar energy management with the RUTC41, connectivity for energy storage systems, Teltonika energy and utilities use cases. Teltonika's documentation wiki covers set-up for every router we sell.
Talk to an M2M and IoT connectivity specialist. Every site is different. Tell us what you need to connect, where it is and how you want to manage it, and our UK team will recommend the router, antenna and SIM, with configuration options if you want it ready to plug in.
Questions
Can one router handle both SCADA and CCTV on an energy site?
It can, with separate networks (VLANs) and firewall rules, but many operators prefer separate routers so a CCTV fault never affects control traffic. We can advise on both approaches.