No products in the basket.
Energy and utilities
EV charging
OCPP back-office and payment connectivity for EV chargers in car parks, on streets and at workplaces. Chargers cannot take payment or report to the network operator without a reliable data link.
Products for EV charging
-
Teltonika RUT956 Industrial 4G Router with RS232, RS485 and GNSS
3 versions availableThe Teltonika RUT956 is an industrial 4G router for telemetry and control: dual SIM, four Ethernet ports, RS232 and RS485, USB, GNSS positioning and a full set of inputs and outputs, including…
£215.00 ex VAT£258.00 inc VAT Add to basket -
Teltonika RUT951 Industrial 4G Router with eSIM
4 versions availableThe Teltonika RUT951 is an industrial 4G router with 4G LTE Cat 4, two SIM slots plus eSIM, Wi-Fi 4, four Ethernet ports and digital I/O.
£189.00 ex VAT£226.80 inc VAT Add to basket -
Teltonika OTD140 Outdoor 4G Router
The Teltonika OTD140 is an outdoor 4G router with 4G LTE, two SIM slots, two Ethernet ports and PoE output.
£115.00 ex VAT£138.00 inc VAT Add to basket -
Multi-Network Roaming Data SIM, 30-Day Rolling
Roaming data SIM that connects to the strongest UK network at your site: EE, O2 or VodafoneThree.
£6.50 to £35.75 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page
Technologies used: 4G LTESIM, eSIM and IP addressing
Typical set-ups
A bank of chargers in a car park
One router connects several chargers to the back office over Ethernet, often with a PoE or Ethernet switch. A multi-network SIM avoids depending on one network's coverage in the car park.
Typical kit: Teltonika RUT951 or RUT956, with a network switch and a multi-network data SIM.
Underground or multi-storey car parks
Signal is poor below ground. Put the router or antenna where the signal is and run Ethernet down to the chargers.
Typical kit: An outdoor Teltonika OTD140 at street level, or a router with an external antenna.
Things to check before you buy
- Which chargers support Ethernet and which need their own SIM.
- Signal in the car park, especially underground.
- Remote management, as chargers are spread across many sites.
We also explain Teltonika's own EV chargers.
From Teltonika
Teltonika publishes case studies showing its routers in real projects. See: cellular routers for EV charging stations, outdoor router for an underground EV charging station. Teltonika's documentation wiki covers set-up for every router we sell.
Talk to an M2M and IoT connectivity specialist. Every site is different. Tell us what you need to connect, where it is and how you want to manage it, and our UK team will recommend the router, antenna and SIM, with configuration options if you want it ready to plug in.
Questions
Do EV chargers need a fixed IP?
Most OCPP chargers connect out to the back office, so a dynamic IP SIM is fine. A fixed IP is only needed if something must connect in to the charger directly.
Can I connect several chargers to one router?
Yes. Chargers with Ethernet can share one router through a switch, which is usually simpler and cheaper than a SIM in every charger.