Skip to content
Contact us Log in Wish list 0
Basket 0

No products in the basket.

Energy and utilities

Water and wastewater

Telemetry for pumping stations, reservoirs, flow meters and treatment works, many of them in remote places with weak signal.

Get a recommendation Call 0300 124 6181

Products for Water and wastewater

View all

Technologies used: IoT and M2MSerial and Modbus4G LTE

Typical set-ups

Pumping station telemetry

Connect the PLC or outstation so levels, pump status and alarms reach the control room, with SMS alerts as a fallback.

Typical kit: Teltonika RUT956 (serial, I/O) or TRB246.

Wastewater substations with CAN bus equipment

Some equipment talks CAN bus. Teltonika's RUT204 was used for exactly this in a wastewater project.

Typical kit: Teltonika RUT204; see our RUT204 wastewater article.

Things to check before you buy

  • Interfaces: Ethernet, serial, CAN or I/O.
  • Power backup so alarms still send during a power cut.
  • External antennas for kiosks and underground chambers.

From Teltonika

Teltonika publishes case studies showing its routers in real projects. See: remote wastewater substation connectivity, water plant connectivity with IoT gateways and UPS. Teltonika's documentation wiki covers set-up for every router we sell.

Talk to an M2M and IoT connectivity specialist. Every site is different. Tell us what you need to connect, where it is and how you want to manage it, and our UK team will recommend the router, antenna and SIM, with configuration options if you want it ready to plug in.

Send us your requirements Call 0300 124 6181

Questions

Can a router send an alarm if the power fails?

Yes, with a backup supply. Routers with digital inputs can send SMS or email alerts when a power-fail contact changes state.

Tell us about your project

Get a recommended router, antenna and SIM for your sites, with trade pricing for volume.

We use these details only to reply to your enquiry.