Security
CCTV and video surveillance
Routers, antennas and SIMs for remote cameras and NVRs, with enough upload for live viewing and secure remote access. This is the application we are asked about most, from a single camera on a gatepost to a full site of IP cameras on a building plot.
Our picks for cctv and video surveillance
The kit we recommend most often for this job. Not sure which fits? Tell us about your site or call 0300 124 6181.
1Teltonika RUT241 eSIM 4G Router
Compact 4G router with eSIM for single cameras and small NVRs
£150.00 ex VAT£180.00 inc VATAdd to basket
2Teltonika RUT956 Industrial 4G Router with RS232, RS485 and GNSS
4G with dual SIM, RS232/RS485 and GNSS for larger or remote systems
£215.00 ex VAT£258.00 inc VATAdd to basket
3Teltonika RUTC50 5G Industrial Router with Docker and Wi-Fi 6
5G with Wi-Fi 6 for multi-camera sites that need more upload
£599.00 ex VAT£718.80 inc VATAdd to basket
4Teltonika OTD500 Outdoor 5G Router (PoE In and PoE Out)
Outdoor 5G router with PoE in and out for poles and towers
£395.00 ex VAT£474.00 inc VATAdd to basket
5Poynting XPOL-1-5G Omni 2x2 MIMO 4G/5G Antenna
Omni 2x2 MIMO 4G/5G antenna to improve signal at the cabinet
£71.00 ex VAT£85.20 inc VATAdd to basket
More products used for CCTV and video surveillance
-
Fullband® MIMORAD Outdoor 4G/5G MIMO Antenna 6dBi Peak Gain with 2 x 5m cables with SMA Male Connectors
The Fullband MIMORAD is an outdoor 2x2 MIMO omni-directional 4G/5G antenna with 6 dBi peak gain, 2 x SMA male connectors and 2 x 5 m RG58 cables.
End of life See the replacement -
Teltonika RUT200 4G LTE Industrial Cellular Router
2 versions availableThe Teltonika RUT200 is an entry-level industrial 4G router: LTE Cat 4, Wi-Fi, two Ethernet ports and a digital input and output in a small aluminium case rated from -40 to 75…
£84.00 ex VAT£100.80 inc VAT Add to basket -
Proroute H820 WRT 4G Router with 4 x LAN, 1 x WAN and Wi-Fi - Industrial Grade M2M LTE 4G Router
The Proroute H820 is an industrial 4G router with a 4-port switch with 4G LTE Cat 4, 4 x LAN and 1 x WAN, 10/100 Mbps; the WAN port can run as…
£135.00 ex VAT£162.00 inc VAT Add to basket -
Proroute® H685® WRT 5G Router - Compact Industrial IOT M2M 5G Router with Gigabit LAN and WAN Ethernet and Wi-Fi
The Proroute H685 5G is a compact industrial 5G router with 5G sub-6 GHz, 2 x 10/100/1000 Mbps Ethernet and Wi-Fi.
£249.00 ex VAT£298.80 inc VAT Add to basket -
Proroute H685T-W-PoE Compact 4G Router (Supports PoE Power Input)
The Proroute H685T-W-POE is a compact industrial 4G router powered over Ethernet with 4G LTE Cat 4, 2 x Ethernet and Wi-Fi.
£145.00 ex VAT£174.00 inc VAT Add to basket -
LPBEM-6-60-5SP Low Profile Magnetic Mount 4G / 5G Antenna 8dBi Peak Gain
The Panorama LPBEM-6-60-5SP is a low-profile magnetic-mount 4G/5G antenna with 8 dBi peak gain, an SMA male connector and 5 m RG174 cable.
£34.00 ex VAT£40.80 inc VAT Add to basket -
Proroute® H685® WRT LTE 4G CAT6 Router - Compact Industrial M2M 4G Router with RJ45 Ethernet and Wi-Fi
The Proroute H685 CAT6 is a compact industrial 4G router with 4G LTE-Advanced Cat 6, 2 x 10/100 Mbps Ethernet and Wi-Fi.
£140.00 ex VAT£168.00 inc VAT Add to basket -
Teltonika RUT950 4G LTE Router
2 versions availableTeltonika RUT950 4G router with Ethernet, WiFi and Dual SIM card slots for 4G SIM failover.
End of life See the replacement -
LPBEM-6-60-2SP Low Profile Magnetic Mount 4G / 5G Antenna 8dBi Peak Gain - 2m cable
The Panorama LPBEM-6-60-2SP is a low-profile magnetic-mount 4G/5G antenna with 8 dBi peak gain, an SMA male connector and 2 m RG174 cable.
£29.00 ex VAT£34.80 inc VAT Add to basket -
Teltonika RUT955 4G LTE Router
2 versions availableTeltonika RUT955 4G router with Ethernet, WiFi and Dual SIM card slots for 4G SIM failover.
End of life See the replacement -
Teltonika RUT951 Industrial 4G Router with eSIM
4 versions availableThe Teltonika RUT951 is an industrial 4G router with 4G LTE Cat 4, two SIM slots plus eSIM, Wi-Fi 4, four Ethernet ports and digital I/O.
£189.00 ex VAT£226.80 inc VAT Add to basket -
Teltonika RUT906 4G LTE Industrial Router
2 versions availableThe Teltonika RUT906 is an industrial 4G router with 4G LTE Cat 4, two SIM slots, Wi-Fi 4, four Ethernet ports, RS232 and RS485 serial and GNSS positioning.
£145.00 ex VAT£174.00 inc VAT Add to basket
Technologies used: 4G LTE5GAntennas and signalPower over Ethernet (PoE)SIM, eSIM and IP addressingFixed wireless access (FWA)
Typical set-ups
A few cameras and an NVR on a remote site
The NVR records on site and you view it from a phone or the monitoring centre. Upload speed is what matters, so choose Cat 6 or 5G for more than a couple of cameras, and mount a MIMO antenna outside the cabinet.
Typical kit: Teltonika RUT951 or RUT956, a Fullband MIMORAD antenna and a fixed IP SIM.
Single camera on a pole or gatepost
A compact router, powered from the same supply as the camera, or a PoE router that powers the camera itself.
Typical kit: Teltonika RUT200 or Proroute H685T PoE, and a low-profile antenna.
Cameras uploading to a cloud platform
Cloud cameras dial out, so they do not need a fixed IP. A multi-network SIM keeps them online if one network drops.
Typical kit: Any of our 4G routers with a multi-network data SIM sized for the upload.
Things to check before you buy
- Upload speed at the site, not download. Test it where the router will sit.
- How you will view: manufacturer cloud, VPN, Teltonika RMS or a fixed IP SIM.
- Data: cloud recording and long live-viewing sessions use a lot. Recording to an on-site NVR uses almost none.
- Signal inside metal cabinets: put the antenna outside.
Our 4G and 5G router for CCTV guide goes into more depth.
From Teltonika
Teltonika publishes case studies showing its routers in real projects. See: cellular routers for CCTV camera systems, reliable multiple-camera connectivity, secure mobile surveillance with the RUT956. Teltonika's documentation wiki covers set-up for every router we sell.
Talk to an M2M and IoT connectivity specialist. Every site is different. Tell us what you need to connect, where it is and how you want to manage it, and our UK team will recommend the router, antenna and SIM, with configuration options if you want it ready to plug in.
Questions
How many cameras can a 4G router support?
It depends on upload speed and camera settings rather than the router. On good 4G, one to four cameras on sub-stream viewing work well. Beyond that, use 5G or Cat 6 with a good external antenna.
Do I need a fixed IP SIM for CCTV?
Only if you connect directly to the NVR from outside. Cloud cameras, VPNs and Teltonika RMS work with ordinary SIMs.