Teltonika PR3PWUK3

PR3PWUK3 PSU 62.4W

Teltonika UK Power Supply 62.4 W (PR3PWUK3)
This is the official 62.4 W UK power supply designed for Teltonika industrial networking products. It delivers a regulated 48 V DC, 1.3 A output, making it ideal for powering Teltonika PoE switches and other 48 V devices that need a reliable, high-quality desktop adapter.

Using the manufacturer’s own PSU removes the guesswork around voltage, connector type and safety approvals. It is the recommended choice when you want a clean, supported power solution for Teltonika hardware in the UK.

Designed for UK mains and global deployments
The adapter uses a UK Type G plug and supports a wide 100–240 V AC input range, so it is suitable for standard UK installations and sites where mains voltage may vary. It is an AC-to-DC desktop adapter intended for indoor use, with internal design and insulation to meet modern safety and EMC standards.

Because the unit is rated to 62.4 W, it has enough headroom for PoE loads and higher-draw networking equipment without running at its limits. That improves long-term reliability in continuous duty applications.

Optimised for Teltonika PoE switches and 48 V devices
The PR3PWUK3 is commonly used with Teltonika PoE switches such as the TSW series, as well as other Teltonika hardware that specifies a 48 V DC input via 4-pin connector. The 4-pin, 3 mm pitch output plug matches Teltonika’s standard power input, so you get a secure and correct connection with no rewiring or adapters.

If you are powering a PoE switch, this PSU provides the required 48 V bus for PoE ports while supplying the switch electronics from the same adapter. It is a straightforward way to power industrial PoE hardware from a single UK socket.

Industrial-grade design and protection
This power supply is built for professional environments rather than light home use. It includes:

• Stable 48 V DC output with tight voltage tolerance
• Short-circuit protection on the output
• Dielectric withstand testing between primary and secondary
• Certifications to recognised EN safety and EMC standards

The combination of proper isolation, protection and compliance makes it suitable for cabinets, plant rooms, comms racks and other locations where safety and reliability must be assured.

Typical applications
You would choose this power supply for installations such as:

• Teltonika PoE switches in industrial or commercial cabinets
• 48 V DC networking equipment in CCTV, access control or building management systems
• Remote monitoring sites where stable 48 V power is required for networking hardware
• Any Teltonika device that specifies a 48 V DC input via 4-pin connector and needs more power than a low-wattage PSU can provide

Because it is a compact desktop unit with a generous cable length, it fits easily into most installation layouts and control panels.

Key technical details

• Output power: 62.4 W
• Output voltage: 48 V DC
• Output current: 1.3 A
• Output connector: 4-pin, 3 mm pitch
• Input voltage: 100–240 V AC (90–264 V range)
• Input frequency: 50–60 Hz
• Input connector: UK Type G mains plug
• Power type: AC-to-DC, indoor desktop adapter
• Protection: short-circuit protection and safety isolation

Ordering information

• Model: PR3PWUK3
• Description: Teltonika UK Power Supply, 62.4 W, 48 V DC, 4-pin output

If you are unsure whether this is the correct PSU for your Teltonika switch or router, check the device power specification or contact us for compatibility advice before ordering.

Suitable for RUT951 POE and TSW100.