No products in the basket.
Agriculture
Irrigation and pumps
Remote control and alerts for irrigation systems, boreholes and pumps, often far from any building. A rugged 4G router or gateway with inputs and outputs can start and stop pumps, report levels and send an alert when something fails.
Products for Irrigation and pumps
-
Teltonika RUT200 4G LTE Industrial Cellular Router
2 versions availableThe Teltonika RUT200 is an entry-level industrial 4G router: LTE Cat 4, Wi-Fi, two Ethernet ports and a digital input and output in a small aluminium case rated from -40 to 75…
£84.00 ex VAT£100.80 inc VAT Add to basket -
Teltonika RUT956 Industrial 4G Router with RS232, RS485 and GNSS
3 versions availableThe Teltonika RUT956 is an industrial 4G router for telemetry and control: dual SIM, four Ethernet ports, RS232 and RS485, USB, GNSS positioning and a full set of inputs and outputs, including…
£215.00 ex VAT£258.00 inc VAT Add to basket -
Teltonika TRB246 Industrial IoT Gateway
The Teltonika TRB246 is an industrial 4G IoT gateway with 4G LTE, two SIM slots, one Ethernet port, RS232 and RS485 serial, GNSS positioning and digital I/O.
£135.00 ex VAT£162.00 inc VAT Add to basket -
Multi-Network Roaming Data SIM, 30-Day Rolling
Roaming data SIM that connects to the strongest UK network at your site: EE, O2 or VodafoneThree.
£6.50 to £35.75 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page
Technologies used: 4G LTESIM, eSIM and IP addressingIoT and M2MSerial and Modbus
Typical irrigation and pump set-ups
Borehole or pump house alarm and control
Use the gateway's digital inputs for pump running, fault and power-fail signals, and an output to start or stop the pump remotely. Alerts go by SMS or email.
Typical kit: Teltonika TRB246 or RUT956, with a multi-network data SIM.
Irrigation controller with Ethernet or Modbus
Connect the controller so the grower can change schedules and see flow and pressure from a phone or the controller's own platform.
Typical kit: Teltonika RUT200 for Ethernet, or a TRB246 for RS485 and Modbus.
Things to check
- Power: remote pump sites may only have a DC supply. Industrial routers accept a wide DC input.
- Signal in open country: a mast-mounted or directional 4G antenna makes a big difference.
- Coverage: a multi-network SIM can move to another network if one drops.
From Teltonika
Teltonika's wiki covers set-up for every router, including firewall settings for keeping remote equipment secure. Ask us for the right guide for your router.
Every site is different. Tell us what you need to monitor and control and we will recommend the kit. Send us your requirements or call 0300 124 6181.