No products in the basket.
Agriculture
Farm CCTV and livestock monitoring
Cameras for calving and lambing sheds, yards, fuel stores and machinery barns, where the farm's broadband does not reach or the nearest cable is a field away. A 4G or 5G router at the shed, a SIM and the right antenna let you watch livestock and secure the yard from your phone.
Products for Farm CCTV and livestock monitoring
-
Fullband® MIMORAD Outdoor 4G/5G MIMO Antenna 6dBi Peak Gain with 2 x 5m cables with SMA Male Connectors
The Fullband MIMORAD is an outdoor 2x2 MIMO omni-directional 4G/5G antenna with 6 dBi peak gain, 2 x SMA male connectors and 2 x 5 m RG58 cables.
End of life See the replacement -
Teltonika RUT200 4G LTE Industrial Cellular Router
2 versions availableThe Teltonika RUT200 is an entry-level industrial 4G router: LTE Cat 4, Wi-Fi, two Ethernet ports and a digital input and output in a small aluminium case rated from -40 to 75…
£84.00 ex VAT£100.80 inc VAT Add to basket -
Proroute H685T-W-PoE Compact 4G Router (Supports PoE Power Input)
The Proroute H685T-W-POE is a compact industrial 4G router powered over Ethernet with 4G LTE Cat 4, 2 x Ethernet and Wi-Fi.
£145.00 ex VAT£174.00 inc VAT Add to basket -
LPBEM-6-60-5SP Low Profile Magnetic Mount 4G / 5G Antenna 8dBi Peak Gain
The Panorama LPBEM-6-60-5SP is a low-profile magnetic-mount 4G/5G antenna with 8 dBi peak gain, an SMA male connector and 5 m RG174 cable.
£34.00 ex VAT£40.80 inc VAT Add to basket -
Teltonika RUT956 Industrial 4G Router with RS232, RS485 and GNSS
3 versions availableThe Teltonika RUT956 is an industrial 4G router for telemetry and control: dual SIM, four Ethernet ports, RS232 and RS485, USB, GNSS positioning and a full set of inputs and outputs, including…
£215.00 ex VAT£258.00 inc VAT Add to basket -
Teltonika RUT951 Industrial 4G Router with eSIM
4 versions availableThe Teltonika RUT951 is an industrial 4G router with 4G LTE Cat 4, two SIM slots plus eSIM, Wi-Fi 4, four Ethernet ports and digital I/O.
£189.00 ex VAT£226.80 inc VAT Add to basket -
Teltonika OTD140 Outdoor 4G Router
The Teltonika OTD140 is an outdoor 4G router with 4G LTE, two SIM slots, two Ethernet ports and PoE output.
£115.00 ex VAT£138.00 inc VAT Add to basket -
Teltonika OTD500 Outdoor 5G Router (PoE In and PoE Out)
The Teltonika OTD500 is an outdoor 5G router that mounts on a wall or pole, where the signal is strongest, and is powered over Ethernet from inside the building.
£395.00 ex VAT£474.00 inc VAT Add to basket -
Teltonika TSW101 Automotive PoE+ Switch
The Teltonika TSW101 is an unmanaged PoE+ industrial Ethernet switch with five gigabit Ethernet ports and PoE+ output.
£54.50 ex VAT£65.40 inc VAT Add to basket
Technologies used: 4G LTEAntennas and signal5GFixed wireless access (FWA)Networking
Typical farm CCTV set-ups
One or two cameras in a calving or lambing shed
A compact router beside the camera, powered from the shed supply. Night-time viewing on a phone needs steady upload, so mount the antenna outside the shed if the signal inside is weak.
Typical kit: Teltonika RUT200 or Proroute H685T PoE (powers one camera), a low-profile magnetic antenna on the shed roof, and a SIM.
Yard, gate and fuel store cameras
Several cameras recording to an NVR in the farm office or a barn, viewed remotely. Upload speed decides how many cameras you can watch live, so this is where a Cat 6 or 5G router and a MIMO antenna pay off.
Typical kit: Teltonika RUT951 or RUT956, a Fullband MIMORAD antenna, and a fixed IP SIM for direct NVR access.
Remote barns and outlying buildings
Where the building is too far from the house for Wi-Fi or cable, put the connection where the signal is. An outdoor router on the barn wall brings 4G or 5G into the building over one Ethernet cable that also powers it.
Typical kit: Teltonika OTD140 (4G) or OTD500 (5G), with a PoE switch such as the Teltonika TSW101 for cameras.
Things to check before you buy
- Signal at the building: check each network's coverage for the postcode and test on site if you can. Metal sheds block signal, so plan for an external antenna.
- Upload speed: live viewing sends video up from the farm. Use the camera's sub-stream for remote viewing and record full quality to the NVR on site.
- Remote access: camera apps that use the manufacturer's cloud work with any SIM. Direct access to an NVR needs a fixed IP SIM, a VPN or Teltonika RMS.
- Power and weather: industrial routers handle the dust, damp and temperature swings in farm buildings far better than home routers.
From Teltonika
Teltonika's own case studies show how its routers are used for camera systems and on farms: cellular routers for CCTV camera systems, reliable multiple-camera connectivity and livestock emissions monitoring. For set-up detail, Teltonika's wiki covers port forwarding for NVR access.
Every farm is different. Tell us how many cameras, where they are and how you want to view them, and we will recommend the router, antenna and SIM. Send us your requirements or call 0300 124 6181.
Farm CCTV questions
Can I watch my calving shed cameras on my phone?
Yes. With a 4G or 5G router at the shed and either the camera maker's app or a fixed IP SIM, you can view cameras live from anywhere with mobile signal.
How much data does farm CCTV use?
Recording to an NVR on site uses no mobile data. Data is used only when you view remotely or record to the cloud. Occasional checks use little; watching for hours a night during calving uses much more, so choose a plan to match.
Do I need 5G?
Not usually. Good 4G handles a few cameras. Choose 5G or Cat 6 where you need several cameras live at once and 5G coverage is good.