Accessories
Showing 49–81 of 81 results
-
-
-
-
Accessories, Teltonika, Teltonika Accessories
Teltonika BAT120 UPS Battery Backup For Teltonika Routers
Accessories, Teltonika, Teltonika AccessoriesTeltonika BAT120 UPS Battery Backup For Teltonika Routers
Teltonika BAT120 is a compact, industrial grade UPS providing up to 6 Hours Battery Backup for Teltonika routers and devices.
The BAT120 sits in line between the router and the Teltonika mains PSU and provides battery backup in the event of a mains power failure. The BAT120 can also initiate a SMS message via the router to indicate that the mains power has failed.
Ordering Code : BAT120000000
SKU: TELTONIKA-BAT120-N -
Teltonika, Teltonika 4G Antennas, Teltonika Accessories
Teltonika PR1US450
The Teltonika PR1US450 is a compact, angled mobile antenna enhancing signal strength with a 5 dBi gain.
Key Features
- Frequency Range: 700–2700 MHz
- Gain: 5 dBi
- Polarization: Linear
- Impedance: 50 Ω
- Connector: SMA Male
SKU: TELTONIKA-PR1US450-N -
Teltonika, Teltonika 4G Antennas, Teltonika Accessories
Teltonika PR1ICC60 OUTDOOR LTE/WI-FI/GPS ANTENNA FOR RUT9-SERIES ROUTERS
Teltonika, Teltonika 4G Antennas, Teltonika AccessoriesTeltonika PR1ICC60 OUTDOOR LTE/WI-FI/GPS ANTENNA FOR RUT9-SERIES ROUTERS
Teltonika PR1ICC60 Outdoor WiFi/LTE/GNSS Vertical Omni Antenna
Enhance your wireless connectivity with the Teltonika PR1ICC60 – a versatile outdoor antenna designed for LTE, WiFi, and GNSS applications. This high-performance omnidirectional antenna is perfect for boosting signal strength and coverage for your Teltonika routers and IoT devices.
Key Features
- Multi-band support: LTE, WiFi, and GNSS frequencies
- Omnidirectional radiation pattern for 360° coverage
- Rugged IP67-rated enclosure for outdoor use
- Easy installation with pole or wall mounting options
- Compatible with Teltonika RUT9xx and RUTX series routers
SKU: TELTONIKA-ANTENNA-PR1ICC60-N -
-
Teltonika Accessories, Teltonika Switches Power Supplies
Teltonika PR317UKA Power Supply – 62W PSU for TSW Switches
Teltonika Accessories, Teltonika Switches Power SuppliesTeltonika PR317UKA Power Supply – 62W PSU for TSW Switches
Teltonika PR317UKA 62W PSU for TSW200 Network Switch
Teltonika PR317UKA 62W UK power supply for Teltonika TSW Switches
Overview:-
- Input voltage 100 – 240 VAC
- Input frequency 50/60 Hz
- Input current 1.5 A
- Input connector UK (Type G)
- Output voltage 48 VDC
- Output current 1.3 A
- Output connector 2-PIN, with cord end terminals
SKU: TELTONIKA-PR317UKA -N -
Teltonika Accessories, Teltonika Switches Power Supplies
Teltonika PR320UKA Power Supply – 250W PSU for TSW Switches
Teltonika Accessories, Teltonika Switches Power SuppliesTeltonika PR320UKA Power Supply – 250W PSU for TSW Switches
Teltonika PR320UKA 250W PSU for TSW200/TSW202/TSW212/TSW040 Network Switch
The Teltonika PR320UKA is a 250W power supply for use with the Teltonika TSW POE Switches.
Quick Spec:
- Input voltage 100 – 240 VAC
- Input frequency 50/60 Hz
- Input current 3.9 A
- Input connector UK (Type G)
- Output voltage 54 V
- Output current 4.62 A
- Output connector 2-PIN, with cord end terminals
For use with:
SKU: TELTONIKA-PR320UKA-N -
Teltonika, Teltonika Accessories, Teltonika Switches Power Supplies
Teltonika PR3PRUK6 2 PIN 9W PSU
Teltonika PR3PRUK6
Power supply type: Interior,
Input voltage: 100-240 / 90-264 V,
Input frequency: 50-60 / 47-63 Hz.
Product color: Black.
Cable length: 1.2m, Width: 74mm, Depth: 26mm.
Quantity per package: 1 piece (s)SKU: TELTONIKA-2-PIN-PSU-PR3PRUK6-N -
Accessories, Teltonika Accessories, Teltonika Switches
Teltonika PR4DU22K SFP TX TRANSCEIVER
PR4DU22K
Teltonika PR4DU22K is a 1.25 Gb/s SR (short-reach) SFP transceiver for use over multimode fibre up to approximately 550 m. Duplex LC connector, industrial temperature range and designed to plug directly into Teltonika routers and switches with SFP slots.
Key Features:
- 1.25 Gb/s data rate
- Multimode fibre support (typically up to ~550 m)
- Duplex LC connector
- Low power consumption (< 1 W)
- Industrial operating temperature (-40 °C to +85 °C)
- Compatible with Teltonika devices with SFP expansion
SKU: Teltonika-PR4DU22K-N -
Accessories, Teltonika Accessories, Teltonika Enterprise Switches
Teltonika PR4JR20K SFP Transceiver
PR4JR20K SFP transceiver
Expand your industrial network with the Teltonika PR4JR20K SFP transceiver. Delivers up to 1.25 Gb/s over copper RJ-45 cabling up to 100 m, compatible with Teltonika routers and switches with SFP ports. Ideal for sites where fibre isn’t practical.
Key Features:
- 1.25 Gb/s data rate
- RJ-45 copper SFP module
- Supports up to 100 m cable length
- Max power consumption approx. 2 W
- SFP form-factor for industrial switches/routers
SKU: Teltonika-PR4JR20K-N -
Accessories, Teltonika Accessories, Teltonika Enterprise Switches
Teltonika PR4LC21K BIDI SFP Transceiver
Accessories, Teltonika Accessories, Teltonika Enterprise SwitchesTeltonika PR4LC21K BIDI SFP Transceiver
PR4LC21K
Official Teltonika 1.25 Gb/s BiDi SFP transceiver (PR4LC21K) for single-mode fibre links up to 20 km. Simplex LC connector, industrial-grade build, designed for long-distance network extensions in Teltonika switches and routers.
Key Features:
- 1.25 Gb/s data rate
- Bidirectional (BiDi) single-mode fibre up to 20 km
- Simplex LC connector
- Ultra-low power consumption (< 0.8 W)
- Industrial operating temperature range (-40 °C to +85 °C)
- Fully metallic housing for low EMI and excellent ESD protection
SKU: Teltonika-PR4LC21K-N -
Accessories
POE Splitter Adapter
Power your router by POE with this POE adapter. Ideal for powering M2M / IOT routers by POE. Gigabit POE takes 48V POE Source and converts it to 12VDC power with 2.5mm connector and Gigabit Ethernet. This is the easy way to connect and power your 4G or 5G router using standard POE. Also ideal for other network devices that need separate power and Gigabit Ethernet connection using POE.
SKU: POE Splitter-N -
4G Antennas, Accessories, Antenna Cables, Fullband Antennas
Antenna Extension Cable – 3m long – RG58 – SMA Male to SMA Female
4G Antennas, Accessories, Antenna Cables, Fullband AntennasAntenna Extension Cable – 3m long – RG58 – SMA Male to SMA Female
Extend the cable length of your 3G/4G/5G Antenna with this pre-terminated antenna extension cable. It is 3m long and has SMA Female at one end (this is the end that you connect to the SMA Male connector that comes with your antenna) and the other end of this antenna extension cable is SMA Male which will connect to the antenna port of your 3G/4G/5G Router.
Ref : ANT-EXT-SMA-3M-BLACK
SKU: CABLE-3M-RG58-BLK-N -
4G Antennas, Accessories, Antenna Cables, Fullband Antennas
Antenna Extension Cable – 20m long – RG58 – SMA Male to SMA Female
4G Antennas, Accessories, Antenna Cables, Fullband AntennasAntenna Extension Cable – 20m long – RG58 – SMA Male to SMA Female
Extend the cable length of your 3G/4G/5G Antenna with this pre-terminated antenna extension cable. It is 20m long and has SMA Female at one end (this is the end that you connect to the SMA Male connector that comes with your antenna) and the other end of this antenna extension cable is SMA Male which will connect to the antenna port of your 3G/4G/5G Router.
Ref : ANT-EXT-SMA-20M
SKU: CABLE-20M-RG58-BLK-N -
4G Antennas, Accessories, Antenna Cables, Fullband Antennas
Antenna Extension Cable – 30m long – RG58 – SMA Male to SMA Female
4G Antennas, Accessories, Antenna Cables, Fullband AntennasAntenna Extension Cable – 30m long – RG58 – SMA Male to SMA Female
Extend the cable length of your 3G/4G/5G Antenna with this pre-terminated antenna extension cable. It is 20m long and has SMA Female at one end (this is the end that you connect to the SMA Male connector that comes with your antenna) and the other end of this antenna extension cable is SMA Male which will connect to the antenna port of your 3G/4G/5G Router.
Ref : ANT-EXT-SMA-30M-BLK
SKU: CABLE-30M-RG58-BLK-N -
4G Antennas, Accessories, Antenna Accessories
Pole Mount Wall Bracket 20 Inch – J Pole Mount wall bracket for outdoor antennas
4G Antennas, Accessories, Antenna AccessoriesPole Mount Wall Bracket 20 Inch – J Pole Mount wall bracket for outdoor antennas
THIS PRODUCT INLCUDES THE 20″ J-POLE AND THE WALL BRACKET (does not include fixing screws)
J-Pole 20″ bracket – L Shape Wall Mounting Bracket – provides convenient wall mounted J-Pole / L Shaped pole for wall mounting for use with our outdoor pole mounted 4G antennas.
Ref : 20″ J-Pole Mount Wall Bracket
- Height 20 inches
- Depth: 7.25 inches
SKU: POLE-WALLMT-20IN-N
